Hydroponics is Art, we do support all kinds of material supplies with best quality. If you are interested please check it out th-cam.com/channels/2YoTym4oFDVZdSwJDo-3Pw.html
Good morning Petani please to meet you I'm Jarrod. Keep up the amazing work, your creative inventions and sustainability is unbelievable. Your a legend I cant take the smile off my face. I am going to attempt to build my own today. I will send you some pictures. Don't stop uploading take care my friend.
If you were just doing this once, as much of a headache as it seems, you could say 'okay', but if I were making several of these, I'd just make a jig; that would make the process much quicker.
Love it. Only thing that stops me from building my own system is the use of PVC what isn't resistant to UV-light as well as ecologically harmless. I searched for PP-pipes that are less problematic but even this material emites its particles when exposed to sunlight. I realized that conventinal gardening might be the most harmless and environtment friendly way to grow greens. It's kind of ironic that we use so many plastics in our daily life of which we cannot make sure they're harmless. Anyway I hope I will find a material in the near future which I can use without any doubts to copy this system. Thanks for sharing!
@@wilhelmmatthies5921 I fully agree. We just get drinking water in glass bottles and try to reduce everything that wastes our nutrition that's why on the other hand it must be kind of ironic to grow our plants in plastic.
Some silicone tends to come lose from plactics while in contact with water, most of them are made for more rigid materials such as glass or tiles. I would also pvc weld the pipes and fittings which must hold the fluid and friction fit the rest. You could also wrap PTFE Teflon tape around the fitting that you want to to friction fit, this gives you a waterproof seal that you could still take apart
Is that a slow-setting PVC glue? Most of what's available sets up in a couple of seconds so you have to have everything alligned properly from the start.
what schedule (thickness) 4 inch PVC pipe are you using ? here in the US, we have sch 20 (light duty/drain), sch 30 (light duty/drain) sch 40 (medium duty/potable water and/or sewer), sch 80 (heavy duty). your system is very nicely done !
Good luck on your build. I did aquaponic s for about 10 years . All the dwv piping is thinner but cheaper. Can’t use no medals but stainless steel because it will leak the medal into the water. Again , good luck on your build. Just add some light and sand down the top pipe so can spin the tower so your can change the plants getting light. At lest that what I’m going to do . Just started to learn this hydroponic stuff
Use the thin wall not scedual 40 much cheaper and easier to heat and form .I used 12" sch 40 it was work and a wire cabel spool end for base over a 30 gal mineral tubs
When trying to form the hole in the pipe with a heat gun and a bottle the pipe splits when I insert the bottle. Am I over heating or under heating the pipe? Any help is appreciated. 🙏
How many pvc pipe you consume in this project? because the sizes are the one indicated to your description box. Hoping you answer my question. Thank you
People! Yes, greate manual craft, great idea, great harvest but PVC? Please do not use PVC pipes for hydroponic. This is worst what you can do. Heat gun, PVC glue, PVC pipes... Toxic compounds are discharged from PVC pipes all the time your plants absorb them, then you eat them. For hydropinic use PP-R pipes those onces are cheap as well and they are designated for fresh, drinking water. If you are using PVC in hydroponic please don't give your plants to eat by your children at least.
For a lot of places around the world, getting hdpe, ldpe and ppr pipes is complicated and costly, that's why most are using pvc ; not everyone is lucky enough to have hdpe bottles from nutritional supplements line me 😬 Anyway kudos to you bro, A lot of people don't actually know about plastic problem.
Can you use 20 cm pipe instead of 30 cm for connecting the tower with the base ? Is there any significance of using 30 cms length pipe for this purpose (nos -5)
No, it has nothing to do with the storage. It just acts as a connector. Nutrition is already mixed in the water which is stored in the bottom - the t shape and l shape pvcs
I recently got the 17qt round tubs for less than $7 each, which is much cheaper than the 6-inch pvc elbows and other parts used here. The tubs are also easier to clean, and I didn't think combining that many plants to one nutritional watering source is a good idea because if it somehow gets contaminated, the plants on all four towers may be lost since they are all connected. Jmo.
Is that the max height you could do without it falling over? Or just how high you went for convenience of reaching the net pots and harvesting? :] I have a 3 meter tall window i can use at home :D
Whatever height you choose, make sure the pump has enough psi to push against gravity. There’s a psi to height chart and should be given As a detail on the pump you buy
Little tip for anyone wanting to do this, use plumbing glue and primer, cheaper and easier to use.
Make sure your glue and primer are for potable water not just drain lines as well
I like the ring at the opening hole, I been looking a way to stop the water from dripping at the basket, you solve my problem. Thankyou.
LOVE the ring insert idea! Been trying to make my own towers, but could never figure out the dripping issue. Going to try this soon! Thanks!!!
Great idea with 1.5" insert into net cup holes. Never could stop dripping.
Love this idea and how you update us on what you have learned from the process / experiment. Thanks!
I live in Italy and I love your work. You are fantastic !!!!
Cool Hydroponic setup!🌿🌵 I wrapped up my outdoor gardening for the season! Focusing on indoor gardening and hydroponics until spring 2021.🌱
Great video but how do you put the pump? Is there part 2?
Question. How do you keep this thing clean with everything glued together.
Hydroponics is Art, we do support all kinds of material supplies with best quality. If you are interested please check it out th-cam.com/channels/2YoTym4oFDVZdSwJDo-3Pw.html
Pipe cleaner every other week
People manage it with complex bongs 🤣
@@WiCapitalco they use alcohol and salt and can lift it and shake it. Not so sure about this large device lol
After each harvest, you sterilize with bleach.
Good morning Petani please to meet you I'm Jarrod.
Keep up the amazing work, your creative inventions and sustainability is unbelievable. Your a legend I cant take the smile off my face.
I am going to attempt to build my own today. I will send you some pictures.
Don't stop uploading take care my friend.
Very clever. Brilliant use of available material and tools.
Great video, by any chance do you have a material list for this project. Thanks much..
Dapat crita dari teman,,.. suruh tonton video.. wehh hebat.. supot selalu sahabatku..
If you were just doing this once, as much of a headache as it seems, you could say 'okay', but if I were making several of these, I'd just make a jig; that would make the process much quicker.
Hola no sabes cómo te busque!!! Vi el vídeo hace rato y no lo guarde, bueno ahora me suscribo para no perderte un abrazo 🇦🇷🇦🇷🇦🇷💙🤍💙
Thank you. You just made figuring out what we want to do so much easier.
the greatest success that i've had was with the Keiths Ponics Site (i found it on google) definately the most incredible course i've tried.
This is such valuable information! Thank you for sharing!
Pipanya mantap kang macam pohon pepaya, sukses selalu yaaaa kaaang, buat teman yg lain yg suka nonton ini, mampir dong
Ring insert! Thanks that solves the dripping issue
Do you have a complete detailed list of parts to build the 4 towers??
Bro thank you!!!! You just made me a millionaire!!!!
Are you millionaire yet what this idea?
Love it. Only thing that stops me from building my own system is the use of PVC what isn't resistant to UV-light as well as ecologically harmless. I searched for PP-pipes that are less problematic but even this material emites its particles when exposed to sunlight. I realized that conventinal gardening might be the most harmless and environtment friendly way to grow greens. It's kind of ironic that we use so many plastics in our daily life of which we cannot make sure they're harmless. Anyway I hope I will find a material in the near future which I can use without any doubts to copy this system. Thanks for sharing!
I am working with bamboo. Sure it's not as durable, but definitely better then pvc.
that was my response as well. Would you eat or drink from a PVC cup? No, it is known to be toxic. Please correct me if I am wrong.
Paint it with UV resistant paint. Problem solved.
@@wilhelmmatthies5921 I fully agree. We just get drinking water in glass bottles and try to reduce everything that wastes our nutrition that's why on the other hand it must be kind of ironic to grow our plants in plastic.
@@asoka9212 I wished this material was available in larger amounts in Europe. Seems bamboo must be a perfect alternative for this kind of project!
Super, génial, top,... Exactement le type de modèle que je cherchais. Je le mettrais juste sur roulettes pour le déplacer + facilement .
Kalau bikin 5 tower yermasuk tengah boleh ngga ya? Sistem pengairan rencana pakai selang hitam kecil
Alhamdulillah,..Tutorial sangat bermanfaat. Izin bertanya, Kalau tower dibuat sejajar apakah berpengaruh pada sirkulasi air...? Tks.
THANK YOU... ÖZBEKİSTAN...
congratulations on the great construction. can you tell how much water is in this system?
What thickness did you go with, is it schedule 40 or can I use a lesser thickness since it's not under pressure?
4" Drain Pipe
09:23 shows it to be Schedule-80. Makes sense, as the extra thickness adds support strength.
Can use thinner 4 inch.
Asslm nak tanya motor dc pump tu tahan ker atau ada yg berjenama yg sama size…terima kasih
Enjoyed the video but cannot figure out how it's feeding the plants
kak jual pipanya yg uda jadi kah?
oia kak, untuk ring nya itu dipotong berapa tingginya?
Это идеально! Спасибо! Спасибо!
I guess using silicone instead of pvc glue allows you to take it apart, pvc glue is permanent.
Some silicone tends to come lose from plactics while in contact with water, most of them are made for more rigid materials such as glass or tiles.
I would also pvc weld the pipes and fittings which must hold the fluid and friction fit the rest. You could also wrap PTFE Teflon tape around the fitting that you want to to friction fit, this gives you a waterproof seal that you could still take apart
Please give information about ready hydroponic pipe & other fitting which can easily setup anywhere.
What kind of growing medium are you using for this system?
Buongiorno è possibile acquistarlo già pronto?
..Bela.Engenharia.Parabens.ai.Funciona...Valeu.
What size cup do you buy to put in the pvc to hold the plants as they grow
You are awesome man great work keep going
looks very good.
But how do you do that with the fertilizer?
Liquid fertilizer- buy it or diy
bang, ukuran ring nya pas buat netpot 5 cm?
Wie oft muss die Pumpe laufen,oder läuft die durch?
please tell me where you purchase the plastic black cups you use for the plants
Terima kasih. Luar biasa. 😊🙏🏻
What kind of pipe are you using sir? Because the pipe that I've used is the orange and it will tear so bad
Hi if I use a 50mm net pot should the perforated cut be 5.5cm
thank you very much for this video
Very clever
Is that a slow-setting PVC glue? Most of what's available sets up in a couple of seconds so you have to have everything alligned properly from the start.
Kerja yg sangat kemas...ada buat utk jual ke?
what schedule (thickness) 4 inch PVC pipe are you using ?
here in the US, we have sch 20 (light duty/drain), sch 30 (light duty/drain) sch 40 (medium duty/potable water and/or sewer), sch 80 (heavy duty).
your system is very nicely done !
This is dwv pipe . Can get it at any big box store
@@michaelgrveles8890 thank you !
Good luck on your build. I did aquaponic s for about 10 years . All the dwv piping is thinner but cheaper. Can’t use no medals but stainless steel because it will leak the medal into the water. Again , good luck on your build. Just add some light and sand down the top pipe so can spin the tower so your can change the plants getting light. At lest that what I’m going to do . Just started to learn this hydroponic stuff
@@michaelgrveles8890 good tip, thank you. we hadn't thought about moving the assembly for light gathering. we are still in our planning stages.
Sch 40 is pricey and hard to heat, and form I done this with 4/6ft tubes 12"
Use the thin wall not scedual 40 much cheaper and easier to heat and form .I used 12" sch 40 it was work and a wire cabel spool end for base over a 30 gal mineral tubs
How come these builds never show the system auctally growing things?
what ya looking for ,,,,time lapse
Amazing!
Awesome!
సూపర్ ఐడియా బ్రో
¿Que plantas me recomiendan plantar hay?
Keren y om jd pingin bikin
can i buy directly all setup will you provide ?
When trying to form the hole in the pipe with a heat gun and a bottle the pipe splits when I insert the bottle. Am I over heating or under heating the pipe? Any help is appreciated. 🙏
buenas Eeste sistema tambien funcionaria con la aeroponia?
Esto es hidroponia vertical, la aeroponia es otro sistema, parece q no haa entendido bien amigo
What kind of pipe is that? I can't find 4 inch pipe that is that thin.
How many pvc pipe you consume in this project? because the sizes are the one indicated to your description box. Hoping you answer my question. Thank you
th-cam.com/video/iUI_OUE7N8U/w-d-xo.html
pompa apakah harus berjalan 24 jam sehari?
wow 👍👍😍😍
brilliant !
Ini beliin nya di mana ya kang😊
People! Yes, greate manual craft, great idea, great harvest but PVC? Please do not use PVC pipes for hydroponic. This is worst what you can do. Heat gun, PVC glue, PVC pipes... Toxic compounds are discharged from PVC pipes all the time your plants absorb them, then you eat them. For hydropinic use PP-R pipes those onces are cheap as well and they are designated for fresh, drinking water. If you are using PVC in hydroponic please don't give your plants to eat by your children at least.
For a lot of places around the world, getting hdpe, ldpe and ppr pipes is complicated and costly, that's why most are using pvc ; not everyone is lucky enough to have hdpe bottles from nutritional supplements line me 😬
Anyway kudos to you bro,
A lot of people don't actually know about plastic problem.
this comment should be on top
Ppr doesnt exist that large atleast on My conuntry (Italy) and plant should be fine even he get a Little bit plastic from water
@@poison4268 In this case no one cares about your plants. You should be concerned about people eating your fruits/plastic.
@@ekodubek Is a myth dude you can safely plant on PVC withouth any risk even for fruit plant cannot eat plastic
When do you upload the part 2? 😅
May be now,.my be yes😀😀
@@JagaKalicraft
Great utube just did this 4 months ago and it works real good
Wao ide kereatif💪💪💪👍👍👍
How's the the water not to over flow every hole
What are the nutrients add in the water and should water be running 24/7 or 1hr every day
Can you use 20 cm pipe instead of 30 cm for connecting the tower with the base ? Is there any significance of using 30 cms length pipe for this purpose (nos -5)
Probably for a storage for the nutrients they use.
No, it has nothing to do with the storage. It just acts as a connector. Nutrition is already mixed in the water which is stored in the bottom - the t shape and l shape pvcs
Using 20 cms connector makes it more compact.
I was just saying that keeping it all 30 cm gives it more room for the nutrients. That’s all
I should try this technic.. Its best
@HYDROCEMPLUNG BOTTLES VERTICAL FARMING wow
I recently got the 17qt round tubs for less than $7 each, which is much cheaper than the 6-inch pvc elbows and other parts used here. The tubs are also easier to clean, and I didn't think combining that many plants to one nutritional watering source is a good idea because if it somehow gets contaminated, the plants on all four towers may be lost since they are all connected. Jmo.
Super idea 👍
Is that the max height you could do without it falling over? Or just how high you went for convenience of reaching the net pots and harvesting? :] I have a 3 meter tall window i can use at home :D
Whatever height you choose, make sure the pump has enough psi to push against gravity. There’s a psi to height chart and should be given As a detail on the pump you buy
Apa produknya di jual juga kak?
Where should I buy the best aeroponics vertical system? And where is the aeroponics vertical system available in India?
Ad why dit you use the connector pipes
Nice technique.
@Petaki de cuántos mm es el grosor de la pared del tubo de PVC? Saludos 🇦🇷
Yo ocupo 35 no el de 40 ya q el de 40 es muy grueso y tarda mucho más en porder doblarlo
This is great! Sorry how many holes can be made on each pipe?
What do you recommend for cleaning?
Excellent
What pump are you using?
И как все это будет расти? Как будет работать?
Hi Petani Kota87, nice video, please up the good works. I have a question, how big is the size ?
I'll help. The whole system takes up space of 50x60cm. I've done this my self
🎉🎉🎉muy hermoso
food grade pipe? its kinda important if you dont wanna be poisoned
Big Thanx 😊
Satu set kl order brp harga ini om
Sistem kerjanya gimana itu bang?
are you using Schedule 40 or sewage and drain pvc?
Why not use PVC brush on glue?? Using that much glue is a waste as well.
Good idea
Hốc rau bạn xài ống nông là ống 42mm hay ống 48mm vậy bạn
You're pro
awesome, so good that i subscribed immediately
where to get 5 way fitting for 100 mm dia pvc pipe
Fantástico!!!!