Thank you! Those tractors are undestructable and good to work with. Problem with that one is previois owner, he didnt maintain it well and there was some things to reppair. I got it prety cheap so i bought it 8 months ago because i neded one biger tractor quick because of wind that caused alot of work in forests. The only problem i stil have is cold weather, when temperature hoes to - it doesnt start well. We ll try to put new torch inside with biger capacity of flame and we ll se if it will make any diference. Thanks for watching!😊
Do you keep thermostart torch in warming position long time enough? It take about 30sec to 1 minute to heat and get flame there. If it is silence where you use that you can hear when the flame ignites in inlet manifold. Only after that there is any help for starting. And then it will help.
@@agfunk1124 yes ofcourse i tried that aswel. First we put in new original torch for sisu but it was the same problem no changes. I olways heat it for a minute and i tried even more. I just changed now the torch and this new one makes 2 times biger flame and in 10 second. At 0° it started very well for now i hope it will start as good when temperatures goes below 0.
@@forstfarming3877 Ok, just checking because i have also seen when someone use thermostart like 10 second and then say that it won't make any good. But that is annoying if it wont start anyway. I know that those with stanadyne rotary injection pumps aren't as good as older with inline pump or even as good as newer commonrails to start, but that really sound that it starts badly. We did have 8450 in work and it also were misfire rumbling and smoking white like under +0 but it still starts quite easily. Do you have had opportunity to check injectors and pump and such things like timing?
3:20 - Damn, this beats porn every day of the week! You sure know how to operate that saw! I thought it looked a bit weird at first, until I realised you have complete control every step of the way. Nice logging there, Sir! My compliments! Also, @ 7:22 - that is some serious pulling power. Is this only two driven wheels on the wagon?
@@forstfarming3877 Nice, that tractor should not be heavy enough to pull like that, I think, but I guess somebody else stretched the wagon and they can call me a dumbass. I know how slopes look like on cam, so this muddy track was a real test. Thank you!
![เจ้าผู้เดียว - ดิด คิตตี้ [OFFICIAL MV]](http://i.ytimg.com/vi/q0NLCYKBOTo/mqdefault.jpg)
Love your old Valmet, such a tough workhorse!
I kid you not, I could watch this all day. Valtra is a good bit of kit, be good to see more. Subbed👍🚜
Thank you very much! :)
📽️ Very good video 📽️ Interesting camera angles. 🚜 Strong tractor 🚜 Muddy conditions
Very good video😀👍
Valtra beste❤
Great 👍💪👌
Nice video👍
Zelo dober video. Kar tako naprej
Schön
Kolk konjev pa ima ta tractor? Je prikolica z pogonom? Kolk mesčno posekata?
Nice vid. How you rate the valmet 8000 series? Had any problems at all?
Thank you! Those tractors are undestructable and good to work with. Problem with that one is previois owner, he didnt maintain it well and there was some things to reppair. I got it prety cheap so i bought it 8 months ago because i neded one biger tractor quick because of wind that caused alot of work in forests. The only problem i stil have is cold weather, when temperature hoes to - it doesnt start well. We ll try to put new torch inside with biger capacity of flame and we ll se if it will make any diference. Thanks for watching!😊
You're back! Yay
Do you keep thermostart torch in warming position long time enough? It take about 30sec to 1 minute to heat and get flame there. If it is silence where you use that you can hear when the flame ignites in inlet manifold. Only after that there is any help for starting. And then it will help.
@@agfunk1124 yes ofcourse i tried that aswel. First we put in new original torch for sisu but it was the same problem no changes. I olways heat it for a minute and i tried even more. I just changed now the torch and this new one makes 2 times biger flame and in 10 second. At 0° it started very well for now i hope it will start as good when temperatures goes below 0.
@@forstfarming3877 Ok, just checking because i have also seen when someone use thermostart like 10 second and then say that it won't make any good.
But that is annoying if it wont start anyway.
I know that those with stanadyne rotary injection pumps aren't as good as older with inline pump or even as good as newer commonrails to start, but that really sound that it starts badly. We did have 8450 in work and it also were misfire rumbling and smoking white like under +0 but it still starts quite easily. Do you have had opportunity to check injectors and pump and such things like timing?
Koncno video😂👍
Kdor čaka dočaka😂
@@forstfarming3877 haahaahah
When you say torch, are you talking about the glow plug?
Maybe yes the thing that makes flame to heat the fuel.
@@forstfarming3877 Thank you!
such a large technique should be prohibited in the forest
3:20 - Damn, this beats porn every day of the week! You sure know how to operate that saw! I thought it looked a bit weird at first, until I realised you have complete control every step of the way. Nice logging there, Sir! My compliments!
Also, @ 7:22 - that is some serious pulling power. Is this only two driven wheels on the wagon?
thank you, yes its 2 se on back tires :)
@@forstfarming3877 Nice, that tractor should not be heavy enough to pull like that, I think, but I guess somebody else stretched the wagon and they can call me a dumbass. I know how slopes look like on cam, so this muddy track was a real test. Thank you!
Zka pa nimas zascite na krdanu
Zdej jo ze mam.
@@forstfarming3877 hvalabogu