This is a great idea BUT....If you used a stainless steel sanitary blast tube with the quick release flange you could have a valve fitted to the bottom and a smaller inlet valve up top to allow some solvent dwell time to increase the yield. I prefer stainless steel over glass blast tubes, iv seen glass ones shatter and end up in your oil along with it all the material totally destroying the beautiful oil. Also stainless holds the temperature a bit better them glass so you can freeze the whole tube containing the material and it will stay frozen until you start the extraction this helps keep the chlorophyll in the leaf and out of the oils. That's just a suggestion tho it seems to do well enough like it is
I would like to say becouse I've been seeing the question in the comments its recommended that you use 1 can per oz but I use 2 and if your drip is coming out clear THERE COULD STILL BE WAX IN THAT AS WELL so dont trip about the color being clear cuz chances are there is still oil in it
Facts I run a closed loop with a CRC I usually have about 10 pounds of butane run through the system into the collection before I see any color whatsoever
Were is the filter put with in the tube. I see the coffee filter on bottom only filtering the last of what the charcoal filter didn't but its not the only thing that should be filtering. Ether I I'm blind or didn't see it yet because I didn't even come close to watching it all. But it didn't appear that way. I need someone to help me with how to make a steel pipe home made extraction. My oghippie bro, rip,once showed me how to make one but I forgot and he's not with us anymore, rainbow family's calling all brothers that are old-school and organic but brothers needed ready to make dabs but I have to go to home depot to get the parts
Hi Rodger yes we ship to California on a regular basis here's the website you can check out the shipping and prices www.johnnysgreenextractions.ca have a great day
I used to do this around 12 years ago, and once in a while I would have a blow out, how can I avoid blow outs? I did this same process as you. Did I pack my weed too tight the times I had a blow out? Are you using coffee filters at the bottom there?
@@justincredible520 I was thrown in jail for a year had everything seized by cops twice, everything taken from me multiple times, car's seized, I had to start over multiple times. Not that I need to explain any of that to you, but there it is.
I always wondered if a closed system existed, where the butane remains pressurised in a container with the material to soak, a valve could allow it to filter under gravity into a separate collection pan and the butane could then be released through a bleed valve slowly and burned once the filtration is done, this would not only make things safer by eliminating butane in the air, but CO2 is less potent of a greenhouse gas than butane and so it would improve the environmental impact too.
I gamble how come you're not working for NASA your idea is out there and closed loop systems but I think they save the butane instead of dispensing it into the are
@@johnnysgreenextractions8144 My thought was something similar to what you see inside a lighter, except larger with the fill and burn nozzle on top with the top half separated from the bottom with filter. Basically a large lighter with a filter in the middle, the butane would filter through and then as it evaporates off through the second nozzle you can light it like a candle and allow the butane to burn away in a controlled fashion, your oil would be left in the bottom of the container below the filter. This would combine some of the benefits and safety of a closed system with recycler with the simplicity of just pouring butane through it.
@@5688gamble excellent excellent idea you sound very mechanical you should look up this idea if there's nothing out there you should be working on it and then patent keep in touch with us please we love having brain power on our Channel like yours
Hi Scott One trick to making a hard shatter is to dry your cannabis as much as possible. If you have a dehydrator use it. Freshness is also a key factor. If you were to make diamonds then you would run your cannabis freshly cut. Get back to us if you need any help.
Whatever the grow store has it the time sometimes London. Puratane I think that one is a percentage your propane and then we've also used culinary butane that is used for heating food
It all depends how you packet if you pack it solid they'll be enough pressure where it could blow off the end of the glass there's always quite a bit of pressure you should pack your tube with the consistency of your weed as if you were to roll a joint
@@ricardoperez5504 We can make special arrangements You would have to go back johnnysgreenextractions.ca go to the bottom of the page where the EMail is and discuss it there . Peace
Man I really wish this was available here in the State's now Johnny! Especially since its becoming legal in many states like here in Massachusetts. There's so many shit ass products being sold at top dollar to the clueless consumer.
Hi Busted WE will ship privately and discreetly to the USA but we can not be responsibly If customs snags the product. Anyone can go the website and set it up through Johnnys Green Extractions website E-Mail Thanks for the great comment we appreciate that Busted
Oklahoma is learning we are slowly but surely all learning Some spend millons I'm pinching Penny's 90% the grower 10% the equipment! I'm using a 90g tripod closed column bho setup Any tips on temps when cooling or while purging? Keep the knowledge coming always appreciated!! Stay safe stay legal Stay growing!
@@chasestevens3279 purge times and temps depend on the viscosity of the oil. 88°f-104° Tops only pull vacuum to around around half vac don't ever purge on full vac
Hi Simon we do do deliveries to Australia because shipping is expensive most people decide to go with boat travel instead of air mail this can take up to 2 months you can always go to the website place an order and you'll be able to see what your shipping will be without paying for it www.johnnysgreenextractions.ca if you have any questions please get back to us and have a great day
@@johnnysgreenextractions8144 thank you very much, and especially for putting this link ✌️ I've got it in the shopping cart and linked the site to my home page,🙂 You'll definitely hear from me
your video is great johnny, i want to ask instead of using the “honey oil” to mix with kief for old school hash, can i press rosin and using that ? its just much easier and safer , please let me know your thoughts
@@bakedbeard4203 You built it and gave it away all in one day. I call BS on that one. Why are you so persistent on hassling these guy"s. There a couple of CANADIAN guy"s starting a new small company and your slamming there patent product. I bet you have never used it or a closed loop. If you want to be annoying go bug some CHINA company or politician that has ripped you off. These guy"s have helped the weed community for many decades especially med growers in CANADA that now start the time of there med grow when there licences arrive to there house instead of when they applied which wasted 4 months in the year. Let these guys do there business they are friendly educational and respect safety for bho ers. They provide a product for working joe"s that cant afford a closed loop rosin press co2 etc. Troll some where else.
elvis pelvis I’m an engineer and fabricator by trade . If I built it again it would take half the day and what you call harassment I call getting tired of seeing guys jump on the green rush band wagon acting like they reinvented the wheel. Anything else ?
I think it would we have experimented with blasting certain herbs from the garden if you go to the playlist on the channel and check out Leisure I think we have a couple videos that show this
I have a question I'd like to ask you, it seems like you really know what you're doing and I love your videos. I can't seem to get the butane in my tubewell enough using the plastic tips they come on the bottle. I don't have a system like you I have an open-blast ablaze 190 g system and a one and a half gallon tank. If you could help me with this I would really appreciate, thanks!
This is not a machine , the idea of this is taken from how a caulk sealant gun works and I’ve seen it done before . If you’re the Slightest bit mechanically inclined you can make your own at home.
That requires work and today's stoners have no time for that I can remember making bongs from fruit and vegetables and pipes outta chicken and beef bones
@@bakedbeard4203 all ican say is that if us old-school potheads are complaining about them being lazy there's definitely a problem cuz for years we was always the lazy ones
@@bakedbeard4203 I have also evolved guess dabs make you lazier then flower I'm all for playing MacGyver but it's gonna be from the sofa or my lazy boy lmmfao
Awesome I greatly appreciate it! Btw just used the green machine on fresh frozen trim and it worked greattt! Excited to move onto some fresh frozen nug run have a good day 🤙
Hi Ed there is now a new model that now accommodates 12 inch 18 in and 24 in extraction tubes here is the website www.johnnysgreenextractions.ca get back to us anytime you have any questions
Is it worth it to make though is my question. I can get it 20$ a gram from the dispensary. Is it worth it vs lost flower and time. If you just use trim then I get it, but even the butane costs 20-30$ If I want corn I buy it at the store for a dollar. Growing it for 6 months ain't worth my time. So is it worth it and actually profitable for your time.. or just hit the shelf?
Hey Nelson that is such a fair comment and I understand where you're coming from we live in Canada and a lot of people get shatter delivered right to their door through the mail any product that I have tried through this method does not ever compared to the shatter that we make either in strength or taste for $30 worth of butane I could probably end up with roughly50 grams of shatter you are also forced into learning a little bit about chemistry and science it's also about personality I could have bought blueberries at the grocery store today but I chose to grab the wife and go to the forest and pick our own blueberries which are healthier and better in taste it relates to the shatter when you purchase it you really don't know how long someone has purged their product we know ours is Purge properly and not toxic for ourselves
Hi Scot There is no set amount. When you first start to blast you will see the juice that is coming thru the filter will have a yellow tinge to it. You have to keep using butane till it starts to come out clear.
What makes you think we haven't done rosin. We do all types of concentrates some genetics don't work well with rosin like Gorilla Glue for example and it's not the best out there. THC diamonds and terp sauce blows away any rosin
Hi NewGun. It is different with all herbs because of thc content; bud or shake etc. When your liquid first starts to drop into the collection bowl it will be yellow coming out of extraction tube. You want to keep spraying till it starts to come out clear from tour extraction tube. Check out bho extraction the safe and easy way part 2 and 3 it goes into more detail. If you have any more questions we are happy to answer. Extract safely and happy holidays from everyone at Johnnys. Peace.
Hi DirtyGlove The complete kit 18" is $260.00 CANADIAN DOLLARS and includes 1- Green Machine 1 set of 6" legs / 1 set of 10" legs, 1-18 " extraction tube, 1- butterfly clamp, 1- dab container, filters 1- 8x8 slick pad dish plus an extra extraction tube. Shipping comes with a tracking number and is usually about five days to US and less for Canada www.johnnysgreenextractions.ca
It's a cool System and very very Safe nice and perfect System it's good work.I press rosin with a 10tons or 2.5tons rosinpress i press very strong rosin from flower kief oldschool hash blackhash or budder and and and i love isolate it's very strong or thca cristall i love dabbing cheers johnny
Hi The weight all depends on the bud quality and resin content. A rough average is about 3.5 grams If you use quality bud your shatter will be strong and tasty. We live in Canada and you can get cheap shatter for $ 30.00 It is made from cuttings and scrap. I can smoke 4 to 5 hits were as if I make top notch shatter I only need 1 hit. And of course you always pay more for anything that is better.
Please avoid saying crap, no the glass tube is not under pressure during the extraction, it's open at the bottom to let the liquid gas pass so how can it be under pressure ?
Hi Benjamin you can purchase the green machine on the website www.johnnysgreenextractions.ca the cost is $150.00 CANADIAN roughly $118.00 AMERICAN. We will be happy to answer any questions.
Follow simple rules & do it out doors & u'll be fine. This is not rocket science man!! Fuckin ametures I've litterly done hundreds & hundreds of extractions with no problems. Don't be a dumb ass!!
Jason Gladfelter haha true ! So simple .. people make mistakes because they are Fucking high man ! We always WORK FIRST AND CHILL AFTER ! Thats mine rule
its 2018 dude open blasting shouldent be a thing but it is still. go grab a closed loop that can run this qp or hp what ever for 400-800 bucks save your gas and your life. cls is cheap these days your saving money and your safety. easy to run and more control. no exuses been running a cls for 6 years and never looked back except to laugh
Leaky incendiary devices are not safe, and in Canada it's a $50,000 fine. Critical co2 is simple and easy to make, and a hell of a lot safer. And you get no frost either. no pumps,needed, just a reaction tank, old scuba will do and a collection vessel. Plus this oil isn't great compared to the co2 either. Butane is not good for the air, the co2 is recaptured and reused. Not saying I haven't done this, similar way too since I didn't want to stand next to it! But co2 puts fires out and that makes me feel better.
Hi Drampa CO2 shatter is a great product here's my thoughts many consider butane extraction to be scientifically Superior compared to CO2 methods I am one of them as I have done comparisons many times BHO extraction typically has less post processing requirements than a CO2 extracted oil you will also get a better terpene profile with hydrocarbons such as butane as far as the law in Canada you can order shatter or other concentrates from dozens of sites and have your concentrate delivered right to your house apartments Etc these laws are not enforced whatsoever a lot of CO2 extractions are also used for vape pens a lot of CO2 units use a high-pressure forum of carbon dioxide as a solvent this Advanced extraction technique means you will need professional equipment and training to ensure the safety of the operation we have friends that have spent over a hundred grand for their CO2 equipment that lets them pump out the quantity it produces a nice shatter but no better than a hydrocarbon extraction done with the green machine the green machine is for small-scale and craft cannabis Growers the butane that escapes into the atmosphere would be a lot less than even you cutting your lawn taking the bus or driving your car as far as a carbon footprint interesting topic like your comment respect it you have yourself a wonderful day
Hi Joe. Check our trilogy on our channel bho extraction the safe and easy way. We do the whole process with explanation. The website www.johnnysgreenextraction also covers the safety of making your own bho. Peace.
@@masterblaster3514 man I want to hang out for a day with you guys, thanks for the awesome videos, I did checkout some of the other videos, I can't belive people would do this inside! The way she goes
Hi @@jmzthree Wow thank you for your comment and interest. I will be happy to answer any questions anytime. Peace. PS come down for a day if you are ever out this way, weed is legal now in CANADA
That sure makes the whole process easy. If I could handle smoking shatter I’d consider buying a machine.... hmmm maybe I could use the shatter for edibles?? Have to save some pennies and order one but I don’t have anyway to purge the shatter. Great video as always. Master Blaster you rock so does your partner. Peace ✌🏻 from HillbillySteve
The safe and easy way for sure! lololol I've seen the dangerous and hard way, blew the roof completely off as small house. The dude is lucky to be alive
He was making wax inside and it filled his guest house full of butane. The TV ignited it off and it blew the roof off and windows out. 10 cans of butane packs a powerful punch
Found a way to do it without vacuum extraction: Let most of the butane evaporate, then add any non toxic, pure alcohol. Tha butane won't readily evaporate from sticky hash oil, but it will escape from an alcohol solution. Then you let that dry out, any remaining alcohol burns to water and co2 when used.
Ah, and also you don't need a blast tube or anything, just an below 0°C outdoors environment. I just used a glass jar with weed in it, added lighter fluid, let it sit for 20 min, stir if u have time, put through sieve.
What's the point of the green machine when you can just buy a steel gasket tube with a stand that's compatible as closed loop The actual safe way to do bho is closed loop. No need for this device it's breakable and a metal version exists with a pressure valve so you can just pressure your material let it stew a few seconds of you wish before letting it expell and it also has gaskets where you can put actual lab grade micron filters in order to produce to best product.. Closed loop systems all have steel columns with gaskets for filters and valves to let your blast out if it's not being used in part of a closer loop set up . So it's essentially a stand like that but better . Abd there's tons of them and your column can be extended at any time . I don't see the point of this product also you can buy one for less then this. Also I'd use parchment paper box instead of a Pyrex. 0 scraping. Amateurs
Nonit don't if that was true u never have a plant with the either with lights or sun. Smart dick you forgot that uv kills it. But need uv to be able to create THC. Simple.fuckn science man.
This is a great idea BUT....If you used a stainless steel sanitary blast tube with the quick release flange you could have a valve fitted to the bottom and a smaller inlet valve up top to allow some solvent dwell time to increase the yield. I prefer stainless steel over glass blast tubes, iv seen glass ones shatter and end up in your oil along with it all the material totally destroying the beautiful oil. Also stainless holds the temperature a bit better them glass so you can freeze the whole tube containing the material and it will stay frozen until you start the extraction this helps keep the chlorophyll in the leaf and out of the oils. That's just a suggestion tho it seems to do well enough like it is
Stainless is the way to go. Very affordable now days as well Best Value Vacs got some nice ones for the low
@@mikehikes710 do you think a closed Column pressurised stainless steal is a good idea?
I’m “outside outside outside”
On patio Enjoying this video ha ha Ha
I would like to say becouse I've been seeing the question in the comments its recommended that you use 1 can per oz but I use 2 and if your drip is coming out clear THERE COULD STILL BE WAX IN THAT AS WELL so dont trip about the color being clear cuz chances are there is still oil in it
Facts I run a closed loop with a CRC I usually have about 10 pounds of butane run through the system into the collection before I see any color whatsoever
Good job. It works great. Love the pen too🤘💨
Were is the filter put with in the tube. I see the coffee filter on bottom only filtering the last of what the charcoal filter didn't but its not the only thing that should be filtering. Ether I
I'm blind or didn't see it yet because I didn't even come close to watching it all. But it didn't appear that way. I need someone to help me with how to make a steel pipe home made extraction. My oghippie bro, rip,once showed me how to make one but I forgot and he's not with us anymore, rainbow family's calling all brothers that are old-school and organic but brothers needed ready to make dabs but I have to go to home depot to get the parts
So I use it inside? 🤔
How many coffee filters do you use? I always use two and seem to have oil leftover in the tube afterwards
We also use two in a lot of cases
Small bubble bag around the glass tube. Then you can hold it and the micron screen is better.
How much butane was that in each can
Ok so now at least I know why all the butane is always sold out at my local mart when I’m needing to refill my lighter lmao 😂
What tane do you use
What's the Name of the gas?
There are cool, I wish they made ones for an ounce or less of starting material.
Much love from Vegas!
Hey desert dog that's coming up in the very near future hello Vegas
How much is the green machine and will you ship it to California
Hi Rodger yes we ship to California on a regular basis here's the website you can check out the shipping and prices www.johnnysgreenextractions.ca have a great day
י
Hey bro what the size for your screen micron ?? At the and of the tube
Use 110 to 160 Micron or substitute with 2 coffee filters
I used to do this around 12 years ago, and once in a while I would have a blow out, how can I avoid blow outs? I did this same process as you. Did I pack my weed too tight the times I had a blow out? Are you using coffee filters at the bottom there?
Don’t pack it too tightly. Use the metal screen on the bottom on top of the coffee filters.
@@justincredible520 umm yeah, that's why I asked the question? Pretty self explanatory...
@@justincredible520 I was thrown in jail for a year had everything seized by cops twice, everything taken from me multiple times, car's seized, I had to start over multiple times. Not that I need to explain any of that to you, but there it is.
This is pretty awesome video!!
I'm not supposed to do it in my garage next to the water heater as close to the pilot light
No shit
How far dose the gas spread
I always wondered if a closed system existed, where the butane remains pressurised in a container with the material to soak, a valve could allow it to filter under gravity into a separate collection pan and the butane could then be released through a bleed valve slowly and burned once the filtration is done, this would not only make things safer by eliminating butane in the air, but CO2 is less potent of a greenhouse gas than butane and so it would improve the environmental impact too.
I gamble how come you're not working for NASA your idea is out there and closed loop systems but I think they save the butane instead of dispensing it into the are
@@johnnysgreenextractions8144 My thought was something similar to what you see inside a lighter, except larger with the fill and burn nozzle on top with the top half separated from the bottom with filter. Basically a large lighter with a filter in the middle, the butane would filter through and then as it evaporates off through the second nozzle you can light it like a candle and allow the butane to burn away in a controlled fashion, your oil would be left in the bottom of the container below the filter. This would combine some of the benefits and safety of a closed system with recycler with the simplicity of just pouring butane through it.
@@5688gamble excellent excellent idea you sound very mechanical you should look up this idea if there's nothing out there you should be working on it and then patent keep in touch with us please we love having brain power on our Channel like yours
Commercial BHO equipment recycles liquid CO2 in that manner.
@@halharris8663butane. Not co2
Guess I’m going to purchase the purge machine too. Tx for making it affordable✊I need my meds clean!! Tx gain Jhon💨👍
I personally think it could be a little cheaper
you say its pressurized but is it really its got a huge hole on the bottom of it dont get me wrong its dangerous asf still
You could never believe this guy is a stoner until you watch him blast three cans through a qp of dry af big buds.
Ladies and gentlemen I will separate the first Pyrex tray and call that tier one
in extractions on 6'' tubes do you recommend to use the hole bottle of gas or just until it start to came out clear?
Hi anthony just till it comes out clear
HI how you doing was wounding,do you have to wait for my trim to be completely dry before I run it, or can i run it wet??? for shatter thaks.
Hi Scott One trick to making a hard shatter is to dry your cannabis as much as possible. If you have a dehydrator use it. Freshness is also a key factor. If you were to make diamonds then you would run your cannabis freshly cut. Get back to us if you need any help.
Hey thanks man.@@johnnysgreenextractions8144
What kinda Butain did you use
Whatever the grow store has it the time sometimes London. Puratane I think that one is a percentage your propane and then we've also used culinary butane that is used for heating food
I got power lines over my yard is this a issue 😕 😒
Whats pressure is it at? I doubt its "extreme"
It all depends how you packet if you pack it solid they'll be enough pressure where it could blow off the end of the glass there's always quite a bit of pressure you should pack your tube with the consistency of your weed as if you were to roll a joint
@@johnnysgreenextractions8144 is more pressure better? Just curious
Incredible!
Jonny love your videos need tube I'm in Toronto Canada
Hey Antonio here's the website www.johnnysgreenextractions.ca
Where do I get this??
www.johnnysgreenextractions.ca
make one from a caulking gun.
Does anyone have a link to where I could buy this?
Hi Otf Breezy www.johhnysgreenextractions.ca the prices are in Canadian dollars
johnnys green extractions hey thanks man. Finna order one Friday. That wax you made looks fire tho
@@otfbreezy1356 If you need any help or info get back to us
wouldnt it be easier to extract it into a non stick pan, like teflon? So its easier to scrape out?
Hi James nothing wrong with the silicone pads we sell them with our complete green machine kits thanks for stopping by
Link to the site for purchase plz!?
Hi ricardo www.johnnysgreenextractions.ca
Nvm yall dnt deliver in texas 😭😭
@@ricardoperez5504 We can make special arrangements You would have to go back johnnysgreenextractions.ca go to the bottom of the page where the EMail is and discuss it there . Peace
@@ricardoperez5504 check amazon for extraction tubes
Man I really wish this was available here in the State's now Johnny! Especially since its becoming legal in many states like here in Massachusetts. There's so many shit ass products being sold at top dollar to the clueless consumer.
Hi Busted WE will ship privately and discreetly to the USA but we can not be responsibly If customs snags the product. Anyone can go the website and set it up through Johnnys Green Extractions website E-Mail Thanks for the great comment we appreciate that Busted
Oklahoma is learning we are slowly but surely all learning
Some spend millons
I'm pinching Penny's 90% the grower 10% the equipment!
I'm using a 90g tripod closed column bho setup
Any tips on temps when cooling or while purging?
Keep the knowledge coming always appreciated!!
Stay safe stay legal Stay growing!
@@chasestevens3279 purge times and temps depend on the viscosity of the oil. 88°f-104° Tops only pull vacuum to around around half vac don't ever purge on full vac
@@mikehikes710 half vac eh? does this help to keep some terps?
I love this, do you sell them?
If so can you get them through Australian customs?
We're totally illegal for anything cannabis
Hi Simon we do do deliveries to Australia because shipping is expensive most people decide to go with boat travel instead of air mail this can take up to 2 months you can always go to the website place an order and you'll be able to see what your shipping will be without paying for it www.johnnysgreenextractions.ca if you have any questions please get back to us and have a great day
@@johnnysgreenextractions8144 thank you very much, and especially for putting this link ✌️
I've got it in the shopping cart and linked the site to my home page,🙂
You'll definitely hear from me
your video is great johnny, i want to ask instead of using the “honey oil” to mix with kief for old school hash, can i press rosin and using that ?
its just much easier and safer , please let me know your thoughts
I think it would work as long as your rosin is liquefied enough to do the mixture
what size butane cans do you use it looks like a 420ml can but I'm not sure.
I think that's what it is off hand but the green machine automatically adjust 4 different size butane cans
@@johnnysgreenextractions8144 okay thank you I plan on getting your green machine soon
Replicated this in one day with one trip to the hardware store .
Cmon I bet it took you two trips to the hardware store.
elvis pelvis lol nah and I gave it away . It’s 2018 use a closed loop system.
@@bakedbeard4203 You built it and gave it away all in one day. I call BS on that one. Why are you so persistent on hassling these guy"s. There a couple of CANADIAN guy"s starting a new small company and your slamming there patent product. I bet you have never used it or a closed loop. If you want to be annoying go bug some CHINA company or politician that has ripped you off. These guy"s have helped the weed community for many decades especially med growers in CANADA that now start the time of there med grow when there licences arrive to there house instead of when they applied which wasted 4 months in the year. Let these guys do there business they are friendly educational and respect safety for bho ers. They provide a product for working joe"s that cant afford a closed loop rosin press co2 etc. Troll some where else.
elvis pelvis I’m an engineer and fabricator by trade . If I built it again it would take half the day and what you call harassment I call getting tired of seeing guys jump on the green rush band wagon acting like they reinvented the wheel. Anything else ?
Troll
would this work with chilies
I think it would we have experimented with blasting certain herbs from the garden if you go to the playlist on the channel and check out Leisure I think we have a couple videos that show this
I have a question I'd like to ask you, it seems like you really know what you're doing and I love your videos. I can't seem to get the butane in my tubewell enough using the plastic tips they come on the bottle. I don't have a system like you I have an open-blast ablaze 190 g system and a one and a half gallon tank. If you could help me with this I would really appreciate, thanks!
This is not a machine , the idea of this is taken from how a caulk sealant gun works and I’ve seen it done before . If you’re the Slightest bit mechanically inclined you can make your own at home.
That requires work and today's stoners have no time for that I can remember making bongs from fruit and vegetables and pipes outta chicken and beef bones
Noah Donaldson then Idk what this world is coming to other then a bunch of lazy fucks dragging the rest of us down . Lol
@@bakedbeard4203 all ican say is that if us old-school potheads are complaining about them being lazy there's definitely a problem cuz for years we was always the lazy ones
Noah Donaldson well then speak for yourself . I’m a old school pot head and I’ve never been lazy . I evolve with technology .
@@bakedbeard4203 I have also evolved guess dabs make you lazier then flower I'm all for playing MacGyver but it's gonna be from the sofa or my lazy boy lmmfao
Can you do fresh frozen bud in it?
Yes check out our fresh frozen shatter video
Awesome I greatly appreciate it! Btw just used the green machine on fresh frozen trim and it worked greattt! Excited to move onto some fresh frozen nug run have a good day 🤙
Hope the metal on the top doesn't spark. Hope it's not metal
Is there a link to the same machine you're using?
Hi Ed there is now a new model that now accommodates 12 inch 18 in and 24 in extraction tubes here is the website www.johnnysgreenextractions.ca get back to us anytime you have any questions
Get back asap
Is it worth it to make though is my question.
I can get it 20$ a gram from the dispensary. Is it worth it vs lost flower and time.
If you just use trim then I get it, but even the butane costs 20-30$
If I want corn I buy it at the store for a dollar.
Growing it for 6 months ain't worth my time.
So is it worth it and actually profitable for your time.. or just hit the shelf?
Hey Nelson that is such a fair comment and I understand where you're coming from we live in Canada and a lot of people get shatter delivered right to their door through the mail any product that I have tried through this method does not ever compared to the shatter that we make either in strength or taste for $30 worth of butane I could probably end up with roughly50 grams of shatter you are also forced into learning a little bit about chemistry and science it's also about personality I could have bought blueberries at the grocery store today but I chose to grab the wife and go to the forest and pick our own blueberries which are healthier and better in taste it relates to the shatter when you purchase it you really don't know how long someone has purged their product we know ours is Purge properly and not toxic for ourselves
OUTSIDE!
You get better yield if you use a 90 Micron screen
I was wondering how many cans to run per ounce,thanks
Hi Scot There is no set amount. When you first start to blast you will see the juice that is coming thru the filter will have a yellow tinge to it. You have to keep using butane till it starts to come out clear.
Hi, I usually run one can per ounce
This making me sick to my stomach someone get this guy some cold press rosin
What makes you think we haven't done rosin. We do all types of concentrates some genetics don't work well with rosin like Gorilla Glue for example and it's not the best out there. THC diamonds and terp sauce blows away any rosin
Where do I buy one
www.johnnysgreenextractions.ca
Where can I buy this set up ?? Must have it for sure
Hi Igniter. Go to www.johnnysgreenextractions.ca or E bay under green machine isobutane dispenser
How do you know how much butane to use? I just ordered a 6" extractor. Supposedly holds 45gs. how much would i use? THANKS!
Hi NewGun. It is different with all herbs because of thc content; bud or shake etc. When your liquid first starts to drop into the collection bowl it will be yellow coming out of extraction tube. You want to keep spraying till it starts to come out clear from tour extraction tube. Check out bho extraction the safe and easy way part 2 and 3 it goes into more detail. If you have any more questions we are happy to answer. Extract safely and happy holidays from everyone at Johnnys. Peace.
Ok, thanks! new to all this, just looking for new ways to medicate. This intrigues me
Where do i get this extractor from?
www.johnnysgreenextractions.ca
Saul Goodman?
This kind of shit should be illegal, go get a closed loop
Why outside though
How does shipping work
And cost? For the 18 inch? Trying to order tonight and how long would it take
Hi DirtyGlove The complete kit 18" is $260.00 CANADIAN DOLLARS and includes 1- Green Machine 1 set of 6" legs / 1 set of 10" legs, 1-18 " extraction tube, 1- butterfly clamp, 1- dab container, filters 1- 8x8 slick pad dish plus an extra extraction tube. Shipping comes with a tracking number and is usually about five days to US and less for Canada www.johnnysgreenextractions.ca
It's a cool System and very very Safe nice and perfect System it's good work.I press rosin with a 10tons or 2.5tons rosinpress i press very strong rosin from flower kief oldschool hash blackhash or budder and and and i love isolate it's very strong or thca cristall i love dabbing cheers johnny
Man that stuff is so tasty and strong we love it also
Such a great idea!
Ok. I’m curious. How much does it cost to do an oz, and how much extract do you average, and what’s the retail price per gram when done?
Hi The weight all depends on the bud quality and resin content. A rough average is about 3.5 grams If you use quality bud your shatter will be strong and tasty. We live in Canada and you can get cheap shatter for $ 30.00 It is made from cuttings and scrap. I can smoke 4 to 5 hits were as if I make top notch shatter I only need 1 hit. And of course you always pay more for anything that is better.
Is this a joke?
Please avoid saying crap, no the glass tube is not under pressure during the extraction, it's open at the bottom to let the liquid gas pass so how can it be under pressure ?
Anyone know the yield of something like this ?
Hi H R You usually get about 3 grams per ounce
Where can I purchase one of these? And can you ship to Australia 🤙
Hi Lee. Go to www.johnnysgreenextractions.ca then go to the bottom of the page for an email address to talk to johnny about your location
Where bout in Aussie you lad you gonna make this shit if you did let us know how it turned out
How to evaporate liquid Butane;let it sit there.
Hey Dawn there's a little more to it than that check up BHO extraction safe and Easy Way Part 2 in part 3 we do a taste test
where do I buy the green machine???
Hi Benjamin you can purchase the green machine on the website www.johnnysgreenextractions.ca the cost is $150.00 CANADIAN roughly $118.00 AMERICAN. We will be happy to answer any questions.
master blaster do you ship to Europe ??
Mason jar works way better look it up saves lots of butane too
you are still holding a bomb in your hands, being away from the extraction area is crucial.
Follow simple rules & do it out doors & u'll be fine. This is not rocket science man!! Fuckin ametures I've litterly done hundreds & hundreds of extractions with no problems. Don't be a dumb ass!!
Jason Gladfelter haha true ! So simple .. people make mistakes because they are Fucking high man ! We always WORK FIRST AND CHILL AFTER ! Thats mine rule
Beauty
its 2018 dude open blasting shouldent be a thing but it is still. go grab a closed loop that can run this qp or hp what ever for 400-800 bucks save your gas and your life. cls is cheap these days your saving money and your safety. easy to run and more control. no exuses been running a cls for 6 years and never looked back except to laugh
Alex Lopez how to look 4 it?
Huh?
What gas is in this?
Butane. same as filling a butane lighter
johnnys green extractions Thank you!
@@jiro2521 No worries get back to us if you ever have any questions
Leaky incendiary devices are not safe, and in Canada it's a $50,000 fine. Critical co2 is simple and easy to make, and a hell of a lot safer. And you get no frost either. no pumps,needed, just a reaction tank, old scuba will do and a collection vessel. Plus this oil isn't great compared to the co2 either. Butane is not good for the air, the co2 is recaptured and reused. Not saying I haven't done this, similar way too since I didn't want to stand next to it! But co2 puts fires out and that makes me feel better.
Hi Drampa CO2 shatter is a great product here's my thoughts many consider butane extraction to be scientifically Superior compared to CO2 methods I am one of them as I have done comparisons many times BHO extraction typically has less post processing requirements than a CO2 extracted oil you will also get a better terpene profile with hydrocarbons such as butane as far as the law in Canada you can order shatter or other concentrates from dozens of sites and have your concentrate delivered right to your house apartments Etc these laws are not enforced whatsoever a lot of CO2 extractions are also used for vape pens a lot of CO2 units use a high-pressure forum of carbon dioxide as a solvent this Advanced extraction technique means you will need professional equipment and training to ensure the safety of the operation we have friends that have spent over a hundred grand for their CO2 equipment that lets them pump out the quantity it produces a nice shatter but no better than a hydrocarbon extraction done with the green machine the green machine is for small-scale and craft cannabis Growers the butane that escapes into the atmosphere would be a lot less than even you cutting your lawn taking the bus or driving your car as far as a carbon footprint interesting topic like your comment respect it you have yourself a wonderful day
awesome
Why can't you do it inside?
Hi Joe. Check our trilogy on our channel bho extraction the safe and easy way. We do the whole process with explanation. The website www.johnnysgreenextraction also covers the safety of making your own bho. Peace.
Because butane go boom, guy.
@@masterblaster3514 man I want to hang out for a day with you guys, thanks for the awesome videos, I did checkout some of the other videos, I can't belive people would do this inside! The way she goes
@@jibblesq big boom go big boom
Hi @@jmzthree Wow thank you for your comment and interest. I will be happy to answer any questions anytime. Peace. PS come down for a day if you are ever out this way, weed is legal now in CANADA
Who the hell came up with this method?
That sure makes the whole process easy. If I could handle smoking shatter I’d consider buying a machine.... hmmm maybe I could use the shatter for edibles??
Have to save some pennies and order one but I don’t have anyway to purge the shatter.
Great video as always. Master Blaster you rock so does your partner.
Peace ✌🏻 from HillbillySteve
🚭
Omg ce pasa
Ten un día maravilloso y mantente saludable
I’m sick to my stomach rn
The safe and easy way for sure! lololol I've seen the dangerous and hard way, blew the roof completely off as small house. The dude is lucky to be alive
Rabbit what’d he do?
He was making wax inside and it filled his guest house full of butane. The TV ignited it off and it blew the roof off and windows out. 10 cans of butane packs a powerful punch
dont ever consider doing this indoors... it WILL blow up I guarantee it
Done it tons of times and your friend is a fucking moron with a low IQ
Never blew up once. I hate hillbillies
Found a way to do it without vacuum extraction:
Let most of the butane evaporate, then add any non toxic, pure alcohol.
Tha butane won't readily evaporate from sticky hash oil, but it will escape from an alcohol solution.
Then you let that dry out, any remaining alcohol burns to water and co2 when used.
Ah, and also you don't need a blast tube or anything, just an below 0°C outdoors environment.
I just used a glass jar with weed in it, added lighter fluid, let it sit for 20 min, stir if u have time, put through sieve.
I Know You Hear Me Knocking at the door
Plippo If that is you brother you are welcome anytime
definitely a safer way to open blast i want one
Try www.johnnysgreenextractions.ca
🍀....
Hey Luke
@@johnnysgreenextractions8144 hey.
What's the point of the green machine when you can just buy a steel gasket tube with a stand that's compatible as closed loop The actual safe way to do bho is closed loop. No need for this device it's breakable and a metal version exists with a pressure valve so you can just pressure your material let it stew a few seconds of you wish before letting it expell and it also has gaskets where you can put actual lab grade micron filters in order to produce to best product.. Closed loop systems all have steel columns with gaskets for filters and valves to let your blast out if it's not being used in part of a closer loop set up . So it's essentially a stand like that but better . Abd there's tons of them and your column can be extended at any time . I don't see the point of this product also you can buy one for less then this. Also I'd use parchment paper box instead of a Pyrex. 0 scraping. Amateurs
Where can you buy that?
Looks very dangerous and I wud run away from it to lol lol boom boom
Bad idea to use butane! Hazard
Wood Woman ya but it gets cooked out so there is no butane left u need to watch all his videos its safe
Bho is for mass production
Ummmm. Sunlight breaks down the THC. FAIL!
So does air
Nonit don't if that was true u never have a plant with the either with lights or sun. Smart dick you forgot that uv kills it. But need uv to be able to create THC.
Simple.fuckn science man.
Never open blast lol