Exactly, Cause U can make all pretty but what about FUNCTION ? Cause lets say something happened Will U remember his SET UP or do U have to call him again to help U out sith wiring. Much Love G Project looks killer
I'm not a fan of stretched tires, i prefer maximum grip (to each their own though) BUT i will say, i absolutely love the colour of your G! Nice conversion and very tasteful build man. Kudos! I'd say ditch the stretched tires but I'm sure you won't listen lol cheers 🍺
Nice to see someone do a video on this stuff. I've done all of it. I actually make 350z/g35 dress up harnesses. To anyone who watches this video here is my advice. Don't be lazy. Take out the harness. Makes life way easier. If anyone wants a harness made hmu!
Around the 3.50ish mark, you are talking about removing the fuel sub-tube, and thing that goes to the EVAP. I just wondered if you had any problems or had to do anything else ? Great vid btw, really helpful and I'm glad you showed lots of detail !
Im not the 1 to like n comment 4 the hell of it, but let me tell U Infiniti Comrade U have a sick Stylish Car and this vid come with dedicstion n focus hard work and passion . Gud work 👍🏻
Will extending or shortening any of these wires be a problem. I know most sensors run off a resistance so if you shorten a wire or extend it, it’s going to change the resistance.
What did you do with the Two fuel lines? I only see one connected in your video but I'm trying to figure out which one and what you did with the other line?
I just did the wire tuck on mine DONT put the ground on the intake manifold stud it caused a misfire in cylinder #4 for me I moved it to another ground that’s right beside the passenger side cams (had to extend the wire)
Hmmm... Well My G think about this, tucking all the wires, did U forget all that heat the Ngine ? HEAT wraping all of them, Use ZIP Tiez instead can easily be taken of by a MINIA ture screw driver, Great Project Tho
Cosworth upper plenum is dope... If I didn't live in Cali I would do more to the engine, but for now, just QoL maintenance stuff and cosmetics since I want to pass smog 😂
Tucking wires must be a secret art form! I have never seen it done in real time! I hope this channel blows up!
Exactly, Cause U can make all pretty but what about
FUNCTION ?
Cause lets say something happened
Will U remember his SET UP or do U have to call him again to help U out sith wiring.
Much Love G
Project looks killer
I realize it is kinda randomly asking but do anyone know of a good website to stream new movies online?
@Jett Lucas lately I have been using FlixZone. You can find it on google =)
@Jett Lucas i watch on FlixZone. You can find it on google =)
@Jett Lucas i would suggest FlixZone. You can find it by googling =)
Bro that's just about the best looking g I've seen, that conversion looks awesome!
A wire harness guy with OCD is hard to find props to your guy. And props to you for filming .
I'm not a fan of stretched tires, i prefer maximum grip (to each their own though) BUT i will say, i absolutely love the colour of your G!
Nice conversion and very tasteful build man. Kudos! I'd say ditch the stretched tires but I'm sure you won't listen lol cheers 🍺
Absolutely beautiful everything you have done to your g is tastefully done
I was so lost on why that G37 didn’t have a Vq37 or even an HR but an old ass rev up, then I realized it was a front end conversion. Looks sick bro!!!
At the 4:45 area of the video he’s talking about deleting the random hose and covering it up with caps. What does that hose go too?
This is beautiful, I'm in love with my vq again!
Nice to see someone do a video on this stuff. I've done all of it. I actually make 350z/g35 dress up harnesses. To anyone who watches this video here is my advice. Don't be lazy. Take out the harness. Makes life way easier. If anyone wants a harness made hmu!
Bro how can I get ahold of you
What're your socials I'm doing an hr swap on my G but the harness I got from the donor car is a little beat up
You still make harnesses?
I commented my ig 11 months ago but it was deleted for some reason.
@@austinmoffett1959 yessir
Engine bay looks crazy sick!!! Awesome work brotha, hope all is well with your recovery!!🤙🏽🤙🏽🤙🏽
This by far the best looking g35 coupe! PERIOD! What exact color is that ?
Didn’t even know this was a thing .. dope
I love the g37 front end I might consider doing it to my g35 sedan
Damn wish I had car homies like this
I want to tuck the wires on my Vq35hr sedan, but need a few days off when it warms up a bit more . Hoping it comes out looking as good as yours !
that looks clean af, but complicated af too nicee looks dope
nice now I'm ready to see the other wires tucked also
Around the 3.50ish mark, you are talking about removing the fuel sub-tube, and thing that goes to the EVAP. I just wondered if you had any problems or had to do anything else ?
Great vid btw, really helpful and I'm glad you showed lots of detail !
Ignore that, I can see its just simpler than I thought.
Where did you get the valve covers from looks cool
Did you figure out were to get them I want a pair bad
After watching this, I’ve concluded I’m ok with my wires. 🙂
I’m wondering where did you get your hoses ? I would like my engine bay like yours
Where did you get those valve cover purple metal covers
Hey buddy nice whip where did you get the covers that you got to cover the coil packs? I want a pair for my car. where can I buy them?
Where did you get your air suspension at. Great video
Im not the 1 to like n comment 4 the hell of it, but let me tell U Infiniti Comrade U have a sick Stylish Car and this vid come with dedicstion n focus hard work and passion . Gud work 👍🏻
Thanks for making this! Will use this as reference for mine!
Will extending or shortening any of these wires be a problem. I know most sensors run off a resistance so if you shorten a wire or extend it, it’s going to change the resistance.
I never actually shorten any wires, I just fold them on themselves, sleeve it and zip tie it
That hose up front by the timing cover. U deleted and capped? Its a coolant hose yeah? Is it not necessary?
Thats gonna look really good bro! 👏👏👏👍
What did you do with the Two fuel lines? I only see one connected in your video but I'm trying to figure out which one and what you did with the other line?
i have the same done to mine. how did you wire the starter to the alternator and where did you ground them too
I just did the wire tuck on mine DONT put the ground on the intake manifold stud it caused a misfire in cylinder #4 for me I moved it to another ground that’s right beside the passenger side cams (had to extend the wire)
Where did you get those purple shrouds? What are they specifically called
Coil pack covers
I really want to do a wire tuck now and get that plenum for my g35 coupe. You should do a valve cover paint. Im also thinking of doing that
What’s the purpose of the hoses you capped off
That looks amazing.
Why don’t you need the pump in the front anymore ? Does a regular vq need it or can I take it off mine too I’m doing this on the weekend
Are you planning to boost this? Those intake manifolds work better for boosted applications.
Eventually after I get new block this one has 241k miles
I'm surprised he doesn't have an air intake. That was like the first thing I did to my Accord!
Haha
Maybe he's smarter than us and knows they don't do anything lol
What did you do with the rear fuel rail tube on the right side?
Where did you get those headlights?? They look goood💯
Great video.... where did you get those steel hoses from
If you figure it out! Please let me know! I've been looking for them fot months now
Same here
@@gallion75 same guy that he mentioned on the video . Chris , he does all of that.. dress up kits and braided hoses
need that intake manifold
Hi ! I was just wondering what you guys actually did for the fuel side ? I’m trying to remove the bracket as well
Wondering the same thing did you figure this out ?
@@gthangdad862 sadly not yet. Never pulled through with doing it because I didn’t know how it was done
Need someone to do my engine bay like this
thats one way to do it
Hmmm... Well My G think about this, tucking all the wires, did U forget all that heat the Ngine ? HEAT wraping all
of them, Use ZIP Tiez instead can easily be taken of by a MINIA ture screw driver, Great Project Tho
I have 2 of those cosworth intakes.
Selling one?
What’s the hose for you deleted at 19:22
ready for the vhr swap, will you be keeping ac? my rev up blew the other day and i’m looking for alternatives.
Still need to buy a clutch and then I can start dropping that sucker in 🙌🏼
I want to see this thing get on the dyno with the cosworth manifold. I highly doubt it’s worth the money lol just a flex
🙄
Who do I contact to get the covers for the valve covers
@38carmodz on Instagram
bruh where did u find that intake manny ive been looking for one
Wats tht purple cover ? Imma need tht
What size was the wire loom that you used?
subscribed. please more rev up engine content!
The top of the vq engine just looks so nasty I have no idea why Nissan built it like that
do you have an account with G35Driver ?
The ultimate G35 online forums?
Link to those purple covers? 👀
Dm @38carmodz on Instagram
Hey where do you get the shields that go over the valve covers? And what are they called?
Also do you think doing a wire tuck on a g35x is possible or similar?
where are the updates ?
I couldn't hear who you got the valve covers from. Where can they be bought?
@38carmodz on Instagram
JD. Do you work for cash? Lol. Great job
How do u check tranny fluid now?
Where can I get. Those
whats that intake called
Cosworth but I can't seem to find it ether
@@carmeloespinal2640 they are on the used market. Usually run around $1,200
this is the closest thing ill get to a maxima lol
This is intense
Yeah now do it to my vr30 😂
This is a revup motor??
Yes
Cosworth upper plenum is dope... If I didn't live in Cali I would do more to the engine, but for now, just QoL maintenance stuff and cosmetics since I want to pass smog 😂
Good video
What mods for you to get flames🤔🤔🤔
Just get any aftermarket pipes to replace the cats
@@edimaya2951 just blew my mind buddy lol i thought I'd need more mods can you pass smog 🤔😂🤔
that looks waaay better
Beauty.
I do wire tucks in Missouri hit me up 🤙
Welp, I am flagging this video due to its pornographic content.
I’m done boycotting your videos since ur working on the engine bag
Bay*
@@toad-nopanic9860 bag*
Can I fly you to Atlanta
Let’s do it 🔥
@@edimaya2951 It's a VK45DE
Definitely hitting him up for a wire tuck!! He got an email? I don’t have Ig