Agilent GC Troubleshooting and Maintenance: Gold Seal Replacement
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- Gold Seals should be replaced after every fourth GC Liner change. In this video, we discuss when to change your GC Split/Splitless Inlet Gold Seal, how to depressurize the inlet, which tools are necessary, how to handle your Agilent GC parts and supplies, and how to properly perform Gold Seal replacement. This video provides step by step instructions for timely and correct replacement of your Agilent GC Gold Seal to ensure accurate, reproducible, and quality results.
The gold seal forms a leak-free seal with the bottom of the inlet body and column ferrule to minimize both sample contamination and sample loss. Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal-to-noise ratio, increase column bleed, and even shorten column life. Using a patent-pending manufacturing process, our inlet gold seals eliminate tiny leaks from machining that can negatively impact your GC performance. Our gold seal is made with a metal injection molding process that provides a consistent, smooth surface, without ridges and grooves from a machined process. The seals are then polished and gold plated for smooth surface. For convenience, the gold seals are carefully packaged with the inlet seal washer.
To prevent loss of active analytes due to adsorption or decomposition during sample vaporization, Agilent proprietary Ultra Inert chemical deactivation process is available on top of the gold plating making the best sealing surface the most inert! Inertness is added to the best sealing surface for inlets. For best trace level analysis, use Ultra Inert gold seals along with other Agilent Inert Flow Path components to obtain inertness from injection through detection.
To view Agilent Split/Splitless Inlet Gold Seals for GC, please visit: bit.ly/42qyq3v
Unsure which GC Liner is right for your applications? Visit our GC Liner Selector Tool at: bit.ly/40risnT
For Inlet Liners, O-Rings, and Seals for Agilent and Third-Party Instruments, please visit: bit.ly/3JYEqZS
#Agilent #GCSeals #GasChromatography
Very helpful, thanks a lot!
Thank. Good. Is it possible to rinse in an ultrasonic bath in a solvent and put it back?
How do you know when you should change the gold inlet washer? Are there particular symptoms that signal when it should be changed?
Can you please make a video on fixing heat escaping error . Please!
What is he function of the gold seal? thanks
It is used for Split methods as on top of it having cutted line to pass splitted portion of sample....and it is use to create the vessel(to form uniform vapours of sample) for sample which is travelled from inlet to top of the column through liner.
♥️
What is a golden seal plate worth in de juwelery store?
why does he handle seals with bare hands?zz