How to make a Gumball Bubble with Doctor Bob - Balloon Basics 43
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Find all the products from the show here: balloonmarket....
On this BMTV Balloon Basics, Doctor Bob shows us how to create a colourful gumball bubble balloon! A fun design for lots of celebrations, change the 5 inch latex balloon colours to fit any colour scheme.
#BMTV #BalloonBasics #DoctorBob #BalloonTutorial #BalloonMasterclass #BalloonDecor #BalloonArt #BalloonDecoration #BalloonStylist #BalloonIdeas #BalloonArrangement #Ballooninspo
😱 Usa el globo blanco para amarrar , qué buena idea 👏🏻👏🏻👏🏻👏🏻😍
Cool I would put more balloons inside
How do you keep it from deflating after you cut them off… the 5inch ones…?
Hi there; tie them before cutting ☺
Hello, I wanted to know if I’m able to use a 36 inch latex ballon to put small 6inch balloons with helium but have the 36inch with air?
Hi there! We don't advise mixing gases as it can cause the smaller balloons to pop. If you need the balloon to float then you would need to fill them both with helium.
Hi every time I do this my 5 inch balloons have marks on them. I’ve tried doing the 16 inch balloon and then pulling it out but marks are left inside the deco balloon any advice what to do please.
Hi there i had a go at this yesterday and I've noticed today that some of my 5 inch balloons have gone a bit white and chalky inside the bubble . I used helium for both . Do you know why this has happened? Many thanks
The bubble balloons are manufactured with powder inside. We have recently heard if you inflate a latex balloon inside first and then pull it out, it will remove the chalk. A 16" latex balloon should do the trick! It's not something we have tried ourselves but I've seen the advice floating around balloon groups :)
@@BalloonMarket Thank you for getting back i will give it a go!
Hi,
Would you still be able to do this design of deco bubble the night before? Would the latex balloons inside deflate by the next day?
Thanks 😊
Hi there! You absolutely should be able to do it the night before in a Deco Bubble! :) The latex shouldn't deflate the next day, just make sure that you don't mix gasses!
Hello i tried to inflate a transparent balloon but one side is larger than the other side it’s uneven how do I fix it?
Hi! I love the video! I was wondering if you could tell me if both the latex and the clear bubble are filled with helium? Or are the latex filled with air?
Hi Regina! Both balloons are filled with helium. You must not mix gases when creating gumballs :).
Could you please tell me what your helium inflator is called as I can’t find one with the long nozzle like this anywhere thanks
It is called a trigger valve - www.balloonmarket.co.uk/helium/helium-accessories/boc-accessories/trigger-valve-for-use-with-boc-extension-hose-1?cPath=12_52_303&
👏👍
Are those latex balloons fill with helium? What sides balloons are they?
Hi Mari! Yes these are 5" Latex balloons filled with helium placed inside a 24" Deco Bubble Balloon :)
I did this without helium. I put air in both bubble and 5 in latex. The next day my bubble still was great but my 5 in latex were deflating. is there anything to do about that? I also did it with an 24 inch latex balloon and the 5 inch latex the 5 in did not deflate the next day. However I want to use a bubble. Please help.
Hi Tiffany! Was it just the one balloon you had problems with please? Can I ask what brand of 5" you were using please? The 5" shouldn't be deflating, it may have just been a one off!
@@BalloonMarket Balloons were from a local craft store but I just bought some Qualatex and am going to try again. Maybe they weren't tied well or poor quality? so I should expect the bubble and the latex to stay inflated for several days, correct? thank you for your help and videos!
@@tiffanymaddox1264 Yes, I would expect it to stay looking fully inflated for at least a few days. I would try with the Qualatex brand and hopefully you'll get better results. If not, please let me know and I can ask Mark from Qualatex for some advice :)
@@tiffanymaddox1264 Yes we would recommend tying with a 260Q, this should seal it well meaning it'll last a good few days :)
Can I do this with the Anagram crystal clearz?
Although it is not something we have tried and tested, I don't see why not!
You did the click with editing
That's correct - unfortunately we are not actually magic :(
Can u show in detail how that was tied together please
Hi Astrid, do you mean the tying of the latex balloons or bubble balloon?
Balloon Market the last tying where he did the last white balloon And tie the clear one at the same time . Hope I make sense
@@meg.5028 I hope this video helps -th-cam.com/video/zKIDzrn2PIc/w-d-xo.html
Balloon Market yes very helpful thanks!!
can creact dream smp balloon
Hi I did this but the 5inches all popped inside, why? How do I get over this I tried not to overinflate the 5inches too
Hi there! Did you perhaps mix gases? Were the 5" filled with air and the outer balloon helium?