ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Making a vanadium redox flow battery

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ก.พ. 2015
  • The students in the Energy Storage Centre for Doctoral Training at the University of Southampton were challenged to make a battery and test it. Here's what they did.
    Background music courtesy of Incompetech.com.

ความคิดเห็น • 37

  • @Buzzhumma
    @Buzzhumma 7 ปีที่แล้ว +1

    I am going to study vanadium because of this video 🤗🤗

  • @ferhatpertekli1800
    @ferhatpertekli1800 3 ปีที่แล้ว +2

    Hello, I'm working about designing vanadium reflow batteries . How can I get this solidworks drawning or this drawing dimensions

  • @mattharvey8712
    @mattharvey8712 2 ปีที่แล้ว

    Wow........a short store long ......long storie short......i love what u all are doing n ........voltage..?.......?......that cell look like a heart.......i heard if u change temperature. .....u get more power........? Is that a polypropylene membrane??? Cheers

  • @reactionchamber
    @reactionchamber 6 ปีที่แล้ว +4

    could u please tell me, where did u buy this special flow half cell for ur stack?! cant find any online...

  • @charlesvanderhoog7056
    @charlesvanderhoog7056 ปีที่แล้ว

    Error at 1:00. it should read - e (minus) instead of +e.

  • @MTICorp
    @MTICorp 9 ปีที่แล้ว

    good video-- thank you

  • @MaxAigner
    @MaxAigner 8 ปีที่แล้ว +3

    how much are the material costs of the battery and how much kWh does it storage?
    I am not sure if I skipped this information in the video but it would be quite interesting probably for a lot of people, I guess. (?) :)

    • @Belfastisshit
      @Belfastisshit 5 ปีที่แล้ว

      The battery in this video probably stores somewhere around 5W but it's hard to tell

    • @hardchemist
      @hardchemist 4 ปีที่แล้ว +1

      ​@@Belfastisshit Presuming you meant 5Wh that's generous. It's not like they used incandescent lights to discharge the flow battery.

    • @garethbaus5471
      @garethbaus5471 3 ปีที่แล้ว

      The costs wouldn't scale linearly with the storage since you can litterally increase the capacity simply by increasing the size of the tanks without needing to scale the rest of the battery with it.

  • @vyassinghal1949
    @vyassinghal1949 6 ปีที่แล้ว

    Hello ESA ..can you please tell me more about the half cell which you have used in the project. As i am not able to get that component

  • @edoardoagostini1800
    @edoardoagostini1800 3 ปีที่แล้ว

    Hello there, congratulation for the project.
    The membrane that separate the different electrolites what it is???

  • @petevenuti7355
    @petevenuti7355 ปีที่แล้ว

    What alternative proton exchange membranes are there?

  • @ClericChris
    @ClericChris 3 ปีที่แล้ว

    What was the CAS of the Vanadium Oxide?

  • @oderickshimikuluilunga3627
    @oderickshimikuluilunga3627 9 ปีที่แล้ว +1

    Hey guys. I am a student in Chemical Engineering at the University of Pretoria in South Africa. I happen to be working on a project which deals with a vanadium redox flow battery. I am having trouble with my electrolyte solution. I would like to know if it is possible for you to shed some light on the electrolyte with regards to the methods you used and the concentrations of the compounds. My problem so far has been the low solubility of Vanadium pentoxide. I tried to dissolve it in 3M sulfuric acid but I'm getting a suspension, rather than a solution. Any tips would be highly appreciated. Regards. :-)

    • @energystoragecdt2829
      @energystoragecdt2829  8 ปีที่แล้ว +5

      +Oderick Shimikulu Ilunga “We were only using low concentrations of vanadium e.g. 100mM V2O5 in 2M H2SO4 since we wanted fast charge and discharge to allow quick and clear colour changes in the electrolyte - our cell was designed for demonstration to the general public - so I’m afraid we don’t have much experience in dealing with high concentrations. Even at these low concentrations we generally needed to mix solutions for up to an hour to let the V2O5 fully dissolve. This paper (www.sciencedirect.com/science/article/pii/S0378775308024762), which looks at some high concentration vanadium electrolytes, might be of some use to you.”

    • @firedemotions
      @firedemotions 6 ปีที่แล้ว

      Sir, I am doing the same research, can we exchange emails?
      Regards.

    • @parthbhide7120
      @parthbhide7120 6 ปีที่แล้ว

      As am I. Any insight you have with respect to this issue would be greatly appreciated.

  • @lanelebaron
    @lanelebaron 8 ปีที่แล้ว +2

    If I want to build one for myself what info/direction can you give me to build one?

    • @beatflozepp
      @beatflozepp 4 ปีที่แล้ว +1

      Me too, how much it cost to build one of those batteries? I want to use seawater as an electrolyte. I don't know if this would be a good idea

    • @cayrex
      @cayrex 4 ปีที่แล้ว +2

      @@beatflozepp emmm,.... you can not use seawater as an electrolyte, because is vanadium based. You need vanadium oxide solution electrolyte

    • @beatflozepp
      @beatflozepp 4 ปีที่แล้ว

      @@cayrex Thank you.

    • @kam7000
      @kam7000 3 หลายเดือนก่อน

      @@cayrex You can use an iron based redox flow along with salt water to produce similar effects. Vanadium isn't the only material with chemcial electro reactions. This also includes magnesium & more

    • @cayrex
      @cayrex 3 หลายเดือนก่อน

      @@kam7000 For sure,... you have many different chemistries and milions ways to make a cell. But vanadium is the most popular flow battery type which you can find on the market. The next flow batteries which you can also find on the market are all iron redox, zinc cerium, zinc bromine,.... and in the end you have many flow batteries which are in development.

  • @petevenuti7355
    @petevenuti7355 ปีที่แล้ว

    What does "mass transport limit" mean?

  • @dilekyalcn893
    @dilekyalcn893 8 ปีที่แล้ว +2

    Hi, may you give one of your e-mails,please? I would like to ask some questions that's why i study v-rfbs,too. I am a MSc student and am going to make v-rfb cells and test. Please :)

  • @reactionchamber
    @reactionchamber 6 ปีที่แล้ว

    Where did u buy the half cells and the carbon foam?

  • @Morain42
    @Morain42 8 ปีที่แล้ว

    Do you use the same volume in each reservoir, or is one double the other?

  • @roboburr
    @roboburr 4 ปีที่แล้ว +1

    how long does a charged battery of this kind last ?

    • @Da-ko3ye
      @Da-ko3ye 4 ปีที่แล้ว +2

      I read it lives indefinitely because the liquid never spoils, easy to maintain. Image every houses having its own vanadium battery in its basement... Please Energy Storage CDT make an even more easy-to-follow tutorial video to allow everyone to build its own battery, you could change the world

    • @absolute___zero
      @absolute___zero 4 ปีที่แล้ว

      @@Da-ko3ye it is not a battery it is Seventh Wonder.

  • @huat99me
    @huat99me 6 ปีที่แล้ว

    hope your idea to our products

  • @shantahsieh4833
    @shantahsieh4833 6 ปีที่แล้ว

    Really enjoyed your video. Let's check Avasva plans also

  • @charlescedricryder
    @charlescedricryder 3 ปีที่แล้ว

    bunch of swats. I hope you all got firsts and good jobs.