If you've seen the first one... here's episode 2! These are a few reasons why you tank could be leaking! Remember to like, comment, share, subscribe and TURN ON THOSE POST NOTIFICATIONS!
Should add that airflow/juice control need to be closed when you open and fill a top fill tank, I've seen a hell of a lot of people that complain about leaking just open the tank up breaking the vacuum.
Love the Wal-Mart Bike analogy. I spend weeks after Christmas until early spring with a line of kids in front of my garage and every one of them are saying "Can You Fix my Bike?". Every one of the bikes came from Wal-Mart and every one of them are improperly assembled, improperly or totally not lubed and improperly adjusted. I imagine that hand assembled tanks are pretty much the same if the assembler doesn't take pride in his/her work. Thanks for the info. My leak was from using too low of wattage.
I'd say that the two issues are related if Walmart bikes are made in China. They can make anything. The quality all depends on how much they are allowed to get away with. I own SMOK products which all leak and most vaporizers are made by the same company the makes SMOK.
When filling the tank if you dont get e juice inside the hole chances are the juice could flow out the air holes a nice trick to use lightly blow into to tank where the juice comes out the holes and wipe it
Any tips for preventing leaking on a bottom airflow tank? I have a Smok Spirals which keeps leaking into my mod and coming out of the battery vents on the bottom of the mod.
Vaping Smurf look at coil. Make sure the rubber seal notches are matching up. If the wires are lifting the rubber seal too much you can use mini wire clippers to clip those wires down. ( sometimes wires will lift it enough where it’s not sealing so you’ll get leaking from the bottom.)If you do that put the “vape juice saturated coil” on tank bottom and screw it into mod. Testing the coil first before wasting any more juice. Don’t press button long. You don’t want to burn the coil. If mod doesn’t say low atomizer, if you see any steam or hear the crackling then assembling the tank, filling with juice just a bit. If it’s still not leaking after awhile then you’re good to go. You may have a bad coil as well. I’ve had to throw out many boxes of coils. Hope this helps😊
Don't forget crazy girlfriends who soon become ex's, that seem to jealously state: "your mouth spends more time on that vape than on me..." So with a jealous GF and in combo with smart ass return remarks, you'll find your vape seemingly flying like Elon Musk's Falcon rockets and on its return landing to earth you find that... yep like Apollo 13, Houston we have a leak. -Deuces
Very Informative and nicely relayed, You Rock Man!
Should add that airflow/juice control need to be closed when you open and fill a top fill tank, I've seen a hell of a lot of people that complain about leaking just open the tank up breaking the vacuum.
Love the Wal-Mart Bike analogy. I spend weeks after Christmas until early spring with a line of kids in front of my garage and every one of them are saying "Can You Fix my Bike?". Every one of the bikes came from Wal-Mart and every one of them are improperly assembled, improperly or totally not lubed and improperly adjusted. I imagine that hand assembled tanks are pretty much the same if the assembler doesn't take pride in his/her work. Thanks for the info. My leak was from using too low of wattage.
I'd say that the two issues are related if Walmart bikes are made in China. They can make anything. The quality all depends on how much they are allowed to get away with. I own SMOK products which all leak and most vaporizers are made by the same company the makes SMOK.
Thanks for the great advise. Mine leaks only when I fill it up and stops once there is negative pressure and never at any other time
When filling the tank if you dont get e juice inside the hole chances are the juice could flow out the air holes a nice trick to use lightly blow into to tank where the juice comes out the holes and wipe it
Now... How to FIX a leaking tank... This was very informative but I wanna know how to stop a leaky tank...
How do you clean your vape/mod after it leaks?
I cracked the glass on my TFV Prince tank. Now I'm using the rba coil like a driper. It works ok just have to keep the cotton juiced
Any tips for preventing leaking on a bottom airflow tank? I have a Smok Spirals which keeps leaking into my mod and coming out of the battery vents on the bottom of the mod.
Vaping Smurf look at coil. Make sure the rubber seal notches are matching up. If the wires are lifting the rubber seal too much you can use mini wire clippers to clip those wires down. ( sometimes wires will lift it enough where it’s not sealing so you’ll get leaking from the bottom.)If you do that put the “vape juice saturated coil” on tank bottom and screw it into mod. Testing the coil first before wasting any more juice. Don’t press button long. You don’t want to burn the coil. If mod doesn’t say low atomizer, if you see any steam or hear the crackling then assembling the tank, filling with juice just a bit. If it’s still not leaking after awhile then you’re good to go. You may have a bad coil as well.
I’ve had to throw out many boxes of coils.
Hope this helps😊
Thank you so much couldn't have said anything else 🙏😎
Don't forget crazy girlfriends who soon become ex's, that seem to jealously state: "your mouth spends more time on that vape than on me..." So with a jealous GF and in combo with smart ass return remarks, you'll find your vape seemingly flying like Elon Musk's Falcon rockets and on its return landing to earth you find that... yep like Apollo 13, Houston we have a leak.
-Deuces
Well I am not the agent hero 45 And it lakes