Thanks, I replaced the first mount and it helped a lot with my vibration on my 2011 TC. On the next oil change, I'll replace the other two. Only $38 for the three and it fixed my problem. Thanks for the video.
Ah my 2011 just rolled to 125k and has developed this issue...I see this 2012 had 120k or so on the odometer. It's a fleet vehicle so technically I can't work on it myself so I'll have to take it into an authorized shop to do this repair. Thanks for the tip, helps me know what to ask for!
Ah I love it, very true! My biggest irritation (maybe it's just me) I cannot find a rear door unlock button on these things inside the the cab/front seat area. I always have to use the key fob and if the engine is still running, it's always in the ignition and I have to go push the button to open the rear doors. I like to warm it up on the winter while I'm loading stuff into the back of it before taking off...anyway, please tell me I'm dumb and I missed how to do this!
I was looking at a Transit and it had a low speed vibration and didn't buy it. After watching this, maybe I will give the guy another offer. Looks relatively easy to do.
Apparently my APB worked. Glad to see you back in action.Yes I missed your cool calm relaxed personality.Yea right.Anyway I hope to see more of your work.Eric spends to much time playing on his diagnosis toys.I enjoy the nuts and bolts, skinned knuckles and a bit of swearing tossed in for good measure.
I just got a 2013 transit that vibrates like crazy but drives great I’m replacing all the mounts. Mine has almost 300k on the dash and runs better than my 2018 dodge lol
Welcome back, mate. :-) Ford seems to have dropped the ball with their engine mounts. I had a similar problem with the hydraulic mount in an '01 Focus a few years back. Made a god-awful racket, banging away under torque, or just a horrible vibration and rattling when cruising - and it didn't help that I drive manual trans, so it thumped every time I had to shift. What a pain in the arse.
Just sitting here getting a chuckle out of your OCD which all of us mechanics have! LMAO Safety 3rd as Eric O says with the safety glasses on your head! You guys always make your videos entertaining!!
That hood release is a stupid and inconvenient idea somebody got paid way too much money to design! If I hadn't seen this there may have been hammers, extra large prying devises and/or a cutting torch involved.....Just kidding.....maybe. Nice to see you again Will and Thanks for getting this out to us.
I can't believe that Ford still uses that style mount since they are so problematic. The newer Focus uses that style of mount as well as other Ford shitheaps and i must have changed at least dozen of them as well as the torque strut behind the engine at the bottom. They sure do vibrate badly when they fail. The customer thinks that you're amazing when you're done the repair. LoL Well done, Will.
Great video. The Sportster up on the lift caught my attention. Any bike videos coming? Just changed the intake seals on my evo sportster. It was a pain getting the bolts off until I sprang for the special wrench, wish I was good at making my own tools like you.
Hey Will can I have the bad engine mount. There a few girls in town that would love to go for a ride in my friends van with one of those broken. Thanks 😁
I have a 2017 with the same symptoms. It's still under warranty, but the Ford dealer refuses to replace the motor mount. Says it's within specs. It looks like I'll have to pay for and replacement the mount myself. I'll never buy another Ford!
typical ford with 4 popper and dead mount/s :) other lesson, don't bother with aftermarket mounts, they'll either vibrate from the start or fail in a month......
@@lawyerbill68 dose it have a explanation mark in the center of it? I’m pretty sure you are referring to the “low tire pressure” light? Check tire pressures
Yup I noticed this during Editing as well.. was a little late at that point 🤷♂️ shot this with my old go to camcorder... used to be great. Thank you for the feedback.. I’m going to check the settings
Great video. Nice touch putting the camera on the dash while doing the testing to demonstrate exactly how severe that vibration really was.
KCautodoctor thank you 😊 glad it helped. I wasn’t so sure till editing. then thought hmm that was pretty cool lol
Thanks, I replaced the first mount and it helped a lot with my vibration on my 2011 TC. On the next oil change, I'll replace the other two. Only $38 for the three and it fixed my problem. Thanks for the video.
Pretty sure you just lessened my worry about this 2010 I bought...
Lol
Same
Ah my 2011 just rolled to 125k and has developed this issue...I see this 2012 had 120k or so on the odometer. It's a fleet vehicle so technically I can't work on it myself so I'll have to take it into an authorized shop to do this repair. Thanks for the tip, helps me know what to ask for!
Not a difficult job after you get the hood open! 😃 Thanks Will!
James Bruno hahaha 😂that’s sums it up really well!! Your welcome 🤣 thanks for the laughs
been there done that myself. lol.. it says inside how to open the hood.
Ah I love it, very true! My biggest irritation (maybe it's just me) I cannot find a rear door unlock button on these things inside the the cab/front seat area. I always have to use the key fob and if the engine is still running, it's always in the ignition and I have to go push the button to open the rear doors. I like to warm it up on the winter while I'm loading stuff into the back of it before taking off...anyway, please tell me I'm dumb and I missed how to do this!
This worked for me. I replaced this one engine mount, and my TC drives smooth again. Thanks :)
I was looking at a Transit and it had a low speed vibration and didn't buy it. After watching this, maybe I will give the guy another offer. Looks relatively easy to do.
Apparently my APB worked. Glad to see you back in action.Yes I missed your cool calm relaxed personality.Yea right.Anyway I hope to see more of your work.Eric spends to much time playing on his diagnosis toys.I enjoy the nuts and bolts, skinned knuckles and a bit of swearing tossed in for good measure.
Ken thank you!! lol it’s not always roses 🥀 this work can test the best for sure. I’m hoping to keep them rolling!!
I just got a 2013 transit that vibrates like crazy but drives great I’m replacing all the mounts. Mine has almost 300k on the dash and runs better than my 2018 dodge lol
Thanks Will! Glad to see that the shop is coming along well.
TakeCare,
Bill
Excellent diagnosis and repair
Looks like I know what I'm doing tomorrow... good video!!
Welcome back, mate. :-)
Ford seems to have dropped the ball with their engine mounts. I had a similar problem with the hydraulic mount in an '01 Focus a few years back. Made a god-awful racket, banging away under torque, or just a horrible vibration and rattling when cruising - and it didn't help that I drive manual trans, so it thumped every time I had to shift. What a pain in the arse.
nice to see you back sir missed having you around
Just sitting here getting a chuckle out of your OCD which all of us mechanics have! LMAO Safety 3rd as Eric O says with the safety glasses on your head! You guys always make your videos entertaining!!
The design seems a little funky, but it is nice you don't have to replace the whole bracket. Cool hood release.
spelunkerd great seeing you here!!! I agree lol and I’ll admit it took me a minute or two as well getting that hood open 😂 but it’s pretty neat
Will’s back! 😁👍 Not Ford’s finest hour designing that mount. 😁 Good job! Thanks.
Nick Nicu thank you 😊 missed you guys!! Truly appreciate it!
Another fine job Will. Good to see a post from you again.
Wish I could tell you how many of these I changed lol They fail often.
Hundreds for me
OEM or aftermarket ?
@@smms5056 oem only aftermarket will give you vibration
I just bought 5 transits 4 have bad engine mounts LOL
Nice job. Great you're back. Thanks for sharing 👍
long time no see good to see u back
I think my 13 has this issue too while in drive. Not severe yet but now I just need to get all these tools...or borrow... To compete this
Great job mate great find and a lot cheaper than replacing the transmission🤣🤣🤣🤣
Thanks ! That's exactly what mine is doing
Great video. Glad your your back.
MIKE CONT thank you!! I appreciate this
thank for sharing,i see those bearing on the axel on the right side axel go noisy too
Thank you for your hard work
Very well done video,👍👍Now I know what i'm up against!
WARNING WARNING! The hood latch does not compute Will Robinson.
Appreciate your videos. Thanks
Anthony Sova I’m thankful man and your welcome anytime!!
You just got me a deal on a van! It has this problem and apparently the last owner didn't want to deal with it.
That’s awesome 😃💥
That was awesome video thank you.
Where have you been ... nice to see you again :)
That hood release is a stupid and inconvenient idea somebody got paid way too much money to design! If I hadn't seen this there may have been hammers, extra large prying devises and/or a cutting torch involved.....Just kidding.....maybe. Nice to see you again Will and Thanks for getting this out to us.
Its to keep thieves that break your car window, from being able to get to engine bay
Hello, one question, does the steering wheel vibrate?
I can't believe that Ford still uses that style mount since they are so problematic. The newer Focus uses that style of mount as well as other Ford shitheaps and i must have changed at least dozen of them as well as the torque strut behind the engine at the bottom. They sure do vibrate badly when they fail. The customer thinks that you're amazing when you're done the repair. LoL Well done, Will.
What can cause rubbing when turning to the right and left?
About time another video🤣🤣🤣
bodgit and leggit garage hello mate 🙋♂️ great seeing you here. Let’s do some collaboration. Get this show on the road 😉
@@robinsonsauto boom let's do this
lmao... "click click" I love the sound of your torque wrench
Nice to see a new vid. 👍
NIce to see you Will !
Did you use a aftermarket replacement part? Reason I ask is I can't find an OEM Ford part without the complete housing and not just the rubber alone.
Love your videos keep it up 👍🏻
How many mounts transit have? I ve been told that i have same problem by garage.
Ford Transit mounts have been replaced constantly on the van I'm driving. Most recently 3 days ago and it's failing again.
This was exactly my problem with mine. Random vibration I thought was exhaust!
Look who's back! :)
Another quality repair as usual. Transit sounded like it might have an exhaust leak to me...am I hearing things?
Great video. The Sportster up on the lift caught my attention. Any bike videos coming? Just changed the intake seals on my evo sportster. It was a pain getting the bolts off until I sprang for the special wrench, wish I was good at making my own tools like you.
I'm having the same vibration problem but that mount doesn't look anything like the one you pulled off. Could it still be bad or is it another mount?
nice vice the real deal
Absolutely 😉 this guy ☝️ knows good tools when he sees them!! Had this forever! Love it
What about the third motor mount underneath?
Well done
Great job.
Hey Will can I have the bad engine mount. There a few girls in town that would love to go for a ride in my friends van with one of those broken. Thanks 😁
Heeeee's Baaaack.. Thanks for the video.
RJ_Make with hopes for good 😃 I’m feeling the love lol thank you!! Truly means a lot
AWSOME 👍👍 did you use OEM or aftermarket mount?
I'm having the same issue with a 2010 that I just bought. Thank you!
My work van vibrates a lot when I accelerate, we changed a part that is connected to the Axel but it continues to vibrate, can someone help me?
The disassembling & assembling on the bench takes longer than the removal from the engine bay... must be the euro engineering. =)
My wife has a 2010 that had the same issue, we found it when we replaced the engine at 232,000.
Ford reccomends changing the motor mounts every time you change the oil.
I wouldn’t doubt it
@@robinsonsauto literally needs motor mounts again since I posted this comment.
Anyone have the part number ? Is aftermarket or oem
I have a 2017 with the same symptoms. It's still under warranty, but the Ford dealer refuses to replace the motor mount. Says it's within specs. It looks like I'll have to pay for and replacement the mount myself. I'll never buy another Ford!
Pretty simple except for the bending of tabs, not sure why ford would do this, anyway who cares Will is back and I cut loose ford 30 years ago.
Eric Corse I couldn’t agree more!!! Thank you! lol means a lot man
This is what my company vehicle does ugh!
typical ford with 4 popper and dead mount/s :)
other lesson, don't bother with aftermarket mounts, they'll either vibrate from the start or fail in a month......
U been hiding till u lost mad weight lol
☆☆☆☆☆5s thanks for this video.
Nancy Lewis your welcome anytime!!!!
2013 Transit ..same problem. Cost $375 to fix 🤦♂️🤣
Those mounts are Notorious for failing! And they surly let you know lol rattle trap or fix me 🤑😅
@@robinsonsauto now the tire (horseshoe light) came on. Is it the brake or possibly shocks?
@@lawyerbill68 dose it have a explanation mark in the center of it? I’m pretty sure you are referring to the “low tire pressure” light? Check tire pressures
May be my 4k monitor but video was out of focus most of video. Like maybe auto focus was disabled (on manual) good video though.
Yup I noticed this during Editing as well.. was a little late at that point 🤷♂️ shot this with my old go to camcorder... used to be great. Thank you for the feedback.. I’m going to check the settings
Click, click 😂
calibrated elbow lol
☆☆☆☆☆
Victor M Coria thank you
The best way to avoid problems with your ford is to buy a Honda or Toyota.
discoveryman59 😂 I’m pleading the 5th lol
Except you cant get a cargo van from them