I have the edge 110’s and just bought the next 125’s. The next run about a size too large for my foot. They’re a beautiful skate in the brown, unfortunately they’re too big. I’m returning for the maxxum edges but if a smaller size next was available, I’d definitely get them because they’re incredibly smooth and quick
There is an easy way to fix the pressure point issue of these plastic sheld skate boot: get a Dremel rotary tool to erase some material from the inner surface of the boots, The wall of the front end of these boots can be as thick as 6-7 mm, you can safely remove 2-3 mm without compromising the integrity of the boots, and that usually enough to fix any pressure point. The twisted edge has a 165 mm frame mount, which is standard in "inline skate industry", you can buy any frame from other brands (seba, flying edgle) and install it on the boots. On the powerslide trinity side, you are stuck with trinity frames, which are crazily over-priced.
PS got some "Elite" frames for about 60 bucks, don't know where this is over-priced... And you get a stock heat moldable liner for less money, so no need for messing with the boot or buy an extra liner... RB makes fun but overpriced skates and you got to be lucky to fit their skates or you'll get pressure points (try to cure my ankle pain for about a month now)... I have to admit though that RB boots seems to be a bit more supportive for bigger wheels... but with an after market liner to release pressure points it will cost like twice of a PS skate... So the biggest plus for RB imo is their Hydrogen wheels which seem to be unmatched!
I think the Rollerblade has a higher price because of the hydrogen wheels that are way superior than Spinner wheels of Powerslide. This 110 Next should also come with Undercover wheels like the 125mm version comes.
I agree. Also the frame on the RB is extruded compared to the casted one on the Next. But the thing for me is that the fit and ride of the Next is more comfortable than the Edge
I own both and got a blister from my edges. That said, once they break in, they’re amazing. Don’t give up on the edges. Ideally, the next is good for long cruises. The twisters are durable like a tank. Definitely more maneuverable too
Powerslide next are unsuitable for people with wide feet..I found this out the first time I put them on..kills my feet..now they are dumped in my cupboard..I wish the seller had put more information in the description..I have seen the same comments online..I have now purchased a pair of RB110 3WD..described as suitable for wide feet people..I’ll use the next skates for spare parts..wheels..laces..
I just got the next two or three weeks ago and one thing I will say. They aren't nearly as good looking as twister. I saw twister in the store and was a absolutely floored at how cool they looked. I was honestly expecting the next to be a little better looking than they ended up being. As to quality, performance, comfort etc. not going to comment yet I've only just gotten them.
Thank you for this! I've got a pair of Seba FR's with 80mm wheels (slalom skates) and am about to get a pair of Tri-skates, so sick and tired of vibrations and much lower speed than I had with my older K2 boots. Though the Seba are much more maneuverable and I love them for that, they're just not much fun for city skating and longer faster runs with mixed maneuverability and tricks. This review really helps as I am considering these two exact models. Or was until I heard all your Pros regarding the Powerslide.
Where is the best place to buy Powerslide skates in the U.S. When i follow the U.S> links from powerslide's website, the sites have very limited options and even more limited sizing options ;/
I would say inlinewarehouse.com. personally i order from the euro shops for non aggressive skates like grindhouse.eu and locoskates. The shipping is higher but sometimes even with shipping you might save a few dollars.
my wide foot does not fit in the powerslide next 100 but the length is fine. Can I heat mold the hardshell to make it wider or should I replace the liner with compressed socks?
Would be nice if you measure the hight of both skates from ground to underside of the boots at the rear mounting. Of course with the same wheels. PS claims a lower stand with Trinity but i doubt it when i see both skates in comparison. Only heel hight counts as you know. Also the weight of both skates would be cool to know. Cheers.
@@Spiritof38Productions I have a Rollerblade 3wd edge and I found it a very painful boot for me. My ankles cry every skating session! Haha... I'm really interested on get a PS Next because of the "movable" cuff. So I've search all the internet looking for this high measurements comparing Trinity and regular frames and didn't find it, until now. Thanks for this information!
Depends on the skate you have, if it is a Powerslide Trinity Mount then you can buy any of the Powerslide Trinity Frames that support 3 wheels. If it is a Rollerblade Brand skate then you could buy the Rollerblade 3WD Frame. If it is a UFS skate you could buy the Kizer Trimax or the Ground Control 3 Wheel Frame.
Right on! My reply was toward ur point (15:50) that the Rollerblade Twister might not have as much interchangeable frames. I think other non-Rollerblade frames also work, while trinity mounting is a Powerslide only thing. Didn't want 2 post that initially, too much writing
Twisters are better. Extruded frame, better wheels and bearings. Looks much cooler too
I agree on the wheels and bearings but the Next is by far my favorite looking urban skate lol
Wow i have both, powerslide core 110, and twister edge 2019
which do you prefer?
@@sageandlilies9142 powerslide next sir, agile, fast
Nice comparison, thank you.
I have the edge 110’s and just bought the next 125’s. The next run about a size too large for my foot. They’re a beautiful skate in the brown, unfortunately they’re too big. I’m returning for the maxxum edges but if a smaller size next was available, I’d definitely get them because they’re incredibly smooth and quick
There is an easy way to fix the pressure point issue of these plastic sheld skate boot: get a Dremel rotary tool to erase some material from the inner surface of the boots, The wall of the front end of these boots can be as thick as 6-7 mm, you can safely remove 2-3 mm without compromising the integrity of the boots, and that usually enough to fix any pressure point.
The twisted edge has a 165 mm frame mount, which is standard in "inline skate industry", you can buy any frame from other brands (seba, flying edgle) and install it on the boots. On the powerslide trinity side, you are stuck with trinity frames, which are crazily over-priced.
PS got some "Elite" frames for about 60 bucks, don't know where this is over-priced... And you get a stock heat moldable liner for less money, so no need for messing with the boot or buy an extra liner... RB makes fun but overpriced skates and you got to be lucky to fit their skates or you'll get pressure points (try to cure my ankle pain for about a month now)... I have to admit though that RB boots seems to be a bit more supportive for bigger wheels... but with an after market liner to release pressure points it will cost like twice of a PS skate... So the biggest plus for RB imo is their Hydrogen wheels which seem to be unmatched!
Lolol 7mm plastic????? Don't listen to this guy. Never dremel your boot. The edges are heat moldable so start with that
I’m paranoid my hydrogen wheels on my twisters are grinding down too fast. I’m ngl, I am already curious about the next 125’s
Great review, THX 👍🏼
PS: pump up the volume!
I think the Rollerblade has a higher price because of the hydrogen wheels that are way superior than Spinner wheels of Powerslide.
This 110 Next should also come with Undercover wheels like the 125mm version comes.
I agree. Also the frame on the RB is extruded compared to the casted one on the Next. But the thing for me is that the fit and ride of the Next is more comfortable than the Edge
Just bought the twister edges they hurt my right foot so i wish i saw this video before buying them. So i could grab the power slides
Try a aftermarket liner, i tried the liners from the edge in them when i had them and it was a big improvement.
I own both and got a blister from my edges. That said, once they break in, they’re amazing. Don’t give up on the edges. Ideally, the next is good for long cruises. The twisters are durable like a tank. Definitely more maneuverable too
@@Spiritof38Productions I will look
@@ComfyDadShoes alright cool I'll stick them out
Hey,great video! I’m a true 11.5 and I like my boot to feel snug but not tight and I was wondering if I should get the 10-11 or 12-13?
I guess go with the 10-11.
Thanks for replying,but aren’t they made tight?
Which skate are you referring to? the Next book for me at size 12 was not tight at all. the Twister Edge at 12 was a bit tight for me.
Powerslide next are unsuitable for people with wide feet..I found this out the first time I put them on..kills my feet..now they are dumped in my cupboard..I wish the seller had put more information in the description..I have seen the same comments online..I have now purchased a pair of RB110 3WD..described as suitable for wide feet people..I’ll use the next skates for spare parts..wheels..laces..
Nice video, thanks. Grtz
I just got the next two or three weeks ago and one thing I will say. They aren't nearly as good looking as twister. I saw twister in the store and was a absolutely floored at how cool they looked. I was honestly expecting the next to be a little better looking than they ended up being. As to quality, performance, comfort etc. not going to comment yet I've only just gotten them.
I agree. the twister is the better looking skate.
Hi, it's been 2 months since this comment. Any new comments about them?
hey, may i ask how your experience with the next has been so far? would really appreciate your answer :)
How about the quality on the Next parts? Lots of discussions out there on the PS parts not holding up well.
I've skated them constantly since I bought them (even upgraded them to 125mm) I've had no issues with the parts.
Thank you for this!
I've got a pair of Seba FR's with 80mm wheels (slalom skates) and am about to get a pair of Tri-skates, so sick and tired of vibrations and much lower speed than I had with my older K2 boots. Though the Seba are much more maneuverable and I love them for that, they're just not much fun for city skating and longer faster runs with mixed maneuverability and tricks. This review really helps as I am considering these two exact models. Or was until I heard all your Pros regarding the Powerslide.
See my comment before you consider buying Next skates..
Did the sizing feel accurate for both of the boots?
The size is accurate. The powerslide is a bit winder and the twister is a bit more narrow.
Where is the best place to buy Powerslide skates in the U.S. When i follow the U.S> links from powerslide's website, the sites have very limited options and even more limited sizing options ;/
I would say inlinewarehouse.com. personally i order from the euro shops for non aggressive skates like grindhouse.eu and locoskates. The shipping is higher but sometimes even with shipping you might save a few dollars.
@@Spiritof38Productions thanks for the info man!
my wide foot does not fit in the powerslide next 100 but the length is fine. Can I heat mold the hardshell to make it wider or should I replace the liner with compressed socks?
No the shell is not carbon its plastic so heat molding is not an option. maybe go a size up?
why is the tip of the boot so shiny? this does make it a bit ugly :( powerslide
For looks I prefer the Edge but for fit and ride I gave it to the Next.
You must have paid more money for the twister because of the hydrogen wheels !
how is the power transfer on trinity vs rb ?
I would say the Trinity is better. Not by much but it is noticable.
@@Spiritof38Productions don't the frames connect to plastic on the next? I feel like the aluminum blocks would be better
Would be nice if you measure the hight of both skates from ground to underside of the boots at the rear mounting. Of course with the same wheels. PS claims a lower stand with Trinity but i doubt it when i see both skates in comparison. Only heel hight counts as you know.
Also the weight of both skates would be cool to know.
Cheers.
That's for the comment. The Edge is 4.4 lbs and the Next is 4.2 lbs. I'll take measurements and update here.
Thank you so far. Wich size do you wear?
Its more weight than i expected.
@@freshasadaisy4782 I wear a US size 12. The weight for both skates is lighter than I expected.
The difference is 1/2 inch. The Next is 1/2 inch lower than the Edge.
@@Spiritof38Productions I have a Rollerblade 3wd edge and I found it a very painful boot for me. My ankles cry every skating session! Haha...
I'm really interested on get a PS Next because of the "movable" cuff. So I've search all the internet looking for this high measurements comparing Trinity and regular frames and didn't find it, until now.
Thanks for this information!
How do I convert my 4 wheel to 3 wheel? Is it possible?
Depends on the skate you have, if it is a Powerslide Trinity Mount then you can buy any of the Powerslide Trinity Frames that support 3 wheels. If it is a Rollerblade Brand skate then you could buy the Rollerblade 3WD Frame. If it is a UFS skate you could buy the Kizer Trimax or the Ground Control 3 Wheel Frame.
@@Spiritof38Productions thanks yeah I got rollerblade twister edge
You will need this www.rollerblade.com/usa/product-detail/?product_uid=300544&color_number=BLK
Rollerblade does have a 125mm frame. "3wd frame"
125mm wheels are available on their marathon skate.
Right on! My reply was toward ur point (15:50) that the Rollerblade Twister might not have as much interchangeable frames. I think other non-Rollerblade frames also work, while trinity mounting is a Powerslide only thing. Didn't want 2 post that initially, too much writing
What was the best in the opinion of the video?