Let's design Electrical wire terminals crimp connector using the advance command in Creo Parametric. Understand unbend in details • Sheet metal Unbend in ...
I have facing problem on 25:00 while doing (flat pattern review) .Unbend view is unable to complete . Will be very greatful, if someone suggest solution.
hello, i have some kind of problem with the blend feature,i followed the steps for the sketches, but when i try to connect 2 different sketch in blend,then dont connect, what is the problem?
Dear Friend, I have try to do the exercise once and again, (Using Ceo Parametric 6, educational version) And I am completely unable to blend the last part (10:30 min in the video). My computer can't change from surface to solid. Do you happen to know the why is this? Thanks a lot
@@ao3988 It happened to me, see the vertex you have on each inserted sections. I had more vertex on one section and that is why the blend could not be constructed, once fixed that I could change from solid to surface easily.
This is the problem actually. In Creo 7.0 there is a major change in the option tab. From 7.0 onwards, you can directly access part mode options. There is an extra tab added for all part mode options. See carefully.
your all videos are awesome
Thanks for your appreciation.
Thank you sir, Such a great tutorial.
Sir can you please make same kind of tutorials on Simens NX? That will be very helpful to all
Can you able build in catia V5? If it's possible plase make sure the video.
I have facing problem on 25:00 while doing (flat pattern review) .Unbend view is unable to complete . Will be very greatful, if someone suggest solution.
Hi thanks for sharing the design terminology for terminal, I want to how can we make it using CATIA especially the crimp section?
I don't use CATIA.
what are the units?
how do you keep the drawing image open in the left side?
same question
hello, i have some kind of problem with the blend feature,i followed the steps for the sketches, but when i try to connect 2 different sketch in blend,then dont connect, what is the problem?
You increase your part accuracy first.
@@CADxTraining can you give me the complete part that you created in this video?
@@CADxTraining how can I increase the part accuracy
Blend feature is not coming
Sir how can we find the length of secoond blend 4 mm?
It's assumed. That dimension is not available in the given drawing.
Sir im not able to use the mirror command at 12:35 idk whats wrong and the error msg is (underdimensioned section. please align to part or add )
I think, some dimensions are missing to the section.
@@CADxTraining I followed all of your steps correctly and i still get this error . I will try again and let yu know
10:48 After changing surface to solid its not showing preview now what to do?
Increase the model accuracy
Go to File-Prepare-Model properties-Accuracy.
Change the accuracy as 0.0001
Dear Friend, I have try to do the exercise once and again, (Using Ceo Parametric 6, educational version) And I am completely unable to blend the last part (10:30 min in the video). My computer can't change from surface to solid. Do you happen to know the why is this? Thanks a lot
First you create this feature in surface then change the end condition and make it normal. After then change to solid
I try this a lot of times, and follow your tutorials very carefully, but no way... to get the piece done
@@ao3988 It happened to me, see the vertex you have on each inserted sections. I had more vertex on one section and that is why the blend could not be constructed, once fixed that I could change from solid to surface easily.
I too have similar problem
Increase the radius it gets solved then. ✌
From 0.20 to 0.40
I mean same terminal
why we do not use swept belnd instead of blend
Because you don't have any trajectory here.
If you would be as kind as to give me a way to contact you I would send you some screenshots or a video with the error
Mail me at sandesh4satyen@gmail.com
I'm unable to solidify after surface blend at 10:35
Go through this
th-cam.com/video/8E6euz0NALk/w-d-xo.html
11:13 flat pattern not working for those?
Increase the file accuracy
There is no BLEND AS SOLID OR SURFACE option as shown in the video.If anyone could guide me through this,kindly leave a comment.
Which version of Creo are you using?
@@CADxTraining creo 7.0
This is the problem actually. In Creo 7.0 there is a major change in the option tab.
From 7.0 onwards, you can directly access part mode options. There is an extra tab added for all part mode options. See carefully.
@@CADxTraining which version of creo are you using?
Creo 6.0