DOC HARLEY: STEERING HEAD BEARINGS

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ก.ย. 2024

ความคิดเห็น • 297

  • @JHV166
    @JHV166 4 ปีที่แล้ว +77

    Have you seen some of the "mechanics" at the local HD dealership? I wouldn't trust them to get coffee...

    • @joalvarez6252
      @joalvarez6252 3 ปีที่แล้ว +7

      Chances are they dont coffee bud! Her name is "Crystal" 🤣🤣🤣

    • @darrinleazer6784
      @darrinleazer6784 ปีที่แล้ว

      Exactly!! I don't trust them either.

    • @earlgallup5223
      @earlgallup5223 7 หลายเดือนก่อน

      Maybe... Not doc but he's a exception to the rule..😂😂😂

    • @earlgallup5223
      @earlgallup5223 7 หลายเดือนก่อน

      They will rip you off quick as a New New York second..

    • @AhkadamaMashiach
      @AhkadamaMashiach 5 หลายเดือนก่อน +1

      Totally, the idea of having them to go through this meticulous process is a little... worrisome lol

  • @wilfredstinissen8309
    @wilfredstinissen8309 2 หลายเดือนก่อน +1

    Hi Doc. I need to adjust the fallaway. Manual says "adjust the fork adjuster nut/bolt until the measurement is within limits" Where on the '05 Fatboy is the fork adjuster nut/bolt? Is it under the chrome cap on the upper center of the tripple tree?? What tool(s) will I need to adjust the "nut/bolt? I hope you can help with this one. Thanks in advance. Best regards, Wilfred

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 หลายเดือนก่อน

      Sir if you have to ask then you have not invested in a Factory Service Manual so save your money and bring your bike to the shop of your choice…..Doc

  • @mwhitelaw8569
    @mwhitelaw8569 3 หลายเดือนก่อน +1

    Any doubts
    Pull em
    Cheap insurance
    Do the swingarm too

  • @randykynard5657
    @randykynard5657 ปีที่แล้ว

    I wouldn't take my bicycle to the Harley shop $500 to change oil y'all robbing people

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  ปีที่แล้ว

      That’s your opinion. Have fun on your bicycle. BTW where do you change the oil on your bicycle?…..Doc

  • @thangknowa3288
    @thangknowa3288 6 หลายเดือนก่อน +3

    A Buddy told me His front wheel keeps pulling away from straight ahead and turns in the direction of the closest beer joint on the side of the road. I told Him to ignore the "Pull", and instead head to the house and work on the issues at home.

  • @dougfresh1341
    @dougfresh1341 5 ปีที่แล้ว +9

    Great info. Thanks for the another nice video.
    Many comments of bikers who hate their HD service shop. I'm liking mine less and less.
    Word of advice: BUY A FACTORY SERVICE MANUAL.
    If you maintain your own bike do it right. Stick to the maintenance schedules. Also, the loosy goosy, wobbly front ends can be a result of other issues. Namely tires, load, add-ons.
    Check your tires first. Most of you have 7-10k miles on your tires and I'm willing to bet they've got excessive cupping and are out of balance... why?, because the last time you checked air pressure was the month of never. No bueno.
    If you're still reading, HD tire service is exactly why I've been my main tech service manager for years. Look... take your bike to the HD shop and price a new set of tires for an Electra Glide installed. How much??.. Yeh, $900 for the pair. WTF??!
    $250+ for a rear tire that last, what?.. 15,000 miles?! Plus install, etc.
    If you find a good Service Mgr and a good Service Tech, make them your best friends. ;-)

  • @jeffreylonigro1382
    @jeffreylonigro1382 5 ปีที่แล้ว +38

    “Bring it to a Harley Davidson dealer to replace or lubricate the neck bearings...”🤣🤣. That’s funny.

    • @johncavar2914
      @johncavar2914 5 ปีที่แล้ว +12

      How do you know they will replace your bearings, most are highway 🛣 robbers

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +5

      I bet you have that feeling when it comes to anyone working on your stuff. Whether it's a mechanic working on your cars or bikes, a hvac guy working on your ac, and probably even carpet cleaning services cleaning your dirty carpets. Seems like the issue is you and not trusting anyone, not the people performing the work

    • @jeffreylonigro1382
      @jeffreylonigro1382 5 ปีที่แล้ว +10

      John Cavar my point exactly, dude. I used to work at a dealership. The dealer (in 1995) was allocated 110 bikes. He averaged $3,000 profit to The dealership per bike. He made another $300,000 a year on service work. He made 600k/yr while paying his employees nothing for the privilege of working in a Harley shop. Service was $80/hr and the mechanic made like $18/hr. Most of the wrenches were honest, but one guy was lucky if he did half the work they billed for. He would skip oil changes...all sorts of stuff.

    • @jeffreylonigro1382
      @jeffreylonigro1382 5 ปีที่แล้ว +14

      Anita Bongshit...is that directed to me or John Cavar? I trust my mechanic but the duct cleaners did a terrible job. And the body shop that recently repaired my car did a terrible job. Took it back...now the bumper cover is falling off. Some people really are hacks. A lot of people aren’t where they belong in life.

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +1

      @@jeffreylonigro1382 i agree and sad to say such is the way off life. I really was directing that to the commenter and completely forgot to tag him.

  • @ernestbaca306
    @ernestbaca306 3 ปีที่แล้ว +1

    Stop and take it to your Harley service center, ha ha ha you are funny😜
    Dealers are crooks who only want to sell you crap all the time
    I went to the parts Dept one time after I bought my bike new from the dealership to buy some accessories that I don’t remember, the first thing they asked me was “who was your sales person?” I asked him why, and he just said they need to help you 🤨 I told the guy behind the counter “the sign says that his is the parts Dept or am I wrong?” I don’t need the sales person I just need the part, will you sell it to me or do I have to go somewhere else? Always trying to sell you something every time you walk in the place🤨

    • @rudeawakening3833
      @rudeawakening3833 ปีที่แล้ว

      So sorry that you had that happen ; I too have had various experiences in the 43 years I’ve been going to HD dealerships .
      I do ( most ) of my own work , for the majority of the 13 HD’s I’ve owned .
      With my first brand new 2018 FXLR
      experience , I found a wonderful dealership that I feel has integrity .
      They allow me to meet and get to talk to and know and build a rapport with my HD mechanic that I ask for by name when I bring it in .
      This being a “ new school “ machine that is NOTHING like the pan head , iron Sportsters , and (6) shovel heads that I’ve owned in the past , I find myself having them do my service work ; and I feel good about it .
      Just like any business out there ; they certainly aren’t all the same .
      I hope perhaps that you might go to a different dealership and have a better experience there .
      Peace Out .

  • @r.taylor7293
    @r.taylor7293 5 ปีที่แล้ว +5

    I just had mine done today June 6... Pretty cheap from Hannums Harley davidson of Chads ford, PA...100% better ride

    • @WTDOOR63
      @WTDOOR63 5 ปีที่แล้ว +1

      R. Taylor how much did they charge to adjust?

  • @PkwyDrive13
    @PkwyDrive13 3 ปีที่แล้ว +1

    The problem is half the mechanics at these Harley dealers are... Idiots to be honest. I don't trust them anymore after taking my fxdls in for new wheel bearings that were CLEARLY bad with noticeable play where the rear wheel would wobble and clunk. They said it was normal, I said no, it's not, replace them. And they did of course but...idiots.

  • @davefunk1466
    @davefunk1466 9 หลายเดือนก่อน +1

    @LowCountryHarleyDavidson Hey Doc - at about 6:30 into the video ("late model touring machine"), you state that the adjustment is too tight. But since the wheel came to rest inside of the first mark, this is too loose according to the factory manual (2018 Touring). "Too loose" makes better intuitive sense as well - the wheel moved too far (looser makes the wheel move back faster and further). Additionally, the distance between those last two marks is too small, and the factory manual says this means "too loose".

  • @rickybobby8224
    @rickybobby8224 2 ปีที่แล้ว +2

    Ironically those of us who might need to take it to the dealer have a bike too old for a Harley Dealer to touch. Good ole MoCo...

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 ปีที่แล้ว +1

      This is a Topic I wish MoCo would address. Each Year the dealers look at the bottom dollar and the experience in the Service Dept. ( a lot of young Techs now with no pre-TC knowledge and experience) and make the choice to limit what years the accept. I am blessed to work at a dealership that keeps me on for this reason....Doc

    • @rudeawakening3833
      @rudeawakening3833 ปีที่แล้ว +1

      @@LowCountryHarleyDavidson
      Wow … my respect for YOU , Doc AND your employer at Low Country HD just went up a notch !
      That is a” stone “ in a lot of rider’s boot that own the “ old school “ stuff !

  • @CasperWen
    @CasperWen 4 ปีที่แล้ว +2

    Hi dr.harley
    I bought a 1993 FLHTP
    Recently
    And put the new tires on,also repack bearings
    When I have a ride,I got some wobble (not like death wobble,more like all bike left and right)
    I did adjust my neck bearing after first ride,but still the same.
    And it happened around 70-85 random, sometime 80 sometimes 75, sometimes nothing happened when 90.
    Is that probably that big windshield this bike have caused the issue?

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  4 ปีที่แล้ว +1

      First let me say you are diagnosing very well. New Tires with new bearing was an excellant start. Lubing and adjusting neck bearing was the next step. Next would be to check the front rubber mount. Is it in good condition? Most wear out. Next secure the bike, lift rear end so tire is just off the ground. Remove lower shock bolts. Now grab the swing arm and tire and try to move it side to side. Rear rubber mounts might be worn out allowing the rear to move which would effect your ride. Finally you are correct about the fairing. The faster you go the more wind pushes the barn door fairing. Thanks ~ Doc

  • @TroyMalham
    @TroyMalham 3 หลายเดือนก่อน +1

    Doc I have a 2006 springer Softail doing a steering head bearing adjustment the repair manual says to lift the bike with both wheels off the ground equally no matter where I put the jack they are not equal I've even tried shims between the jack and frame what am I doing wrong. Thanks

  • @Beach5289
    @Beach5289 2 ปีที่แล้ว +4

    Finally a good video on the procedure for late model touring bikes , this really simplifies this check for me.

  • @rjr179
    @rjr179 2 ปีที่แล้ว +1

    By setting colours does that stop the stupid rainbow startup or is there any way to turn that off? Drives me crazy I just want it to boot in the colour set.

  • @austinrodriguez7628
    @austinrodriguez7628 3 หลายเดือนก่อน +1

    Great. A video of what the manual says. Not an actual video of fixing the issue. I can't stand this guy. His answers are always bring it to a harley dealer. I'll never ever do that.

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  3 หลายเดือนก่อน

      Thanks for the visit. Wave when we see each other on the road Not here….Doc

  • @scootorshoot6
    @scootorshoot6 ปีที่แล้ว +1

    My 17 FLHXSSECVO
    swingback turning left almost returns to center. Turning right it barely comes back at all. Like it even get to the cardboard. What does that mean??

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  ปีที่แล้ว

      It means,”When was the last neck bearing serviced and adjusted?”…..Doc

  • @garyzanghi9272
    @garyzanghi9272 ปีที่แล้ว +2

    Never in my 56 year's have i heard of this

  • @kennethwise7108
    @kennethwise7108 4 ปีที่แล้ว +2

    Have a Harley Davidson technician conduct a proper fall away procedure. Often overlooked, I've got well over 600,000 miles on my ass and have several owned HD's. Also ensure that the front motor mount has a 7/16" bolt in the center in lieu of a 3/8". You wont have any more problems guaranteed. If it still wobbles take it back to the dealership and tell them you aren't happy with the fall away and that you want it redone. If they give you a hard time speak to a manager. If the manager doesn't want to help you take it up with Corporate HD.

  • @johncasor9698
    @johncasor9698 5 ปีที่แล้ว +3

    @ 2:24 when you push and pull and it clunks it could be the fork bushing in the lower slider DOC... just say`n .............

  • @johncavar2914
    @johncavar2914 5 ปีที่แล้ว +2

    How do we know Doc Harley is not the legend disc jockey ..wollfman Jack ..some one made a comment Doc Harley would have a great voice for talk back radio 📻 or radio itself , I agree ☝️

  • @cliffdavis762
    @cliffdavis762 ปีที่แล้ว +1

    You keep yelling to take the G-damn motorcycle to the dealer! We are not watching this to take our bikes to the dealership!

  • @GorillamansGarage
    @GorillamansGarage 4 ปีที่แล้ว +1

    2016 FLYRU (Road Glide Limited).. Head bearings are not adjustable. Is this check method the same for the FLTRU?

  • @psychlism
    @psychlism 10 หลายเดือนก่อน +1

    I'm curious why you need to jack up the rear wheel. Is this just to keep the bike level?

  • @garyh5176
    @garyh5176 3 ปีที่แล้ว +4

    I understand the importance of this process but it seems so silly, especially this day in age. Thanks Doc for the info!

    • @lenjames
      @lenjames ปีที่แล้ว

      Not silly....When I bought my new 2019 touring bike I had a wobble. Sure enough right from the factory it was out of spec. What's silly is your remark.

    • @garyh5176
      @garyh5176 ปีที่แล้ว

      @@lenjames the process is silly, not the fact it needs to be checked and corrected if out of spec.

  • @hugieflhr03
    @hugieflhr03 2 ปีที่แล้ว +2

    I guess this is Harley’s way of denying the death wobble as a design flaw. But I did enjoy the video. I don’t ever remember seeing the dots and tapping methods to set the steering head preload. I would also temperatures would have a very big effect on theses measurements.

  • @moursymansour7848
    @moursymansour7848 4 ปีที่แล้ว +2

    If the distance between the two marks is short then it is loose, if the distance between the marks is long then it is tight
    Recheck the video on the Dyna starting the minute 3:57
    Please correct me if I am wrong

  • @corneilcorneil
    @corneilcorneil 5 ปีที่แล้ว +12

    I guess that you recieve a dollar for every time you say the words HD 🤣🤣

    • @Krusty-
      @Krusty- 3 ปีที่แล้ว

      he even named himself doc harley...

  • @rogofam
    @rogofam 6 หลายเดือนก่อน +1

    I asked my Harley dealership to check if I needed new tires and emphasized that I needed air in the tires. They said my bike needs new tires and that the air pressure was checked. About a week later another biker flagged us down and said my rear tire was low. It was extremely low on air. My wife and I were riding that bike on the freeway! I lost trust in Harley dealership mechanics that day!

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  6 หลายเดือนก่อน

      Was it the Tech or something in the tire?

    • @michaelschaefer3124
      @michaelschaefer3124 4 หลายเดือนก่อน

      You can't check your own tires. If that's true, you shouldn't be riding a motorcycle.

  • @kevinwest3689
    @kevinwest3689 2 หลายเดือนก่อน +1

    You lost me and take it to a dealer. Tarwan I watched this to see how YOU said to do it. and second If I take my shovel head to a dealer. They look at it like a three legged cow with two heads.

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 หลายเดือนก่อน

      You have proven to us our videos are not for everyone, we are not showing how we do our jobs and how not everyone chooses to purchase a Harley-Davidson Factory Service Manual to work in their own bikes. Thanks for your post…..Doc

    • @kevinwest3689
      @kevinwest3689 2 หลายเดือนก่อน

      @@LowCountryHarleyDavidson well" bless your little hart. I've got a Service manual. And I've probably been building and riding bikes since you were sucking your mother's tit- Boy. Yeah your video is not for anyone looking for a how to video. Good call. And just because I know how to do something doesn't mean someone might have better ideas or techniques. If you wete a newbie and ran across your response to my comment. What would you do? 💡

  • @rnich56
    @rnich56 3 ปีที่แล้ว +2

    @ 6:48 , if no.3 marks are inside of the no.1 marks, it is too loose, not tight.

    • @jeffthrobodeen
      @jeffthrobodeen 3 ปีที่แล้ว

      I agree. too loose according to the SM

  • @shNECful
    @shNECful 3 หลายเดือนก่อน +1

    PLEASE BE IN GOOD HEALTH

  • @stevehudson7429
    @stevehudson7429 ปีที่แล้ว +1

    Take it to the dealership 😂

  • @thomaswalker6041
    @thomaswalker6041 5 ปีที่แล้ว +10

    Doc Harley, I love you and your videos ... I’ve watched them all and have learned so much, You sir are the man.

  • @archer4556
    @archer4556 5 ปีที่แล้ว +5

    Fantastic vlog Doc, I love the way you constantly state "Take it to your Harley Davidson dealer if there is a problem" it's amazing how many people will ignore your sound advice.

    • @Big.Ron1
      @Big.Ron1 5 ปีที่แล้ว

      Some of us can do the repairs at home. However a lot cannot and do need to take it to a shop. You absolutely do not want a high speed wobble.

    • @phillott4181
      @phillott4181 2 ปีที่แล้ว +1

      You bought a Harley...that comes with it. Why would you buy something that has a terrible service record, cost more than anything like it, and it will just decide not to crank at the most inopportune moment...I have had Yamahas for as long as 20 years and never had the head off....

    • @kjknuth9127
      @kjknuth9127 2 ปีที่แล้ว

      Because they don't work on my bikes anymore

    • @Doobie603
      @Doobie603 2 ปีที่แล้ว

      @@phillott4181 All the bikes in my father's and my own garage have fantastic service records. Stop living in the AMA days, Harleys have been THE MOST reliable bikes I have ever ridden. Problems I have seen are 9x out of 10 the riders fault and negligence in maintaining the bike. You can't leave your bike in the rain and snow and expect nothing to rust you know what I mean? Your statement is just such BS and it gets sooo old to listen to you know nothing morons. Sorry you can't afford one.

    • @rudeawakening3833
      @rudeawakening3833 ปีที่แล้ว

      @@phillott4181
      Then why are you watching this video ?

  • @ampegloud
    @ampegloud 4 ปีที่แล้ว +1

    I've been working on bikes since 1974 and I had my own shop the pointer gizmo thing that you made I mean you can use it but you don't really need that maybe they taught you in school that you need that you don't if you've got experienced and know what to feel for you shouldn't have a problem

  • @MrHellspawn4001
    @MrHellspawn4001 5 ปีที่แล้ว +1

    What if bike was purchased from dealership tat states 40k checks and services were complete on the bike prior to purchase should I take it to another shop to verify

  • @bikersoncall
    @bikersoncall 3 ปีที่แล้ว +1

    2009 Ultra, I guess mine is more similar to the 'late model' touring than the Dyna,
    the checking method looks hella complex , yikes...
    Can I just replace the head bearing since I have almost 40k mi (poss orignal bearings)
    on the bike and torque so factory spec?

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  3 ปีที่แล้ว +1

      You are close enough to the 50K Service where those bearings are checked, Serviced/Replaced. But there is no factory torque. It is the same adjustment process. Thanks ~ Doc

    • @bikersoncall
      @bikersoncall 3 ปีที่แล้ว +1

      @@LowCountryHarleyDavidson Thank you..

  • @krishaney1772
    @krishaney1772 2 ปีที่แล้ว +1

    I just put a 26 inch rim on a 2001 ultra classic with American suspension Bolton kit. For some reason at low speeds taking off and slowing down to go around corners, it gets a very bad wobble back-and-forth in the handlebars. Any ideas what could cause this? It has brand new tires and the bearings were checked.

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 ปีที่แล้ว +1

      Too many aftermarket items for my knowledge. Did you modify the rear suspension to a lower setting? It could be geometry is fighting you making the front end light. (even though most 26 front weigh a ton) contact American Suspension for possible adjustment needed...Doc

  • @heathjude50
    @heathjude50 ปีที่แล้ว +1

    Are you saying it should swing back to between the opposite side green and black marks?

  • @lqqkout4thedude
    @lqqkout4thedude 2 ปีที่แล้ว +1

    On my HD touring bike to check the fall-away, along with removing the clutch cable, am I also supposed to remove my aftermarket radio, amp, speakers, ram mounts, auxiliary lighting attached to the brake bolts (motolights), auxiliary accessory switch housing kit, etc?

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 ปีที่แล้ว +2

      How is a Factory procedure designed for a stock HD supposed to work on customer's aftermarket modified motorcycle?...Doc

  • @BrewCityRider
    @BrewCityRider 5 ปีที่แล้ว +1

    Couldn't you use a regular motorcycle lift to get your tires off the ground? So does the Harley dealer include these tests during a 10,000 mile service? Honestly, I'd be surprised if they did. Good demo of these tests...seems simple enough. I'll include them when I grease my steering head bearings every 10k.

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  5 ปีที่แล้ว +1

      Would depend on the lift & your guts. It depends on your dealership, the year of your motorcycle and the model if it’s included in the service.

  • @davefunk1466
    @davefunk1466 9 หลายเดือนก่อน +1

    @LowCountryHarleyDavidson Doc - thank you, as always for all the great information you provide!! I have been struggling a bit with the subjective nature of the fall away test on my 2018 Road Glide Special. To eliminate the interpretation of when the wheel starts to move back, why not simply find the point where letting go of the wheel results in a less than one inch movement back and then take a measurement between those two points? Then adjust the bearings until that distance is to spec. This is completely objective - do you see any issues doing it this way?

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  9 หลายเดือนก่อน

      Your posts are very informative with great thought. As a HD tech I blindly follow the Service Manual. Always striving to the tight specs…..Doc

  • @terrytorbett5913
    @terrytorbett5913 4 ปีที่แล้ว +2

    Thanks for the teaching videos

  • @Chudsaves
    @Chudsaves ปีที่แล้ว

    Wow. This test was def developed by Harley. Haha. It’s really a joke. There are much better ways but I’m sure this will work.

  • @jamesanderson83
    @jamesanderson83 5 ปีที่แล้ว +2

    Question, is this the same as the dampening adjustment knob used on some pre 60s vintage bike Shop? Thanks.

  • @rrvallance
    @rrvallance 2 ปีที่แล้ว +2

    Great information thank you.

  • @gregmcbee2585
    @gregmcbee2585 5 ปีที่แล้ว +2

    Thx Doc. That's the video I've been waiting for. Is the front wheel completely off the ground? Looks like they touching a little in video

    • @davypig571
      @davypig571 5 ปีที่แล้ว +3

      It has to be off the ground! If it drags anywhere the test doesn’t work.

    • @gregmcbee2585
      @gregmcbee2585 5 ปีที่แล้ว +1

      @@davypig571 thank you. That what I thought.

  • @RC51tourqe30
    @RC51tourqe30 5 ปีที่แล้ว +2

    I have the same 2019 Street Glide Special
    At any speed above roughly 45-50mph if I hold only one bar (usually the throttle side) the whole front end wobbles heavily. But when I use two hands I can calm it down but still feel it strong enough to be concerned!
    It has just over 3,000 miles on it and the 1000 mile service has been done.
    Any advice?

    • @bobs.5609
      @bobs.5609 5 ปีที่แล้ว +2

      Interesting. I just bought a new 2019 Street Glide Special 6-4-2019 with only 6 miles on it. I noticed within the 1st mile the frontend wobble. I took it right back to the dealership and they still have it. Best way to notice this is 4th gear. Let off the throttle with the speed reducing from 50 to 30mph. My sales guy was shocked as well when he rode it. Needless to say it's not right.

    • @steveb.6267
      @steveb.6267 5 ปีที่แล้ว +1

      Make sure your back wheel is properly aligned up with your front wheel. Best done with a straight edge or you can use string. Most wobbles are caused by bad rear wheel alignment.

    • @777mycoolangelo
      @777mycoolangelo ปีที่แล้ว

      I am sure wobble was fixed….what ended up being the issue? I have a 2019 SGS. Put 21 inch wheels up front and 13” legend Revo A shocks in back. I get the wobble around 45mph when i let go of the steering.

    • @rudeawakening3833
      @rudeawakening3833 ปีที่แล้ว

      That is SO unusual .
      I bought a 2018 FXLR and haven’t had this issue .
      I’ll be paying special attention ; I’m assuming that this is “ obvious “ ?

  • @chrisphilhower6029
    @chrisphilhower6029 5 ปีที่แล้ว +1

    If I remember correctly, Isn't the Steering Head bearings checked at the 5k(And up) Service Intervals?

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +1

      No. Older touring bikes pre 2014 and ask the rest of the models it's every 10k and 2014 and later touring is every 25k

  • @gbuilds2667
    @gbuilds2667 ปีที่แล้ว +1

    Doc do I need to reset mine if I do a SG to RG conversion?

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  ปีที่แล้ว +1

      Yes! Because of the weight difference to the front forks…..Doc

    • @gbuilds2667
      @gbuilds2667 ปีที่แล้ว

      @@LowCountryHarleyDavidson thanks DOC

  • @luisvelez1134
    @luisvelez1134 2 ปีที่แล้ว +2

    Doc excellent explination. Keep up the great work.

  • @John-cc1pc
    @John-cc1pc ปีที่แล้ว +1

    Excellent. Brilliant clear explanation. Thank Doc You are a true brother 👍🤜

  • @bm7760
    @bm7760 4 ปีที่แล้ว +1

    Enjoy these videos but in this one he gets too loose and too tight back to front. If the fall-away is late in the swing then the steering head bearings are too tight, and vice versa. It's a pretty crude measure. Why can't HD just give a setting?

    • @aaronbrown5252
      @aaronbrown5252 2 ปีที่แล้ว

      The range is the setting and it's very accurate because it's taking into account what the bike is actually doing. It takes repeated head bearing adjustments under your belt to get the hang of what's just right.

  • @WilliamBates-xk6mt
    @WilliamBates-xk6mt 5 ปีที่แล้ว +2

    Hey doc watched the comparator vid was wondering at what mileage should i start considering replacement

    • @08StreetGlide
      @08StreetGlide 5 ปีที่แล้ว +1

      When you notice you have a problem with it....

    • @WilliamBates-xk6mt
      @WilliamBates-xk6mt 5 ปีที่แล้ว +1

      @@08StreetGlide 10-4 only have 18000 on my 08 ultra

    • @WilliamBates-xk6mt
      @WilliamBates-xk6mt 5 ปีที่แล้ว +1

      @@08StreetGlide thanks brother

    • @08StreetGlide
      @08StreetGlide 5 ปีที่แล้ว +3

      @@WilliamBates-xk6mt I replaced mine in June. Went with Baker, also Baker manual chain tensioner. I noticed my bike was hard to start, sounded like rocks in primary when shut down, and when approaching a stop after throttle roll-off and prior to grabbing the clutch handle when I had coasted for a while, the bike would kinda surge.....fwd...aft....fwd....aft....it was the spring pack.....weak as f#$k....

  • @shanewalker2257
    @shanewalker2257 4 ปีที่แล้ว +1

    Just replaced mine 2yrs old 25000km on 2018 sport glide. Totally rusted up. Never pressure washed and only ridden in rain couple times. Always garaged.

    • @viel.anthony
      @viel.anthony 3 ปีที่แล้ว

      Dang... They last 130k km (75k miles) on my 30 year old Goldwing 1500...

  • @chad8946
    @chad8946 ปีที่แล้ว +1

    Thanks doc, much easier than other explanations ive seen on measuring fall away

  • @tennesseebound6597
    @tennesseebound6597 ปีที่แล้ว +1

    Doc, how about an update on checking head bearings on the new softails, its totally different, no fall away settings, its a pull force now.

  • @jimweagant8920
    @jimweagant8920 5 ปีที่แล้ว +2

    Great video and information thanks

  • @trustyhicks7450
    @trustyhicks7450 3 ปีที่แล้ว +1

    Is this done during your regular service intervals?

  • @nickhildabridle1612
    @nickhildabridle1612 5 ปีที่แล้ว +6

    DOC. Absolutely great video and very informative. LTMV & #unt ;;;

  • @Jeff-t1u
    @Jeff-t1u 7 หลายเดือนก่อน +1

    Hi there have you done a video on Springer front end adjustments and steering head bearings ?

  • @Rif_Leman
    @Rif_Leman ปีที่แล้ว

    The marks being close together indicates that the bearings are too tight?

  • @johncasor9698
    @johncasor9698 5 ปีที่แล้ว +1

    now this is a great video... and something that everybody should be checking. but this is not how i was trained to check bearing play... but this is better then looking the other way and not checking it. but it is a start...

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +1

      What ever way you were trained was not the way it is in the manual. Not saying what you do is wrong because there is more than one way to skin a cat

  • @CzarWilkins
    @CzarWilkins ปีที่แล้ว +1

    Well, I learned something new today!!! In my case I need complete new forks.

  • @Ken-wu6hr
    @Ken-wu6hr 3 ปีที่แล้ว

    I have a 08 FLHTC WITH 7200 mi. I got it used so it sat. I was thinking about having my Bearings cleaned & Inspected. And set. And my Front forks oil changed. Is that a good idea? I am a automotive technician so most work I’ll do myself. Not that though

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  3 ปีที่แล้ว

      Yes, Anytime you buy used it's great to start with new so you can schedule maintenence...Doc

  • @stevegazo9512
    @stevegazo9512 2 หลายเดือนก่อน +1

    How did they get too tight….

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 หลายเดือนก่อน

      Lack of lubrication….Doc

    • @stevegazo9512
      @stevegazo9512 2 หลายเดือนก่อน

      Thanx Doc. I have my 2014 Street Glide up and she’s very tight. I guess since we can lube them they fail fast.

  • @tylerfj24
    @tylerfj24 5 ปีที่แล้ว +2

    DOC been waiting to see how this is done thanks!!.. I have an 18 street glide like the one in the video... IF we have 21" wheels on the bike, this extra weight has to play a difference.. what do we do in this case? Or do we follow the same procedure?
    thanks again

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  5 ปีที่แล้ว +2

      Sorry can’t give you any advice haven’t to run into this in the shop yet

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +3

      Yes it makes a difference just like riding with 16-20 inch apes makes a difference. Hd manual adjustments are for stock bikes

    • @tylerfj24
      @tylerfj24 5 ปีที่แล้ว +1

      @@anitabonghit266 yes of course it does.. we arent debating that.. i was just asking what the new numbers or measurements would be

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +1

      @@tylerfj24 there is no started numbers for that. It becomes doing it by feel which comes from years of doing it

    • @thejerseyj5479
      @thejerseyj5479 2 ปีที่แล้ว +1

      @@anitabonghit266 Anita Bonghit, me too !

  • @anthony123G
    @anthony123G 5 ปีที่แล้ว +1

    If the fall away is correct on a dyna and I’m still getting a decel wobble with my hands resting on the bars, can it be a bad motor mount or mounts, possibly tire?

    • @corneilcorneil
      @corneilcorneil 5 ปีที่แล้ว +1

      Can be your tire (even rear one) or tire pressure. "Can be" ...

    • @anitabonghit266
      @anitabonghit266 5 ปีที่แล้ว +1

      Or it could be spokes if you have a laced wheel. Or pivot shaft or bad wheel bearings

  • @candlebright100
    @candlebright100 3 ปีที่แล้ว +1

    this is some technical stuff

  • @rugershooter5268
    @rugershooter5268 2 ปีที่แล้ว

    Swing back test doesn't seem logical......seems like it should always stop inside first mark

  • @tc223
    @tc223 5 ปีที่แล้ว +6

    One of my favorite channels.. thanks Doc & crew!

  • @riverajr47
    @riverajr47 2 ปีที่แล้ว +2

    It makes no sense that harley davidson is building machines that are so mechanically sensitive.
    Love the bikes but a more reliable and longer lived machine is a better option for me thank you doc I have enjoyed your videos and u steered me in the direction I need to go.

  • @kevindry3850
    @kevindry3850 3 ปีที่แล้ว

    All this channel is a commercial to promote taking your harley to the dealership. I am sure there are some good dealerships out there but everyone I have ever been in a trying to pull one over on you the sec you walk in.

    • @rudeawakening3833
      @rudeawakening3833 ปีที่แล้ว

      I disagree- respectfully .
      There are many videos that explain what to do for the -
      “ do it yourselfers “ .

  • @ThePeopleVerse
    @ThePeopleVerse 3 ปีที่แล้ว

    It seems any time I take a bike to HD dealer it costs me 600+ $$....for practically anything.
    What should a check and then lube and adjustment cost?
    No parts, or extras. Let's assume it just needed a cleaning, lube and adjustment.
    Can you give us a ballpark?

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  3 ปีที่แล้ว

      Too many variables. Year of bike, condition of bike, model of bike, accessories you’ve added to front end of bike ie chrome covers, lights, custom wheels and what area in the world you live. I try not to quote labor. Here in Charleston, SC is a whole lot different than New York, Saudi or Central America. Thanks ~ Doc

    • @ThePeopleVerse
      @ThePeopleVerse 3 ปีที่แล้ว

      @@LowCountryHarleyDavidson ok

  • @AhkadamaMashiach
    @AhkadamaMashiach 5 หลายเดือนก่อน +1

    Thanks!

  • @motorcyclestoriesbydarkdave
    @motorcyclestoriesbydarkdave 8 หลายเดือนก่อน +1

    Same with a trike?

  • @johncavar2914
    @johncavar2914 5 ปีที่แล้ว

    Best way ride responsibly
    Steer clear motorcycle 🏍 mechanics 🧰
    Check your tires , brake pads , lights blinkers
    If you find a good motorcycle mechanic that’s a lottery

  • @Otis884
    @Otis884 5 ปีที่แล้ว +1

    Hey Doc,
    What grease should you use on the head bearing for a 2010 Road King. Your the best , thanks Doc.

    • @dougfresh1341
      @dougfresh1341 5 ปีที่แล้ว +3

      Bernie, this is a great question. Our HD shop uses something similar to S1000 Lucas HD grease when they replace SH bearings. BUT, if you go to the parts counter and buy bearing grease, they sell you Harley "Special" HD grease.
      So what they put in the shop is diff from what us DIY guys inject when we maintain our bikes.
      WTF?! Everyone knows you shouldn't mix lube types.
      So I had to go back and ask twice WTH the tech guys were injecting so I could duplicate when I greased up. Fuck!
      Another thing, the Harley "Special" SH grease is shit. Kept a tube in my tool box and when maintenance time came, the grease had liquefied and run all over... So what d'ya thinks gonna happen to that grease on a 90 degree day in the Black Hills of SD?? Doc??... Yeh, it's gonna run out of those bearings.
      The answer is, after the shop replaces your SH bearings at 50k miles, don't leave the service counter until they give you the name of the exact grease they used. Then buy it on Amazon or whatever.
      THIS is why many bikers begin to work on their own shit.
      Doc, good video. Thanks for the info and effort. The 9 downvotes must own Victory bike owners.

    • @jpdbeach
      @jpdbeach 5 ปีที่แล้ว +3

      Marine grease. Red hi-temp

  • @isaachuerta
    @isaachuerta 5 ปีที่แล้ว

    Stop Right THERE AND TAKE IT THEIR...?

  • @johncavar2914
    @johncavar2914 5 ปีที่แล้ว

    Well bottom line , a mechanic that won’t take you for a ride
    Simple we pay 💰 hard earned dollars , most consumers would like to be well informed and we know labour is expensive, but value for money and not being ripped off !

  • @davidnanze8697
    @davidnanze8697 5 ปีที่แล้ว +1

    Another good one Doc. never gave that much thought. How often do you recommend it should be checked. Also i beleave my bike has a grease fitting on the steering head. how often should that be greased? Thanks

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  5 ปีที่แล้ว +4

      Check your Service Manual for how often. In the past every 10k miles. I love the Zerk fitting. You must use a high quality grease with a high melting heat threshold. Cause a poor quality grease will melt in 90 plus temperatures and dribble all over your bike. Pump in the grease till you see it coming out from under the dust shields. Wipe excess away.

    • @ericleger8158
      @ericleger8158 5 ปีที่แล้ว

      Actually, it's called a zerk fitting!@@LowCountryHarleyDavidson

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  5 ปีที่แล้ว +2

      Eric Leger thanks for catching the typo.

  • @CarlosOrtega-hn1qq
    @CarlosOrtega-hn1qq 4 ปีที่แล้ว

    DOC I THINK THIS IS A BUNCH OF HARLEY ENGINEERING BS THOSE RUBBER MOUNT ENGINES ALWAYS WOBBLES. THE ADJUSTMENT OF THE HEAD BEARINGS CHANGES WITH THE TEMPERATURE AND THE GREASE YOU ARE USING SO YOU HAVE TO RE-PACK THE BEARINGS EVERY TIME YOU DO YOUR 10K MILES SERVICE. AND I THINK THEY SHOULD PUT A DAMPER BOLT IN THE CENTER LIKE THE OLD PAN HEADS AND ADJUSTED ON THE ROAD.

  • @AJ-nh8ik
    @AJ-nh8ik 2 ปีที่แล้ว

    Not for nothing, but the "at home DIYer" is exactly that. They will do everything themselves. Saying take it to the dealer doesn't really help them, because they could've just taken it to the dealer from the start. On new bikes I can understand, let them deal with it cause it's probably still under some from of warranty anyway. But for the person with an older bike, the dealers act like they aren't trained or have the tools to work on it. This is the part I don't understand. It's the same bike minus all the fancy electronics.

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 ปีที่แล้ว

      A DIY owner should have a Factory Service Manual and the investment in tools if they choose not to use a Dealer Service Dept. My videos are not the How To Step by Step, I just want to explain what you can choose to do or not.....Doc

    • @AJ-nh8ik
      @AJ-nh8ik 2 ปีที่แล้ว

      @@LowCountryHarleyDavidson I appreciate that you took the time to make these videos and respond to the comments. I agree with you on that. If you are going to do your own work, the 1st tool you should have is a factory service manual. Then there are those times when either you don't have the time or don't want to be bothered by doing the work yourself. Only thing that rubbed me the wrong way was how it came off as if you were speaking to the DIYer and saying "if this is the case, take it to the dealership". I know that's not the case. This video was done a while ago, and it was being put out there for informational purposes. I was speaking from a place of emotion where myself, as well as a large amount of others, have been burnt by the dealerships for repairs that should have been done properly and was not.

  • @jerryking1434
    @jerryking1434 3 ปีที่แล้ว +1

    Thanks ...

  • @kylemoore9626
    @kylemoore9626 5 ปีที่แล้ว +9

    Doc Harley is the shiz 🤘🏻 love this channel. Im a pro diesel tech and I work on my own bikes so I love seeing these videos.

  • @WickedPinfish
    @WickedPinfish 5 ปีที่แล้ว +1

    Do a springer fall away video!!!!!!!!!!!!!!!!!!!!!!

    • @joeblo5516
      @joeblo5516 4 ปีที่แล้ว

      Chievres Nightrain
      Are they different?

  • @miketrevino8761
    @miketrevino8761 3 ปีที่แล้ว

    If anything is anything, put your motorcycle down and take it to your Harley Davidson dealer

  • @Bigrell0326
    @Bigrell0326 4 ปีที่แล้ว

    Bought a used bike, dislike front braking I WILL GET IT CHECKED!!!!

  • @ronaldpeterson1538
    @ronaldpeterson1538 4 ปีที่แล้ว

    Bullshit man....really?

  • @heathjude50
    @heathjude50 ปีที่แล้ว

    How could it be between the green and black when the black is where it wants to start swinging back? You go an inch passed that point and expect it not to swing back passed the swing back point? Seems like to me if it didn’t swing back to at least where this one does there’s something wrong.

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  ปีที่แล้ว +1

      Purchase a Factory Service Manual and we will discuss your theory 👍…. Doc

    • @heathjude50
      @heathjude50 ปีที่แล้ว

      @@LowCountryHarleyDavidson when I commented this I didn’t realize you were saying it should swing back to the opposite side marks. Makes complete sense now. I don’t need a service manual that’s what TH-cam is for lol.

  • @eddyguerra3120
    @eddyguerra3120 5 ปีที่แล้ว +1

    Excellent advice.....

  • @jackr.4119
    @jackr.4119 5 ปีที่แล้ว +1

    Thanks for the info...

  • @Evan-eq3uh
    @Evan-eq3uh 3 ปีที่แล้ว

    High Dollar. Not for me that’s why I ride a Honda.

  • @jamespolucha8790
    @jamespolucha8790 2 ปีที่แล้ว

    Harley mechanics are trained the Harley way, I went to there schools (classes) and they didn’t like the way I did certain things,

    • @LowCountryHarleyDavidson
      @LowCountryHarleyDavidson  2 ปีที่แล้ว

      Tarin I have met many techs. Each has their own way. The Harley Way is the best to begin with....Doc

    • @Wade6663
      @Wade6663 ปีที่แล้ว

      @@LowCountryHarleyDavidson CURIOUS WHEN YOU SAID THE TENSION WAS TOO TIGHT ON THAT BIKE DID YOU MEAN IT WAS TOO LOOSE, SINCE THE MARKS DID NOT FALL BETWEEN THE MARKS AND WAS ON INSIDE OF THEM SINCE BEING LOOSE CAUSES THE STEERING TO FALL FURTHER WHEN LOOSE. WHICH IN MY HEAD MAKES ME THINK IF ADJUSTMENT ADJUSTED TO TIGHTER IT WOULD HOLD BETWEEN THE MARKS AND NOT FALL INSIDE THE TWO OUTSIDE MARKS. MEANING IN THE END YOU HAD TO TIGHTEN THE NECK BEARING ADJUSTMENT UP TO KEEP BETWEEN THE MARKS??

  • @billgonzales8978
    @billgonzales8978 2 ปีที่แล้ว

    what a crock pf s??? its only a motorcycle for crying out loud, tell me how to do my 57 panhead?

  • @imadjubranimad3341
    @imadjubranimad3341 4 ปีที่แล้ว

    Don’t listen to him, do it yourself don’t go to the dealer it’s $800 job.

  • @jb-bu4vl
    @jb-bu4vl 2 ปีที่แล้ว

    And if the dealer refuses to work on an older bike?

  • @justinbaldwin1981
    @justinbaldwin1981 3 ปีที่แล้ว

    To bad harley took the grease fittings off the neck on the newer bikes