ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
nice imma make one for my truck
Thanks for the video, it will be my first project.
Making of box is super.
Just what I'm looking for, thank you
nice job congratulation very good thank you for teaching us
هل تستطيع فتح الصندوق القطعة الخلفيه مع الفصاله ملاصقه للهيكل
Good 👍 Kitne Rs... ka h bhai
Cool
Great work, at the seems is side panel sitting on top of bottom then welded or they just touching at the edges? Not sure if I make sense.
Thanks for watching.yes i weld it
On top
Again great work, why is the back part of lid wider than the side and front lips
Just to make it stronger i guess
Because the lid is heavy.dont want it bent when the lid is open
Muy bueno pero deve ser re pesadoooo😮
Excelente
Any chance I could accomplish this with a dc stick welder? If so any suggestions?
Yes u can. Dont weld too long at one spot.
S a@@100seasonsworkshop
What are the dimensions for the sides, bottom, and lid?
30x20 inches.front height 14 inches.rear height is 17 inches.for the lid 32 1/4 x 21 1/4 inches.thanks for watching
Magkno boss pagawa
Can you give me the measurements for all sides?
32x20 inches.front height 14 inches.rear height 17 inches
Thanks my friend
Boss pwede magpagawa
Vuenas noches cuanto mesale una cja de 40 de altura por 30 deancho pero de lamina delgada la qiero para moto
Como se llama ese material
It’s metal
👍👍👍👍👍
No. Velding. Nut. Bolt. Use..
nice imma make one for my truck
Thanks for the video, it will be my first project.
Making of box is super.
Just what I'm looking for, thank you
nice job congratulation very good thank you for teaching us
هل تستطيع فتح الصندوق القطعة الخلفيه مع الفصاله ملاصقه للهيكل
Good 👍
Kitne Rs... ka h bhai
Cool
Great work, at the seems is side panel sitting on top of bottom then welded or they just touching at the edges? Not sure if I make sense.
Thanks for watching.yes i weld it
On top
Again great work, why is the back part of lid wider than the side and front lips
Just to make it stronger i guess
Because the lid is heavy.dont want it bent when the lid is open
Muy bueno pero deve ser re pesadoooo😮
Excelente
Any chance I could accomplish this with a dc stick welder? If so any suggestions?
Yes u can. Dont weld too long at one spot.
S a@@100seasonsworkshop
What are the dimensions for the sides, bottom, and lid?
30x20 inches.front height 14 inches.rear height is 17 inches.for the lid 32 1/4 x 21 1/4 inches.thanks for watching
Magkno boss pagawa
Can you give me the measurements for all sides?
32x20 inches.front height 14 inches.rear height 17 inches
Thanks my friend
Boss pwede magpagawa
Vuenas noches cuanto mesale una cja de 40 de altura por 30 deancho pero de lamina delgada la qiero para moto
Como se llama ese material
It’s metal
👍👍👍👍👍
No. Velding. Nut. Bolt. Use..