Not to criticize, but to offer some other ideas. If you want to make the thread accurate to a standard, say ISO or UN, make a triangle and then a line connecting the midpoints of the two sides that are not parallel to the axis. This line will become the pitch diameter. Dimension the line that is parallel to the axis to the pitch of the thread. Now dimension the pitch diameter to your standard. Position the triangle such that when driven by the helix, it will cut where you need it to. Exit this sketch. Make a new sketch where you convert the two sides of your original triangle to lines in the second sketch. Put your nose radius here. Now make a line parallel to the axis, but short of the same line is the first sketch. Trim the corners. This way is a bit more work, but it makes the thread exactly to your standard. Trimming the parallel line short of the first triangle prevents SW from failing to drive on the helix. It helps to hide the first sketch before driving the helix, making it easier to choose the correct sketch to drive. Once the thread is cut, go to the end of the thread. Click on the small surface that is parallel to the axis, click to make a sketch on that surface. While the surface is still highlighted, click on “Convert Entities” to form an outline. Project this as an extruded cut out the side of the thread. You no longer have an abrupt end to the thread, but an smooth exit.
@@svrt5832 I seldom use the hole wizard. Does it do tapered threads? Does it do external threads? I suppose it matters what one is modeling, and just how accurate the threads must be. I have modeled quite a few API threads, (both pin and box) where the pitch diameter of the thread is specified at a given distance from the shoulder. The thread form is also specified. Never could get the hole wizard to do those threads. If you know, please let us know how. Thanks.
Such a great teaching. I am from Ahmedabad, India. However you have to explain more that why you selecting a particular tool or taking a particulare step.
I watched the video. There is 1 problem when you dimension the wireframe. It seem to me you dimension the "radius" not "diameter". To correct that when you pick, you pick the center line first then pick the line and drag dimension below the CENTER LINE then it give you a "diameter" dimension instead of "radius". Second problem you don't need to create 2 curves (for diamond knurl) just create 1 curve then mirror that curve then do pattern. Try that, let's see it works.
My friend when I finish a part I m going to the library to put a color on it. For ex. I put nickel or something which it must shine but it doesn't shine at all. What I must do? Thanks
Dear sir,how to find out /calculate the weight of any metal rod /sheet etc. in Solid works;also how to confirm density of the material or is correct.please guide.
I learned solidworks in two weeks. Thanks to you. I already feel like a master.
I remember from my Msc in design and manufacturing how smart were Indian engineers. Greetings from Greece
Thanks from the Netherlands, your tutorials really help me out!
Thanks for watching i hope you enjoyed.
Thank you, sir, for the brilliant tutorials! The knurling effect you produced here was genius!
THANK YOU FOR YOUR HELP , NOW I CAN FINISH MY HOME WORK.
Thank you from Las Vegas!!! I'm learning a lot from your tutorials.
thanks,
I want to teach beval gear sketch and enimation
At last; someone who speaks to what they are doing. Well done matey.
Thanks from French , I am new on Solidworks but your tutorials very help me
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Excellent 👍 Thank you.
Thank you, from Brazil!
its my pleasure Sir.
Thank You from Việt Nam. You are a great teacher. I have improved my skill a lot from your tutorials.
thanks sir from india your tutorial is best for beginners
Good very helpfull videos you have creat
Not to criticize, but to offer some other ideas. If you want to make the thread accurate to a standard, say ISO or UN, make a triangle and then a line connecting the midpoints of the two sides that are not parallel to the axis. This line will become the pitch diameter. Dimension the line that is parallel to the axis to the pitch of the thread. Now dimension the pitch diameter to your standard. Position the triangle such that when driven by the helix, it will cut where you need it to. Exit this sketch. Make a new sketch where you convert the two sides of your original triangle to lines in the second sketch. Put your nose radius here. Now make a line parallel to the axis, but short of the same line is the first sketch. Trim the corners. This way is a bit more work, but it makes the thread exactly to your standard. Trimming the parallel line short of the first triangle prevents SW from failing to drive on the helix. It helps to hide the first sketch before driving the helix, making it easier to choose the correct sketch to drive. Once the thread is cut, go to the end of the thread. Click on the small surface that is parallel to the axis, click to make a sketch on that surface. While the surface is still highlighted, click on “Convert Entities” to form an outline. Project this as an extruded cut out the side of the thread. You no longer have an abrupt end to the thread, but an smooth exit.
We can also just use proper standards by taking industry standard threads that exist below hole wizard
@@svrt5832 I seldom use the hole wizard. Does it do tapered threads? Does it do external threads? I suppose it matters what one is modeling, and just how accurate the threads must be. I have modeled quite a few API threads, (both pin and box) where the pitch diameter of the thread is specified at a given distance from the shoulder. The thread form is also specified. Never could get the hole wizard to do those threads. If you know, please let us know how. Thanks.
Thanks from Australia brilliant tutorial
thanks Australia and it's my pleasure.
You are genius from morocco
Thank you for this tutorials
Thanks a lot can finally get my assignments done now
Thanks alot sir ..god bless you 🙏😁
Nice Work -- you have endless videos and examples.
your tutorials are very helpful actually....thnks ...
Muchas gracias, esta genial el tutorial. Saludos desde la ciudad de México.
Thank you very much, this tutorial is great. Greetings from Mexico City.
Thank you from Greece. very nice
Thank you so much, it was a great tutorial!
Thanks,
Thank you for making such nice tutorial.
Well done! Thanks! Greetings from Mexico!
Tank you for video , good work.
Thank you from Türkiye..
Thanks for watching, i hope you enjoyed.
I thank you from bottom of my heart
Such a great teaching. I am from Ahmedabad, India. However you have to explain more that why you selecting a particular tool or taking a particulare step.
Thanks you for makeing solid work more interesting ....
Super sir PROJECTS
THANK YOU FROM COLOMBIA
Thanks from indonesia, good job brother
Thank you so much you are really brilliant
Thank you from Jordan, it is so useful.
Thanks from Switzerland
Thanks from Indonesia..
Great effort!
Thank you sir
I watched the video. There is 1 problem when you dimension the wireframe. It seem to me you dimension the "radius" not "diameter". To correct that when you pick, you pick the center line first then pick the line and drag dimension below the CENTER LINE then it give you a "diameter" dimension instead of "radius".
Second problem you don't need to create 2 curves (for diamond knurl) just create 1 curve then mirror that curve then do pattern. Try that, let's see it works.
yup i just learned that trick
Why would you not just use the SolidWorks threading feature that uses actual die sizes?
Good tutorial
nice
well done , thank you
Nyc
real me thanks so much sir all SOLIDWORKS video download me
Shukriya!
Thank u Ji
Very good, thank you very much!!!
Bravo e grazie
thanks,
excellent bro
Enjoyed
Thank you so much for your excellent tutorial!
thanks your tutorial it's good ;) (y)
Lord i have one sugestion , try for new vido in solidwork plane for huge piping and made refinery .
İts good to use custom thread methods. But solidworks provides a thread function. İts better to use it if you are in hurry
Lord you are very famus everywere you have reall friends.god bless hendostan.
thanks for your nice videos and can you explain about trim entities?
i made tutorials on trim entities, check playlist for beginners tutorial,
did you have tutorials for Plastic paint bucket with top Lid cover & opening Tab . Need help.
that is greatz.
thank you so much.
Thanks
CAD CAM TUTORIAL thank you from africa
Sir jaise aapne thread banaye usme hum spring ko extrude karke cylinder me se subtract bhi toh kr sakte hai na??
Where from do you get the dimensions. If you have it in the form of 2d diagram, please tell the link to download it , sir please!
Hi thank you very much, can you give us the Dimension in the First of Videos to try selftry
thank you
from Algeria
Thanks.
Can you explain why you used opted to cut the path of the threading manually as opposed to using the built in thread feature in Solidworks?
Same reason as he created the knurling and not imported from tools
Thank you! Works but slows down solidworks so much. Any ideas on how to stop it from being so slow??
(I have a i9-9900k, rtx 2080ti, 16gb ram)
check your performance properties in the tools tab under options
thanks for you
Left hand thread ?
THANK YOU
How your model is having metallic finish before applying any material, i use 2016 version but my model is dull grey.Is there any option?
There is something called as real view graphics in solidworks, if you have any graphics card you can activate that feature.
My friend when I finish a part I m going to the library to put a color on it. For ex. I put nickel or something which it must shine but it doesn't shine at all. What I must do? Thanks
You need to enable realview graphics
Sir how triangle is coinciding?when I'm clicking on bolt point no options are coming
Sir make videos on solid work simulation basics....
I have problems defining height and length is there a certain trick i need to know ?
super hero
Thanx ❤️
Thanks sir🙏
Why not use thread command?
hi sir u have done any tutorials regards sheet metal in creo
Bro please teach us how to do principle sketchs
It give me an error when i try the circular pattern (o thickness geometry) How can i fix this?
You need to check your draw, maybe you didn´t give it the correct relation with the circle. And check the angles, I had the same problem.
Thank you for the advice😊, I hope will work
Why left-hand threads?
thanks
error message when knurling started, "the sketch must contain only a circle", please help
version de solidworks ?
much thanks my guy! this was a good meme
Which software you you
👍
Dear sir,how to find out /calculate the weight of any metal rod /sheet etc. in Solid works;also how to confirm density of the material or is correct.please guide.
Click on the Evaluate tab, then on Properties. There you'll find the weight and density.
i have sw 2018 and i dont have option make coincident
Revolution 13 mm? Or only 13?
I found geometry error during applying circular pattern! WHat to do????
Sir your convert entity is not clear......on the bolt head
Have any of you guys have the problem of self intersecting sweep at 7:20
Sir my display material no changes when change material type so plz help
double click on the material
Pleas lneed the name of program
May I know what the app name..
Sir please make video proper visuable
knurling depth is too much
Md. Mahabub Alam i will rectify it,