As a locksmith I do this kind of a thing for a living and use tutorial videos when I get into a jam. This is a great guide! Thanks for making this awesome video!
This video was extremely helpful thanks. Good that you edited it so it does not have all the drivel so many videos have you got straight to the point and good text guides. One thing. I was working out side and the temp was very low. The door panel would not go back on so I took it in doors to warm up which worked I believe it had contracted in the cold.
The bolts were loose on the bottom hinge of mine. This video helped a lot and I was able to tighten the bottom hinge. The hinge bolts are t45. I never took the door handle off. mine has 2 cables because of power locks? and I just left it hanging. The mirror was electric so I unplugged the wire. Some of those bolts are T25. Great helpful video, thanks davemunk
Great video! I didn't think it would be so complicated to replace the bloody speakers. At least now I know which tools I'm going to need and perhaps even what I'm doing ;).
Sir. Thank you. You made that very calm. Relaxed. And clear. I will try and replicate this but I used your exact directions to get access to the door hinge bolts which became loose. Bravo. I salute and humbly thank you
Can any one tell me how to remove the inner door handle on the passenger side please ? Mine is loose at the top near the electric window switch so im looking to fix it back on, but cant see any clips or screw holes. Im assuming the fastening must be under the main part of the triangular shaped part of the handle. Any help in how and which way to lever this off would be appreciated thanks or do i need to remove door skin to access the interior door handle
I would suggest, to spray some wd40 on parts that are difficult to remove, as for the plastic rivet for the locker, the easy way to remove it is to remove the central pin first with a knife, then the rivet outer part comes out easy. However my car is a 451 but had no locker screw inside.
Great video! But in cold places doesn’t work! Have to warm the plastic before do anything... with the first try it just shattered in undred pieces!!! 😂😂😂
As a locksmith I do this kind of a thing for a living and use tutorial videos when I get into a jam. This is a great guide! Thanks for making this awesome video!
You're very welcome.
This video was extremely helpful thanks. Good that you edited it so it does not have all the drivel so many videos have you got straight to the point and good text guides. One thing. I was working out side and the temp was very low. The door panel would not go back on so I took it in doors to warm up which worked I believe it had contracted in the cold.
The bolts were loose on the bottom hinge of mine. This video helped a lot and I was able to tighten the bottom hinge. The hinge bolts are t45. I never took the door handle off. mine has 2 cables because of power locks? and I just left it hanging. The mirror was electric so I unplugged the wire. Some of those bolts are T25. Great helpful video, thanks davemunk
great video, clear voice and very nice instructions, great job mate :D thank you so much!
Great video! I didn't think it would be so complicated to replace the bloody speakers. At least now I know which tools I'm going to need and perhaps even what I'm doing ;).
Thank you for making getting panal off pretty easy.fiddly replacing the panal,but job jobbed.Thanks again
Muchas gracias amigo, saludos desde Cancún, México.
Thanks for the great video! You saved me from breaking the clips for sure. Very informative, cheers!
Sir. Thank you. You made that very calm. Relaxed. And clear. I will try and replicate this but I used your exact directions to get access to the door hinge bolts which became loose. Bravo. I salute and humbly thank you
my bolts were loose too!
Great, clear instructions, thank you
I will show this to my mechanic. my driver side window lifter is broken. thanks to this video.it doesn't seem to be complicated.
Thanks for that, just had to replace the mirror housing, passenger L/H here in the U.K. :)
THANKS, GREAT VIDEO!
Great Video. THX
Great video thenks for the help
Good video!
great!, thank you man
Thanks for the video playboy 🫡 I’m going to swap out my speakers 🔊
Very clear ! Thanks a lot ;-)
Thanks Man!👍
Tanks is helping me
Ty man!!
grazie friend!
Thank You !!!!
Спасибо, очень хороший материал.
VALEU! OBRIGADO.
Very helpful Dave wel explained and clearly spoken top job now I can get those crap standard speakers out and new ones in ;)
Which new speakers did you go for?
How about adding some Dynamat inside the door panel?
very clear wonderful video. Any chance you want to show, putting things back together? I can't get door panel to reconnect to top connectors
Спасибо 👍👏👏
Can any one tell me how to remove the inner door handle on the passenger side please ? Mine is loose at the top near the electric window switch so im looking to fix it back on, but cant see any clips or screw holes. Im assuming the fastening must be under the main part of the triangular shaped part of the handle. Any help in how and which way to lever this off would be appreciated thanks or do i need to remove door skin to access the interior door handle
I would suggest, to spray some wd40 on parts that are difficult to remove, as for the plastic rivet for the locker, the easy way to remove it is to remove the central pin first with a knife, then the rivet outer part comes out easy. However my car is a 451 but had no locker screw inside.
Saved me a bunch of money from having the body shop replace my window. Thank you.
I have a 2009 Fortwo 451 and don’t need to remove anything in the hole after the two torx screws for handle.
I need to replace not the door panel, but the front side panel in front of the passenger door.
all that mirror work for the door card
Brill video would have bust loads of stuff if not watched ..Cheers dave
how do i wrap up a door panel in cloth
top
And... how to get it back on?
Great video! But in cold places doesn’t work! Have to warm the plastic before do anything... with the first try it just shattered in undred pieces!!! 😂😂😂
Enjoyed your very informative video. Are you going to post some more Smart Car videos. If you are I will subscribe.
But where is the screw inside the hole? I can’t find it for the life of me🤷🏽♂️
Jt
0u