i love how you fixed those problems as an electric engineer. why waste money and time replacing a cable when you can do what you did. Absolute Rock Star.
Hello Sorin and everyone. Happy new year!!!! 🎉🎉🎉 These Clevo machines are amazing. I'm on my 3rd one (from Sager, since Clevo is a white label brand). The one before the current one was badly damaged by a technician a few years ago. That job is what got me into repairing electronics. I did the repair by drilling into the shorted part of the motherboard until I removed the short. That laptop is still working in my shop 🙂
I wouldn't say anything good about these laptops taking to the account the fact that they are sending power and the ground to the screen through the same wire like in a TV antenna wire, with only difference in the case of the laptop such a wire is extremely small. To say that is a bad design is nothing to say...
Welcome back Sorin. hope that you and your family had a very Happy Christmas and I wish you and your family a very Happy New Year. I missed your videos.
Always use calibrated fingers to insert connectors, or the pins will get mashed together as they did here. Good job on undoing the mess that was the result.
i think it will not last long, because all the load is on 3rd wire now. because 1 point in screen side connector is broken and there is no pad you can see at 9:14 and you cut the 2nd wire at 18:51 so all the load will be transferred to the 3rd wire, and there too many chances that it will be heated and melted as well. Correct me if i am wrong 😊
Only replace the ribbon cable will be my approach, but this is delivery and so on. The rest will be as your steps. Just to be shure in the ribbon. Thank you for your videos. Keep spreading your knowledge in 2025.
hello sir I am from Algeria, graduated of electronic embedded systems, and I am fond of electronics. I want to master electronic maintenance.... What do you recommend?
22:23 I would've chosen to mode the problematic earth cable to the other side, where the second cable is soldered on. Just so it doesn't cross the uninsulated power cables. If I were too lazy to do even that, I would've cut the crossing earth cable and fold it back. Then put tape around it. Lots of more reliable, lazy options.
Happy new year my dearest teacher!! I hope 2025 is a great year for you with many pizzas and loooots of "we have picture, I can't believe!" Thanks for your work and teachings!
These Clevo board never break - unless someone break them. I work in Avell, something like Mechrevo and XMG that you may know. At each hundred tongfang board issues, we did get one Clevo board with problem. Note that tongfang boards is under 5 percent RMA rate.
Happy new 2025 year to you and the family, you have a great show 👍been a long time Romanian watcher from 🇦🇺 keep the good work up and show people how electronics use to be fixed in Romania under the communists🤣
I dlatego bezpieczników sie nie drutuje. Tu nasz przykład co sie stanie jak uzyjesz pr,eeodu zamiast bezpiecznika. Zamieni się w kulkę i wypali dziure w płycie.
well so far good on Janurary 20th america will be not so good and no im no lefty however i drank a little to much on the 1st so ill watch this and probably go back to sleep
only sorin can tell you that a proper fuse is better than a wire then 2 seconds later puts a proper calibrated wire lol, happy new year!
@@techprotips5865 😅 this is Sorin 💙
Lol, that was a classic one!!
i love how you fixed those problems as an electric engineer. why waste money and time replacing a cable when you can do what you did. Absolute Rock Star.
good luck finding a cable for this crappy brand.....owned one 2 yers ago...even finding a battery is a challenge
Hello Sorin and everyone. Happy new year!!!! 🎉🎉🎉
These Clevo machines are amazing. I'm on my 3rd one (from Sager, since Clevo is a white label brand). The one before the current one was badly damaged by a technician a few years ago. That job is what got me into repairing electronics. I did the repair by drilling into the shorted part of the motherboard until I removed the short. That laptop is still working in my shop 🙂
I wouldn't say anything good about these laptops taking to the account the fact that they are sending power and the ground to the screen through the same wire like in a TV antenna wire, with only difference in the case of the laptop such a wire is extremely small. To say that is a bad design is nothing to say...
Happy New Year Sorin and to your whole family! I was starting to get bored there !! 💗
Welcome back Sorin. hope that you and your family had a very Happy Christmas and I wish you and your family a very Happy New Year. I missed your videos.
La multi ani! Un an nou fericit
Proper calibrated teacher thank you and happy new year sorin
Happy New Year Sorin and Everyone followers this channel!
Nice explained Good job!
👍
Happy New Year Sorin, Ihope you had a great time.
Happy New Year to you and your family. I am happy to can see your videos again this new year.
Always use calibrated fingers to insert connectors, or the pins will get mashed together as they did here.
Good job on undoing the mess that was the result.
we have picture and its working, i cant believe !! happy new year @everyone
i think it will not last long, because all the load is on 3rd wire now. because 1 point in screen side connector is broken and there is no pad you can see at 9:14 and you cut the 2nd wire at 18:51 so all the load will be transferred to the 3rd wire, and there too many chances that it will be heated and melted as well. Correct me if i am wrong 😊
he's giving a warranty, just wait if the laptop is coming back or not
Sorin, Have a Happy and Healthy New Year!
It's working!!! Happy new year Sorin, keep up the good work!
Happy new year Sorin to you and your family!
Happy new year Sorin ! Greetings from Belgium 🎉
Happy new yesr Sorin, thank you so much for this sharing videos on TH-cam ..
Happy New Year!!! La Multi Ani!!! Thank you Sorin for all your video!!!
Only proper calibrated wires are used to complete the job, I like this 😂 have a bountiful year ahead!
Welcome back Sorin. Thanks for sharing
Happy New Year and best wishes to you and your family, with proper calibrated wires and lots of dead caps and pizza times!!!
Very good, ART OF IMPERFECTION !
Excellent video Sorin. Happy New Year.
Happy New Calibrated Year to You, Sorin!!!!
Me to Sorin its just another day i dont get excited with a new year good job as usal
Yes, Better safe than sorry, Everyone happy, Not overcomplicated or expensive overkill, Nice work!
Happy New Year Sorin!
Happy new year.. my fav teacher..
Happy New Year!! Best wishes to you and your family
Respect for Sorin...
happy new year sorin.
happy new year to you and your family
Happy New Year Master Sorin.
Happy New Year Master Sorin!
Proper proper proper nice repair, what a start for the 2025!!!!👏🏻👏🏻👏🏻
Thank you very much sir you're the best. May good bless and straighten you. Please for keep your good work
Happy new year Sorin
Only replace the ribbon cable will be my approach, but this is delivery and so on. The rest will be as your steps. Just to be shure in the ribbon. Thank you for your videos. Keep spreading your knowledge in 2025.
Happy new year Sorin!
hello sir
I am from Algeria, graduated of electronic embedded systems, and I am fond of electronics.
I want to master electronic maintenance.... What do you recommend?
Happy Nwe Year to you and your family
Good Job. Happy new year.
proper dodgy repair :D Happy new year
nice. Happy New year to you
Happy new year sorinn❤❤❤❤🎉🎉🎉
Good job mate 👏
Happy new year
Feliz año 2025 para todos, por otro lado se aprende mucho de este canal.
If I understand correctly, the plus and the ground to the screen are through the same cable (shielded) like in a TV antenna wire?
22:23 I would've chosen to mode the problematic earth cable to the other side, where the second cable is soldered on. Just so it doesn't cross the uninsulated power cables.
If I were too lazy to do even that, I would've cut the crossing earth cable and fold it back. Then put tape around it.
Lots of more reliable, lazy options.
Happy new year.
Bonne et heureuse année 🎉🎉🎉
Nice job bro❤
Nice jop and nice say its working we have a picture
Happy new year!
Hi friend happy new year 🎉🎉🎉🎉🎉
Power button this laptop have 18 volts
happy new year...
Could it be due to a shock that move the connector and shorted those pins ?
Love it! Good stuff.
perfect 💯💯👌
Happy new year my dearest teacher!! I hope 2025 is a great year for you with many pizzas and loooots of "we have picture, I can't believe!"
Thanks for your work and teachings!
"We have picture that's crazy!" 😂
At the end of video, you charge the laptop with 21 V. Is it save?
Happy new year everyone 🎉❤
These Clevo board never break - unless someone break them.
I work in Avell, something like Mechrevo and XMG that you may know. At each hundred tongfang board issues, we did get one Clevo board with problem. Note that tongfang boards is under 5 percent RMA rate.
Nice! 😎
Thankssssssss❤
New year new calibrated wires ! 🎉
8:40 what are you referring by this "i know" ?
Should be test in the cable screen not in the connecteur 😂😢
@youneslafri9120 ok understand :)
"how that happened?" my guess is, someone watched your videos and decided to also use a "proper calibrated wire", instead of the proper fuse.
That's why I call you Mcgyver. Great content. Thanks
looks to me the solder ball shorted the grounded heat sink to a power pad on the board and shorted causing all the damedge
1:33 - I've just noticed that cable at 10 o'clock - is that a bare wire?
Happy new year 🎊 and more work to do 😂
Happy new 2025 year to you and the family, you have a great show 👍been a long time Romanian watcher from 🇦🇺 keep the good work up and show people how electronics use to be fixed in Romania under the communists🤣
sorin saying proper nice sexy fuse was not on my bucket list for 2025
Fixed one with a proper calibrated wire
Happy NY
Sorin!!!!!....bended...bent you mean😂😂.
I know it's all about low costs, but a screen ribbon cable is not that expensive, maybe could be offered to the client.
La mulți ani!
I dlatego bezpieczników sie nie drutuje. Tu nasz przykład co sie stanie jak uzyjesz pr,eeodu zamiast bezpiecznika. Zamieni się w kulkę i wypali dziure w płycie.
sorin thankGOD there is only 8 comments love ur contant Unconditinal LOVE FROM KARACHI PAKISTAN
2025 the year of easy Pizza 🙂 ( Hopefully )
Hello 🤝👍👍👍👍👏👏👏👏👋👋👋👋👋
Proper SORIN style job.. ha ha haaaaa...😊
what i like about u? for every dodgy repair u have an explanation.hhh
Szczęśliwego nowego roku 2025 🎉
I think Sorin needs to replace his power supply for a better one that can give at least 10 amps. Nice video anyways
🍕🍕🍕🍕🍕🍕 Happy new year s
It´s not dodgy, it´s proper calibrated for the case at hand.
More grey hair ? Happy 2025 Sorin !
I would guess the user replaced the screen without disconnecting the battery first, blew the fuse, soldered across it...
and didn't connect the cable at the screen side properly :D
For the same user to be knowledgeable enough to find and bridge the fuse, but being unable to push in a connector properly, that doesn't make sense.
well so far good on Janurary 20th america will be not so good and no im no lefty however i drank a little to much on the 1st so ill watch this and probably go back to sleep
Un an Nou Fericit!
👍👍👍💻
2025 started with dodgy repair🎉
The proper calibrated pizza, lol, the wire was too thick.
Happy New Year 2025