Nice job. Straight to the point with good commentary and accurate information. Seems like the mods you presented are nothing crazy but will still wake the bike up nicely. Going to be doing some of the same to my 300r because of what you presented here. Thanks for taking the time to make this video the way you did and not wasting mine by having to sit and watch you unbox, unwrap then install everything with cheap tools only to start the bike and twist the throttle wide open to the rev limiter thinking it’s so cool to do so. Good job, thank you. Much respect.
Love the bike, those bikes seem to be well built long lasting bikes, I'm sure time will tell. As far as the mods have you found it necessary to add a cooling fan to the radiator in tight single track riding. Also as for the snorkel removal be careful if you ride in wet conditions. The snorkel was removed in my son's Yamaha when he bought it, and we ran into water getting into the airbox in wet conditions. I ended up replacing it with a new factory part and we have experienced no more wet air filters. The marginal loss in power wasn't a big deal, I'd rather have the peace of mind in deep water crossing's. Love your bike, enjoy it and ride safe.
I don't have any water crossings I ride really , and no cooling fans , I've never overheated this bike even when in very tight singletrack , humid 80° +days just really have to keep moving .
A Zeta Racing mount kit and disc guard for a same year KLX250 will fit this machine. Topar Racing has a really nice aluminum unit but are hard to get an order through with these days. I have the same year model and love mine too! It reminds me of an 82 XR500 with better manners and brakes. I got rid of the boat anchor and mounted the same T6. I get complaints from guys riding close in behind me that a lot of the exhaust pulses are smacking them in the face.
Do you have any exhaust leaking out of the header to muffler connection with the slip on? Does the slip on give you trouble getting it into position? Last thing I have heard of people saying that there will be backfire on the deceleration have you notice that?
No leaks , no problems getting it installed , and there are some backfires on deceleration , I honestly don't care about that , nor do I know how to fix it , the problem definitely lies with the PC slip on , maybe once I get an fmf powerbomb header it helps clear that up .
@@Synthsnstuff84 Yes thank you I am doing some reading on the deceleration popping. I was curious because I happened to get a full PC exhaust and had a bit of trouble with alignment though that could be normal. I have a leak at the location I was asking about because I am using the muffler as a slip on, though there is a difference between the slip on muffler from PC and their full system muffler did not know this at the time of ordering. I am thinking of placing the header on it and seeing what that will do. Also I noticed your tag where about in MI do you ride if you don’t mind me asking?
@@Synthsnstuff84 that's awesome man, I ride those spots as well, also live Denton creek, and meadows single track by Luzerne. Been riding an AT on them, but thinking about grabbing one of these bikes this year! Glad to hear it does well here in MI
Nice! On my 2021I put the full T-6 exhaust on and I'm also using the FMF slip on tune in my power commander. The T-6 header is about 2mm larger in diameter in case your wondering. I'm still running the stock air box snorkel and waiting for a full exhaust tune from dyno jet to come out. Did removing the air box snorkel help at all? Thanks
How hard is it to add a headlight and taillight to this bike. That would be my last concern before thinking of buying. I heard the connectors are there from the factory and it’s simple plug and play minus maybe a brake switch for rear brake to make it street legal (what Kawi should have done instead of the heavy ass klx300)? Thanks for the videos!
If you want this bike street legal , just buy the 2021 dual sport model , otherwise I'm sure it can be done with some effort , and yes the accessory plug is there for the front harness , although I didn't use it , and the rear brake reservoir/piston does not have an extra port for the switch some dirt bikes do this does not .
@@Synthsnstuff84 KLX300 claims to be like 20 pounds heavier than the 300R. I'm sure some of that is in the pipe, but I couldn't imagine all of it is. Do you know any 300 owners that have weighed the stock DOT pipe?
Thanks for the video. Wanting to make my 2021 KLX 300r street legal. Do you know if they sell the wiring harness for the headlight and turn signal? And help would be awesome
So my 19yo son bought me a 2022 today. :D He just started riding bikes like 4 months ago. (I wanted to get him bikes, but my monster in law shit on that... (God rest her miserable soul) anyways I was fine until I got on his new yz250 he got 3 days ago, and I got bit again. He saw me window shopping these and legit made up some BS to get me to the dealer and homie bought it. Sorry, had to share, I'm stoked. .... and old AF..... this is probably some way to get me to kill myself so he can have all my shit.... bastard.
Hey man, i have the 97 klx300r. I’m looking at suspension upgrades.. any idea on what I should get? Something that’s just a bolt in upgrade.. some people said the kx250 rear shock will work but i’m not sure
Did the slip on or the power commander cool down the header? Because another owner told me if I replace the stock muffler it’ll keep the pipe from getting so hot. Been waiting months for another slip on to get in stock debating on just getting the power commander
Dude I would love to be able to mod my bike! I would do every thing you've done except I would add a tooth the the rear sprocket. How much where the mods if you don't mind me asking???
Did you remove the black emissions box in the back or did you not get the California model because I’m trying to remove it because I think it looks stupid if you did I’d love to see how you did it
I bought one today. I would like you to tell me how to do everything, where you got it and how much as i cant be bothered to look for myself on Google. Please do everything for me.... :) WTF is it with people on here.
Nice job. Straight to the point with good commentary and accurate information. Seems like the mods you presented are nothing crazy but will still wake the bike up nicely. Going to be doing some of the same to my 300r because of what you presented here. Thanks for taking the time to make this video the way you did and not wasting mine by having to sit and watch you unbox, unwrap then install everything with cheap tools only to start the bike and twist the throttle wide open to the rev limiter thinking it’s so cool to do so. Good job, thank you. Much respect.
Just a FYI, do a pair valve block, cap 2 ends and the backfire disappears. Huge difference and no issues what so ever.
That's what I did .
what is that?
Love the bike, those bikes seem to be well built long lasting bikes, I'm sure time will tell. As far as the mods have you found it necessary to add a cooling fan to the radiator in tight single track riding. Also as for the snorkel removal be careful if you ride in wet conditions. The snorkel was removed in my son's Yamaha when he bought it, and we ran into water getting into the airbox in wet conditions. I ended up replacing it with a new factory part and we have experienced no more wet air filters. The marginal loss in power wasn't a big deal, I'd rather have the peace of mind in deep water crossing's. Love your bike, enjoy it and ride safe.
I don't have any water crossings I ride really , and no cooling fans , I've never overheated this bike even when in very tight singletrack , humid 80° +days just really have to keep moving .
Great bike…solid mods!
A Zeta Racing mount kit and disc guard for a same year KLX250 will fit this machine. Topar Racing has a really nice aluminum unit but are hard to get an order through with these days. I have the same year model and love mine too! It reminds me of an 82 XR500 with better manners and brakes. I got rid of the boat anchor and mounted the same T6. I get complaints from guys riding close in behind me that a lot of the exhaust pulses are smacking them in the face.
Thanks for the video buddy I'm thinking about buying one of them bikes
Great trail bike !
Can you post the link for that headlight? I have the same bike and looking for one🤞
Good video
Honestly I'm staying off the road I mite see it ur guys way
Awesome work bro !!!
Must be a tough set of piston and rings for them to be okay if the pipe glowed...I did it 2 or three times on my Honda and had to replace the rings...
Bikes a tank
Did the bike have no headlight originally? Is there a connector for a headlight from factory? thx
Do you have any exhaust leaking out of the header to muffler connection with the slip on? Does the slip on give you trouble getting it into position? Last thing I have heard of people saying that there will be backfire on the deceleration have you notice that?
No leaks , no problems getting it installed , and there are some backfires on deceleration , I honestly don't care about that , nor do I know how to fix it , the problem definitely lies with the PC slip on , maybe once I get an fmf powerbomb header it helps clear that up .
@@Synthsnstuff84 Yes thank you I am doing some reading on the deceleration popping. I was curious because I happened to get a full PC exhaust and had a bit of trouble with alignment though that could be normal. I have a leak at the location I was asking about because I am using the muffler as a slip on, though there is a difference between the slip on muffler from PC and their full system muffler did not know this at the time of ordering. I am thinking of placing the header on it and seeing what that will do. Also I noticed your tag where about in MI do you ride if you don’t mind me asking?
All over , mayfield , mis kal , leota , leetsville , kalkaska m-72 , caber fae .
@@Synthsnstuff84 that's awesome man, I ride those spots as well, also live Denton creek, and meadows single track by Luzerne. Been riding an AT on them, but thinking about grabbing one of these bikes this year! Glad to hear it does well here in MI
Nice! On my 2021I put the full T-6 exhaust on and I'm also using the FMF slip on tune in my power commander. The T-6 header is about 2mm larger in diameter in case your wondering. I'm still running the stock air box snorkel and waiting for a full exhaust tune from dyno jet to come out. Did removing the air box snorkel help at all? Thanks
More air is better , 4 stroke is basically a big air compressor , more in more out .
Hey @NorMichtrailrider. Could you drop the links for the stuff you bought? I just got this same bike, love it already!
Look in the comments
How hard is it to add a headlight and taillight to this bike. That would be my last concern before thinking of buying. I heard the connectors are there from the factory and it’s simple plug and play minus maybe a brake switch for rear brake to make it street legal (what Kawi should have done instead of the heavy ass klx300)? Thanks for the videos!
If you want this bike street legal , just buy the 2021 dual sport model , otherwise I'm sure it can be done with some effort , and yes the accessory plug is there for the front harness , although I didn't use it , and the rear brake reservoir/piston does not have an extra port for the switch some dirt bikes do this does not .
@@Synthsnstuff84 KLX300 claims to be like 20 pounds heavier than the 300R. I'm sure some of that is in the pipe, but I couldn't imagine all of it is. Do you know any 300 owners that have weighed the stock DOT pipe?
th-cam.com/video/KCRIR6EDTfw/w-d-xo.html
Thanks for the video. Wanting to make my 2021 KLX 300r street legal. Do you know if they sell the wiring harness for the headlight and turn signal? And help would be awesome
Read your manual ! I'm sure there's options out there ! I know the 20' klx-300r has an accessory tap for a headlight .
So my 19yo son bought me a 2022 today. :D
He just started riding bikes like 4 months ago. (I wanted to get him bikes, but my monster in law shit on that... (God rest her miserable soul) anyways I was fine until I got on his new yz250 he got 3 days ago, and I got bit again. He saw me window shopping these and legit made up some BS to get me to the dealer and homie bought it.
Sorry, had to share, I'm stoked.
.... and old AF..... this is probably some way to get me to kill myself so he can have all my shit.... bastard.
Plus I want to put a headlight on the one I get to
I ended up taking it off , do your thang .
Hey man, i have the 97 klx300r. I’m looking at suspension upgrades.. any idea on what I should get? Something that’s just a bolt in upgrade.. some people said the kx250 rear shock will work but i’m not sure
Go to a forum online I'm useless.
Did the slip on or the power commander cool down the header? Because another owner told me if I replace the stock muffler it’ll keep the pipe from getting so hot. Been waiting months for another slip on to get in stock debating on just getting the power commander
Twas thy commander of power .
with the dyne jet, do you just download the tune from the website?
Yes
Dude I would love to be able to mod my bike! I would do every thing you've done except I would add a tooth the the rear sprocket. How much where the mods if you don't mind me asking???
Pipe - $359 bars-$80 pegs-$100 front sprocket -$50 headlight - $80 power commander -$389 chain-$35 front pirelli -$100
@@Synthsnstuff84 Thanks for the info!!!
No problem !
@@Synthsnstuff84 where did you find a power commander for 80???
nevermind i misread
I want to get a tuner before any other mod. Or is it ok to try and open the air intake first??? What about taking the o2 sensor off?
I don't know anything about that , get a pipe or header first !
Did you remove the black emissions box in the back or did you not get the California model because I’m trying to remove it because I think it looks stupid if you did I’d love to see how you did it
I'm in Michigan no emissions . There's videos out there on how to do it
@@Synthsnstuff84 I figured it out by trial and error but thanks anyways
@@tooteef6033 any suggestions or link to a video would help me! Having a hard time finding instructions
@@MadeJustForYou07 should I make one?
@@tooteef6033 bro yeeeesssssss 😂
Is there a trick to pulling the ecm wire out?
The trick is , take your time it has clips , it's made not to come apart .
But I will die a happy man
When you put those pegs on did you have to adjust the shifter due to them being wider?
Nope
Please help!!wanna order a exhaust for my 300sm do u know if your exhaust will fit
Where does the tuner plug into?
Ecu under seat
You know if the T6 is louder than the fmf Q4?
I do not , this pipe is loud tho .
What rental bars are those ?
How often do you do oil change?
Every 5 or 6 hours complete overkill but it's a single cylinder high revving motor so it doesn't bother me .
Where I can get the exhaust? Easy to install?
Pro circuit .com and good luck
Aye buddy how hard was it to set up the power commander and how?
Download a tune to it make sure it sticks , and hook it up to your bike , if you buy one it comes with the how to's very simple .
@@Synthsnstuff84 How do you download the tune to the module? Do you connect it to your computer?
Read the included instructions
What’s the headlight bud?
Polisport bought on Amazon .
What is the name of your bike lift?
No lift
I bought one today. I would like you to tell me how to do everything, where you got it and how much as i cant be bothered to look for myself on Google. Please do everything for me.... :) WTF is it with people on here.
I'm not doing anything for you ! Cheers on the bike .
What brand off headlight is it?
Polisport 8663500001 Headlights www.amazon.com/dp/B00F3QP0WE?ref=ppx_pop_mob_ap_share
Where can I get that head light?
Amazon -Polisport 8663500001 Headlights www.amazon.com/dp/B00F3QP0WE?ref=ppx_pop_mob_ap_share
Will that headlight fit on a klx 230?
?
Save your money forgot the header
What should I be careful about if I remove that air duct? Are there any risks?
Life is a risk , experiment with it .
@@Synthsnstuff84 no thanks
Can’t afford to fix it lol
Do you know the model number of foot pegs you have? I have a KLX300R 2022, I need pegs bad.
Can't recall I ordered them from IMS , just check their website and put in your bike model and year
What is name of your headlight kit?
Not a real kit , polisport on Amazon was cheap and not very bright .