www.greenlandmx.eu/en/pro-circuit-r-304-shorty-ktm-sx-250-19-22-hva-tc%2Fte-250%2F300-19-22-gas-gas-ec-250%2F300-21-23-silencer/1151925.html This is the one I got, should fit the 2023 aswell. Mine is a 2023 and had no issues installing it 👍
I would say the sound primarily. Might be some small gains in power but not much. If you want power a full exhaust with another map would be my target, along with porting inlets. Hope this helps 👍
I actually made the design myself and sent this idea to a company called MADE. Just search google for “made stickers motocross” or something like that 👍
does it keep the deep tone to it while giving some crisp? as i had a fmf powercore 2 and it was all crisp no tone. dont mind it being to lound but i want it to be resonable and not give you a headache😂
I got one of these silencers for my ‘22 300xc, tried to put it on today and it would not go on easily. Ended up having to abandon hope and reach back out to the dealer I ordered it from. Did you have any issues getting it to slide over the exhaust pipe part? My FMF 2.1 slides right on but this thing would get stuck about a 1/4 inch from fitting and not budge anymore. Also, the screw holes didn’t even remotely line up. I would have to pull downward on the silencer with a good amount of force to get them to line up. Did you have these issues? Hopeful they somehow sent me the wrong one
Hi! To me this sounds like you got the exhaust for another bike or engine size? I contacted the shop I got it from and asked them to get the new 2023 model pipe for mine, so I dont know if the part numbers are the same as the 2022? However the installation I made was smooth and took roughly 2 minutes. The biggest hustle was to get the rubber seal over both pipes but it wasn't hard. Try to call your dealer and see if they can see if the parts numbers are the same or if there is a difference from the one you've got. Hope this helps! Kind regards, S
Can you link me to the silencer you purchased? Cant find one that says it fits the 23 model
www.greenlandmx.eu/en/pro-circuit-r-304-shorty-ktm-sx-250-19-22-hva-tc%2Fte-250%2F300-19-22-gas-gas-ec-250%2F300-21-23-silencer/1151925.html
This is the one I got, should fit the 2023 aswell. Mine is a 2023 and had no issues installing it 👍
Dream
What is the diference between a normal one and a shorty?
I would say the sound primarily. Might be some small gains in power but not much. If you want power a full exhaust with another map would be my target, along with porting inlets. Hope this helps 👍
where did you get the graphics?
I actually made the design myself and sent this idea to a company called MADE. Just search google for “made stickers motocross” or something like that 👍
does it keep the deep tone to it while giving some crisp? as i had a fmf powercore 2 and it was all crisp no tone. dont mind it being to lound but i want it to be resonable and not give you a headache😂
To me it still got some grunt, it’s loud but not too bad, can absolutely ride it 👍
Did it fit okay. Mine not fitting properly
Yeah no problems! Took like 1min to swap and the fitment was great aswell 👍
@@s.aracing5431 do you have the stock expansion chamber? I have an fmf. Maybe that's why
@@matt2k193 hmm yeah might be, I’m running stock and had no issues with install!
@s.aracing5431 does it sing 🎶
I got one of these silencers for my ‘22 300xc, tried to put it on today and it would not go on easily. Ended up having to abandon hope and reach back out to the dealer I ordered it from. Did you have any issues getting it to slide over the exhaust pipe part? My FMF 2.1 slides right on but this thing would get stuck about a 1/4 inch from fitting and not budge anymore. Also, the screw holes didn’t even remotely line up. I would have to pull downward on the silencer with a good amount of force to get them to line up. Did you have these issues? Hopeful they somehow sent me the wrong one
Hi! To me this sounds like you got the exhaust for another bike or engine size? I contacted the shop I got it from and asked them to get the new 2023 model pipe for mine, so I dont know if the part numbers are the same as the 2022? However the installation I made was smooth and took roughly 2 minutes. The biggest hustle was to get the rubber seal over both pipes but it wasn't hard. Try to call your dealer and see if they can see if the parts numbers are the same or if there is a difference from the one you've got. Hope this helps!
Kind regards, S
Do you need to retune? Any difference in power?
No it runs well, no remarkable gain but a little weight reduction. Changed it mostly for the sound 👍
@@s.aracing5431 i like the sound and its the cheapest option for me
Performance Gain?
I wouldn’t say it’s noticeable tbh, might be something but the main reason was to get a more grumpy sound 👍
vad kör du för däckdimensioner bak och fram?
Kör med 160 bak och 120 fram, båda är 17” 👍