How To Make Deep Lap Joints & Cut a Perfect Lap Joints

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ธ.ค. 2024

ความคิดเห็น • 53

  • @rickbratto6167
    @rickbratto6167 2 ปีที่แล้ว +13

    Dang, that little tip on take a 64th and a 64th is awesome… and I would never (in a million lug-head years) ever have been practical to think of doing so. Million dollar tip of knowledge. Thanks from me and my son! Love learning new stuff.

    • @johnsrabe
      @johnsrabe 2 ปีที่แล้ว

      I would have thought of it, and promptly taken the 64th off the wrong edge.

  • @SawdustmakerLori
    @SawdustmakerLori 2 ปีที่แล้ว +4

    Great tips Jon! Thanks for taking the time to do this video!!!

  • @denisruiz1068
    @denisruiz1068 2 ปีที่แล้ว +2

    Hello Mr Peters! Greetings from Nicaragua. God bless you always.

  • @tomaylor3683
    @tomaylor3683 2 ปีที่แล้ว +2

    Great idea on shaving the 64th. I might also consider doing the last method on all lap joints instead of trying to nibble out the cuts.

  • @domsrosales
    @domsrosales 2 ปีที่แล้ว +2

    hello Sir im from philippines.i have a lot of things learned from you about wood the working.thank you Sir

  • @ericnicastro
    @ericnicastro 2 ปีที่แล้ว +1

    The tip taking off a 64th was so smart. If both lap joints are the same size, why not cut them at the same time? I learn something new every time I watch one of your videos.

  • @garvinsimmons
    @garvinsimmons 2 ปีที่แล้ว +2

    Hey Jon thanks for the lesson my request is can you also show how to make this joint using Sheet Ply or MDF for example like for shelvings

  • @carbonfe
    @carbonfe 2 ปีที่แล้ว +2

    Excellent procedure tips! It really made me laugh when you said "OK, that wasn't supposed to happen..."

  • @williamellis8993
    @williamellis8993 2 ปีที่แล้ว +1

    Great info, Jon. Thanks.
    Bill

  • @kenc2257
    @kenc2257 2 ปีที่แล้ว +1

    Interesting. I didn't remember the 'building' of the lap joint for the round Lilly table--this was a good refresher.

  • @juneritchie2498
    @juneritchie2498 2 ปีที่แล้ว +1

    Great, well paced tutorial!

  • @davidmeyer9204
    @davidmeyer9204 2 ปีที่แล้ว +1

    Thanks Jon. I always learn something from you.

  • @dsmith5372
    @dsmith5372 2 ปีที่แล้ว +1

    I love these videos! Great learning from someone with such skills, and a professional!

  • @MCsCreations
    @MCsCreations 2 ปีที่แล้ว +1

    Fantastic tips, Jon! Thanks a lot! 😃
    I need to show your video for my father tomorrow morning! To show the difference the blades make, because of a project he wants to make!
    Anyway, stay safe there with your family! 🖖😊

  • @jameswalsh4056
    @jameswalsh4056 2 ปีที่แล้ว +2

    Appreciate the video Jon. I wondered if there should be some accounting for glue volume within lap joints when setting up for cuts. I have had a perfectly flush dry fit on religious crosses that I've started building and end up with a proud appearance on both sides after glue up. Thanks again.

  • @andrewbrown8148
    @andrewbrown8148 2 ปีที่แล้ว +2

    Great demo, Jon~! I like the trick of ripping the thinnest slice off of the opposite side of the notch to make the faces flush. Great tip~!!
    Don't know if you've ever tried this one, but I'm practicing with a new joint of my own: the castle (or Shiro) joint. We saw the ad for the bed frame that uses them (Thuma) and I'm taking on constructing my own. I'm using some crazy expensive 2-by as well to do the mock up (practice) before tackling the hardwood. Looking at either Walnut or Cherry for the bed frame. Can't wait to see how this turns out~!

  • @sapelesteve
    @sapelesteve 2 ปีที่แล้ว +1

    Now those were excellent tips and tricks Jon! I also like the fact that lap joints are very strong & stable joints when done correctly. Great video! Thanks...... 👍👍👏👏

  • @hobobear188
    @hobobear188 2 ปีที่แล้ว

    Clever... that last trim was very helpful.

  • @bearsmoker6793
    @bearsmoker6793 ปีที่แล้ว

    excellent tutorial. Thanks Jon!

  • @ironwood1621
    @ironwood1621 2 ปีที่แล้ว +1

    Great info.

  • @AZCobraman
    @AZCobraman ปีที่แล้ว

    To set the width you can use an off cut set against your stop block. Make the 1st cuts and then remove the off cut.

  • @garysobczak9931
    @garysobczak9931 2 ปีที่แล้ว +1

    Great video... again!!!

  • @bobnicholas5994
    @bobnicholas5994 2 ปีที่แล้ว

    Great as usual thanks Jon

  • @JamesCaldwelll
    @JamesCaldwelll 8 หลายเดือนก่อน

    Very nice advice thank you

  • @woodenarticles4533
    @woodenarticles4533 2 ปีที่แล้ว

    Taking me back to high school💓😊

  • @wpphili
    @wpphili 2 วันที่ผ่านมา

    Awesome video, thanks!

    • @JonPetersArtHome
      @JonPetersArtHome  2 วันที่ผ่านมา +1

      @@wpphili thanks! Appreciate the good feedback 👍

  • @rickculpepper709
    @rickculpepper709 2 ปีที่แล้ว

    Good stuff john

  • @JGerm
    @JGerm 2 ปีที่แล้ว

    Great video !

  • @danyodice1048
    @danyodice1048 2 ปีที่แล้ว

    Great video Jon...🤘🤘🤘

  • @davecurda2350
    @davecurda2350 2 ปีที่แล้ว

    Great tip

  • @dennisferron8847
    @dennisferron8847 ปีที่แล้ว

    Oh hey this gives me an idea for building cube/cubby storage. If you alternate vertical and horizontal (and don't care if the shelves are slats instead of sheets) you could make a grid of cubbies without any cutting at all (like a tic tac toe hash).

  • @JasonWjddphotography
    @JasonWjddphotography 2 ปีที่แล้ว

    well done. im looking into making a pantry shelving unit with 1x8's, about 48" x 66", hoping this might be doable.

  • @purehenry
    @purehenry 2 ปีที่แล้ว +1

    Thank you Jon. Amateurs like me always wonder if a lap joint is a good thing or not.

  • @FilmFactry
    @FilmFactry 2 ปีที่แล้ว +1

    If both pices are the same length, why would you not have cut them together? Half as much work?

  • @Art-is-craft
    @Art-is-craft ปีที่แล้ว

    Do not be scared of hand tool wood working. It is not as time consuming or as hard as people think.

  • @m007mm
    @m007mm ปีที่แล้ว

    Would you call these half lap joints, or cross lap joints?

  • @johnsrabe
    @johnsrabe 2 ปีที่แล้ว +2

    4:10 clearly this is a faked video … in a real video the carpenter drops the nut into the sawdust below the saw. At least twice. Also, no swearing. And, he turned the nut the right direction the first time.

  • @Mpafanai46
    @Mpafanai46 ปีที่แล้ว

    Why not using a kerf maker or a table saw blade thickness shim

    • @Art-is-craft
      @Art-is-craft ปีที่แล้ว

      People should experiment and use hand tools along side machines.

    • @Mpafanai46
      @Mpafanai46 ปีที่แล้ว

      @@Art-is-craft he used table saw not hand tools in this video

  • @alanrichardson7244
    @alanrichardson7244 2 ปีที่แล้ว

    Why don’t you just use a kerf maker? They’re very precise!

  • @sethwarner2540
    @sethwarner2540 ปีที่แล้ว

    I see why the un-intentional perfect fit happened; your stop block is held by a SPRING CLAMP!! (just a little too much of a BUMP, and whoops! -miscut)

  • @peterfitzpatrick7032
    @peterfitzpatrick7032 2 ปีที่แล้ว

    Jon, I was taught to call this a cross halving joint ... 🤔

  • @richardepps8500
    @richardepps8500 2 ปีที่แล้ว

    This guy's neck makes pro wrestler's necks jealous.

  • @steenfraosterbro3268
    @steenfraosterbro3268 2 ปีที่แล้ว

    and you are doing all this being allergic to pine. I know a hero when I see one.

  • @ericnicastro
    @ericnicastro 2 ปีที่แล้ว +1

    The tip taking off a 64th was so smart. If both lap joints are the same size, why not cut them at the same time? I learn something new every time I watch one of your videos.