I Didn't Break This One! // 2203.5 Motors on 6s // Diatone Roma F4
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Micro guy flies a heavy quad :) 4inch props are a better match for these beefy motors.
Diatone - Roma F4
Analog - bit.ly/3ln0LUE
HD/Vista - bit.ly/3AiVkdO
Power (Add your own DJI) - bit.ly/3AAnjG9
Banggood - Roma F4 - Use Coupon "BGNickBurns" 8% off
Analog - bit.ly/3Fsm0fS
HD/Vista - bit.ly/3uSEL7n
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use the Jumper T-Lite bit.ly/3ohjEXp
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc
For right now I only see this listed at Diatone and Banggood. Does comes in a 4s version as well.
Diatone - Roma F4
Analog - bit.ly/3ln0LUE
HD/Vista - bit.ly/3AiVkdO
Power (Add your own DJI) - bit.ly/3AAnjG9
Banggood - Roma F4 - Use Coupon "BGNickBurns" 8% off
Analog - bit.ly/3Fsm0fS
HD/Vista - bit.ly/3uSEL7n
😀
Hi Nick, nice review as always! How is the overall noise level of this quad? Is it something that would annoy your neighbors if you flew it often?
I got a bit of feedback from one of my neighbors about some of the noise. I did start flying a 5" HD Nazgul 6s this summer after flying micros for a couple of years and of course it is a bit louder in a different way (lower pitch), I do try to limit how many flights with the 5" to just 2 before I switch back to the micros but that still didn't seem to make them happy...
@@dronereviewman9580 😀
@@Therberg2500 It does have the potential to being annoying, especially if the neighbors were outside while I was flying. I would think most micros aren't more annoying than say a law mower, but they do sound different. It could be the noise is just different and that is catching their attention.
Watching you fly a 4” in the back yard is the best. Great job of taking the beast. This is another 4” frame I’ve been thinking of building.
I am always impressed with the quality of Diatone products.
Just got my first diatone stack. The f722 app fc is dope!
Had to recheck to see if I had clicked on the right channel 🤔 Nick flying a 6s rig ?..in his back yard 😲...lol..🖖🏼
🖖😊
lol, I need to be sure to request 4s versions. I am pretty sure I did with this one. I guess the manufacturers are baiting me to fly bigger and more cell count quads.
Thanks for another comprehensive review. And I agree,, would be tempting to dedicate as a racer if it had swappable arms. I would get extra arms and motors and m30 connectors for quick swaps. I've been working on your roll following the yaw spin trick and almost have it down.
Great video yet again. I'm always looking for Mr. Nick Burns in my sub feed! Looking forward to more micro coverage and love the 4 inchers.
Yup this thing looks fun as heck
Wow that first clip bro, RIPPING IT UPPP!!! 🔥😍🔥
I LOVE diatone and mamba is the FC I use in all my builds. Seeing they have wire protection on the arms is legit awesome. I've gotten into the habit of using kevlar tubing for all my builds since chopping too many motor wires when I bend a prop. Haven't needed to do repairs anywhere as much now!
[answered-analog] Just to clarify, was that analog or digital DVR!? It's so cleannnn. Lately my mamba builds have also had super clean video, I think they fixed a bunch of noise from their FC/4in1 esc's on later/more recent production runs.
I absolutely would love to own and rip one of these. I might actually pick it up, would be my first prebuilt in 2 years almost!
Holy crap Nick a 4" in your backyard. There goes the neighborhood. Lol
Probably what the neighbors thought. I did ask my wife and kids if it could be heard in the house, they said they didn’t notice so I am hopeful I didn’t disturb to many neighbors
The fact you can rip this beast in your backyard again and again is truly amazing. Keep up the amazing works. Diatone just had a sale and I picked up the power pack for only $130. Can't wait to get it.
Lol, thank you
@@NickBurnsFPV hi, a question. How would a 2005 motor perform in 4 inch class?
@@AfafPrinceOSH I would expect it to do well and be much lighter than 220x motors. Less weight out on the end of the arm should help arm durability.
@@NickBurnsFPV a volume comparation between 2203.5 & 2005 stators shows 1330 & 1570 mm^3. Would it increase the performance for a quad weighing 320+gm on 4 inch?
@@AfafPrinceOSH Well I don't follow formulas for my choices to much. Our components have so many variables. For motors: Weight, more or less, low throttle response vs top end performance. More motor volume does indicate it should handle a larger prop with more authority at a higher efficiency.
Fantastic flying, Nick!!! Sick as F! 😃
I like the quad! The frame really looks beautiful!
Great review as always!!!
Stay safe there with your family! 🖖😊
Hey Nick... I saw a maneuver that I hadn't noticed before and really like. I like the power loop over the house, power on and inverted doing a half loop as opposed to the punch and float that you normally do.
This quad is definitely on the large side for your style and flying space but it looks like it is maneuverable enough for you to manage reasonably comfortably. Still, the space is better for 3" light weight quads. This quad certainly has the power to be well suited to a much larger space. More good stuff. :thumbsup:
J.P.
Yes, I don't always do that, often I need to have a certain amount of power and weight, otherwise I end up short, or I have to stay on the throttle so long its not so much fun. :)
That dive in the trees looks so cool!
I like the idea of side plates. They really keep things cleaner when running props out.
The clip on sides was a good move. Super easy to gain access if we need it.
Man you're ripping! feel the Burns!!! : )
Glad you did not break this one!!
great flying
Lol...*SNNAAPP* totally can relate. It still makes me jump sometimes man. It's a good reminder of weather or not the pack is fully charged too.
Yes it is truely a different plug in experience 😄
Another fantastic review thanks buddy 🥂💯👍🏼
Not about this product, but with your rep, would love to see you work with a mfr to produce a rubber/kevlar strap for 3s and smaller toothpick/micros... That emblem would look so cool on a lipo strap!!
Nice Quad, great job
Nice flying!
You have good neighbors Nick...if I fly anything louder than my GEPRC Phantom or Nanohawk X around my yard people get grumpy.
Yes am pretty careful not to fly to much when the close neighbors are outside enjoying the day. If I am flying and they come out I might fly one more pack before stopping for awhile
Thank you for the review I've just ruined my lovely Avant quad unfortunately. I'm looking for a replacement but I would consider other options probability. A solid top plate doesn't look like a good engineering decision. It will brake sooner or later.
I presume your looking for something with a canopy style body? Seems that is the way to avoid a top plate. Or is it the top plate with battery also on the top plate?
have u seen th long range version it has part numbers printed on all parts and not a one peace base has a single front arm and two rear arms. real good frame i have it on 2004 2550kv nbd flow 6s
brilliant! Looks solid!
You da man Nick!
Looks nice! But unless I see a super deal right now, I'm going hold off on buying anything else seeing that winter is coming fast!
You get cold and snow where you are?
What do you think about them switching from a f7 40a stack to an f4 35a AIO? It seems a little backwards but, maybe the lower kv motors will not need as much amperage protection.
Exactly what I was thinking, sounds like the F-35 is the best way to go.
Traditionally, we would see repair costs to be less with a flight stack, as we can replace one of the two items rather than replacing the AIO. I don't get to worried about ESC rating on those above 15amps, we see far more esc damage on smaller esc below 10amps. The f7 would future proof the quad more, as at some point we will need the f7 to effectively run betaflight, but we might kill it before that time :)
@@NickBurnsFPV I worry about esc rating when a prop gets caught on a limb or when you turtle. It drives the amp draw up when the motor is under heavy load. I mostly only worry about that on 5" quads though. I like the idea of AIOs but am scared to use them unless they have a high amp rating.
@@PropDusting ah I would worry about it on micros too. Those AIO esc aren't generally so hardy.
Are the bottom plates switchable between the 3.5 and 4? Might be interested in converting my 3.5 with a bottom plate
I have a Roma F4 long range quad. It did not fly well or work well out of the box, but after some modification, it now flies very well. GPS did not work, and the vtx was set to 25mw out of the box. I had to load a LUA script to get the 400mw that the Mamba vtx was rated at. I installed a much better satellite antenna a Matek Systems M8Q-5883. I designed and printed a TPU extended mount for the antenna and shielded the wires going to the antenna. I also moved the crossfire antenna from the back to the front. Now it gets a lock in less than a minute and flies well. Diatone should not sell these as long range and disable the satellite and set the vtx to 25mw. Makes no sense!
Sorry to hear the LR didn't come out of the box performing well. I am curious about the lua to get 400mw. Was this part of the myvtx with crossfire?
@@NickBurnsFPV There was a how to article telling how to load it onto the Mamba vtx through the vtx tab in betaflight provided by Mamba. You had to load the script and it set the channels and increased the power levels from on to four.
@@parker1ray oh you mean the json file for vtx tables. Gotcha. Sorry I am so literal I get confused.
@@NickBurnsFPV I frequently use technical terms such as thingamjig and whatchamcallit. I am not even sure what a json file its but all that I can tell you is the directions from Mamba were pretty good as is not the case with most Chinese companies that use Chenglish!
@@parker1ray That is good the directions were clear.
Hey @NickBurnsFPV did u do anypid tuning on f4 mine seem to float aroud a lil off throttle and have some boynceback on rolls ...if u did tune it could i copy it still kinda when it comes to pid tuning i love the quad just wish it was more locked in...love your videos thanks
No I do not change pids or filters for review. It is very rare for me to continue to work on company pid tunes post review. Maybe they updated the pids on their support site?
Hi nick
Love your videos
I have a problem, I lost the screw that holds the bell on my motor of the Roma f4 6s. Can’t seem to find one anywhere. Any idea where I can find one? Thank you
oh thats a tough one. We probably need to know the specifications for the screw. I suspect its an m3 maybe 4mm. Maybe dig around on the diatone website and fine more exact details.
Bet your neighbours loved you with all that racket compared to the normal stuff lol
Thankfully, no complaints. It is a loud mouth :)
Great review Nick!
It’s really strange to see you flying a bigger quad, but after watching your flights I’m kind of curious to see you review/fly a 2Fiddy.
Wouldn't that be something.
@@NickBurnsFPV not sure why, but I kind of got the “in the works” vibe there…
@@iSeeFPV I have thrown you have my trail :) Not really, nothing in the works with the 2Fiddy :)
@@NickBurnsFPVI appreciate all you do and respect your opinion with gear, shouldn’t be taking up this review with another product, but hopefully and maybe 🤞
@@NickBurnsFPV supposedly tommy has a 4"😉 version
Have you tried any other props on this? Wondering is the gem fan 4052 would work.
I have not. They will work but if work means the pid tune doesn’t need adjustment probably not. Thank us a pretty big change in prop pitch
Nice review 👌.. cool flyer.. you need a bigger yard for 6s... to fast..
I agree. I asked for the 4s version :)
nice review, had just build my first 5 inch quad, like you i fly only micros up to 4 inch.
its a nice experience, it feels really big because it is.
happy flying
YES! These feel so huge. And I am hyper aware of the damage potential they have at this size and weight.
I bought the plug & play and hooked up my spektrum receiver where it told me to hook up my spectrum receiver. comes with a sticker that tells you where to plug in. But I can't get it to communicate with betaflight please help
did you select the appropriate DSMX protocol in betaflight?
also is it bound?
@@NickBurnsFPV yes
@@NickBurnsFPV yes
@@aztecjoe29 do you have the uart on that the receiver is wired to?
Finally a pure 4” acro bult instead of that LR stuff 😁 My 4” acro builds usually land closer to 300g AUW, looks like those 2203,5 motors haul the thing around pretty good. 4mm arms are mandatory on the 4”, they add survivability but even more so dampen a lot of the frame oscillations. The extremely clean gyro is part of the 4” fun factor 🤔☺️ Replaceable arms lessen the noise, wonder why they chose the solid bottom plate.
Isn't a single bottom plate less expensive to cut and has less carbon waste? I have heard that a few times.
@@NickBurnsFPV If you're doing small scale cutting at home with those ~120€ CNC-machines, the material use is lower with the replaceable arms - solid bottom plate might eat most of the carbon plate, whereas with replaceable arms you can line things more efficiently. These guys probably cut enough of the frames so that they can fill the empty space between the arms with the camera sideplates etc, so the material doesn't get wasted. The tooling cost is probably fairly similar, replaceable arms don't need much more cutting than the solid plates do. So expense wise what it comes down to is the extra screws the replaceable arms need. Not sure if it's worth the savings tbh, UAVtech has proven on many occasions that the solid bottom plates are worse than the replaceable arms are.
@@pirateradioFPV ah, thank you for that perspective and information.
Thank for good video and explanation about this quad! I still looking for buy, i have just one question. What you think about the 4s battery version? Thanks
4s battery will bring the weight down. 6s should give us longer flights. I worry about durability with the additional weight
@@NickBurnsFPV ok thanks. So, if use 6s 850 mah and mount action cam about 54 gramms you think it's not a problem?
@@matteorosada541 That should be fine.
What’s good motors I can use for this frame with a speedy bee f405 stack ! Want it 6s?
unfortunately I don't have much experience with 6s and in the 4inch prop category.
Nice ripping for 6s in the backyard! Do you prefer this or the avant avio 3.5?
Oh the avio3.5. I am less comfortable with this and it’s weight
@@NickBurnsFPV yeah, I think I'd prob feel the same. I've never had one that heavy or 6s. Prob best to stick to something smaller for the time being lol. I think I'm finally ready to just pull the trigger on the avio.
@@brianfreland9065 I need to check , but I wonder if avantquads came out with a freestyle edition of the 3.5
You flown big drone net it's load faster than them toothpicks you normally fly
Not certain I understand. Its loads faster than the toothpicks?
Not for me but looks fun.
Diatone really better stop making these, I can't afford to buy another one
lol. The next new diatone product will be smaller. I hope it functions well.
👍👍👍
Really bad tune, that huge propwash... I've just rebuild 4.5 inch drone 300g AUW (350g with camera) and it flyes 4-5 min with 4mm arms. Diatone face odd direction when decide to use those pankake motors, and dont keep weight/power/efficient ratio in mind..
I was thinking 2200 kv seems really low for 4" 4s, then I saw you pull out the big boy batteries. Lol this one looks fun!
lol, that 6s snap, gets me every time. I think I have just killed a component.
love your Vids in general--- but sick of analog reviews...
oh no. Digital products have certainly slowed. Cameras are specifically stopping many new products and the manufacturers are hesitant to send out digital product for review.
Personally I find these drones to be overweight.....
Not being someone that has flown the 5inchers in years, I am not familiar with the typical weight of those vs these. Seems it is likely somewhat close in weight.
@@NickBurnsFPV actually their quite light in comparison to a freestyle 5 inch rig.
But for me just watching your punch outs over the house it looked a it fat and slow. :-)
Theirs also the sub 250g consideration. Yes I know these aren't marketed at that but i think they would fly better and longer with less weight
@@gmivisualsjason3729 Maybe shotgun approach. Take what they have an see if they can gain some hot new product. I think fpv is fairly notorious for that.
@@NickBurnsFPV Agreed