Hello mate, I follow you on TH-cam, I also have a roof tent and I contacted PPDperformance to get OzRoo tub rack to put the tent on, I would like to know where you got the reinforcement you have in the box for the mountain top roller like mine. thanks if you can answer
Not if you include the tools no The assumption is that these tools and the wire would be needed anyway if buying a pre-built box to add in your accessories Always good to have handy also when out and about for any repairs
Hey mate I’ve got the same tub rack and love your setup with the fridge and false floor etc I’m looking to do exact same thing but just with a tonneu soft cover instead! I’m just a bit stumped with how to wire up the lights I haven’t got an auxiliary battery setup yet and I’m wanting to wire them up to the starter battery with a rocker switch on the dash and also reverse lights! How did you wire yours up? Cheers mate love the content! Keep it coming 🤙
Cheers Ethan! Glad you like the content :) I'm not an auto elec so don't go just of my word. All I've done is used the dual core wire from the lights to the switch (+) and earth (-), then added a fuse on the positive into the switch. All earth's go back to the negative side of my secondary battery. I may add some relays later on but I think the LED's are low enough amperage to run just with the switch (again confirm this before doing it yourself). Thanks for watching 👍
Hey mate, mines only a PX1. I would suggest the Ranger owners group on Facebook for advice: facebook.com/groups/452268501615524/?ref=share Every car has its problems but that's all people talk about, not how great they are
Neat job mate, well done! I think I’ll give that a go now🤙
Cheers mate 👍
Good luck with the project!
Awesome video and instructions. Thanks. Can you provide the box dimensions as the link is no longer active. Thanks.
Cheers mate! The box I got was 290 x 210 x 100mm
Thanks for watching 👍
Good work bud.
Cheers mate 👍
Nice work!
Cheers mate 👍
He brother, what size box did you get? Im looking at your links in the decription but there is 4 to choose from? Cheers mate.
Hey mate, I got the largest one 290x210x100mm
@@Shenanigans4x4 Thanks mate. cheers
Kings have a compact control box for less then 100 bucks
Very well done. Cheers for the gd ideas 👌
Top video mate! I have been looking at doing the same kinda thing 👌
Cheers Trav!
It's a lot easier than it looks once you get your head around it
Thanks for watching 👍
Seriously dig this control box. The link has expired unfortunately what's the diameters of the box if you don't mind?
Hey mate, dimensions were 290 x 210 x 100mm
Cheers for watching 👍
@Shenanigans4x4 thank you appreciate it ima try get the same and build along with you
Love your work! What’s the butane torch you are using?
Thanks mate 👍
It's my Snap-on butane soldering iron with the tip taken off
Cheers for watching 🍻
Hello mate,
I follow you on TH-cam, I also have a roof tent and I contacted PPDperformance to get OzRoo tub rack to put the tent on, I would like to know where you got the reinforcement you have in the box for the mountain top roller like mine. thanks if you can answer
Cheers mate!
Check out bespoke_offroad_accessories on instagram
Great quality product and made in Melbourne
@@Shenanigans4x4 thanks my friend greetings from Italy
@@aroundtheworld1963 caio mate!
Where did you get the plastic enclosure from mate?
Hey mate, check out the project box link in the description 👍
Cheers for watching!
Does it still come out cheaper after buying the tools?
Not if you include the tools no
The assumption is that these tools and the wire would be needed anyway if buying a pre-built box to add in your accessories
Always good to have handy also when out and about for any repairs
Awesome 🍺
Hey mate I’ve got the same tub rack and love your setup with the fridge and false floor etc I’m looking to do exact same thing but just with a tonneu soft cover instead! I’m just a bit stumped with how to wire up the lights I haven’t got an auxiliary battery setup yet and I’m wanting to wire them up to the starter battery with a rocker switch on the dash and also reverse lights! How did you wire yours up? Cheers mate love the content! Keep it coming 🤙
Cheers Ethan! Glad you like the content :)
I'm not an auto elec so don't go just of my word.
All I've done is used the dual core wire from the lights to the switch (+) and earth (-), then added a fuse on the positive into the switch.
All earth's go back to the negative side of my secondary battery.
I may add some relays later on but I think the LED's are low enough amperage to run just with the switch (again confirm this before doing it yourself).
Thanks for watching 👍
Hey mate, where did you get the box from?
Hey Jack, check the description I put a link in there 👍
Cheers for watching!
very helpful gave me some good ideas
Glad it helped mate!
Cheers for watching 👍
Mate do you know things that’s problematic on the px2 ranger 3.2 I am thinking of buying one
Hey mate, mines only a PX1. I would suggest the Ranger owners group on Facebook for advice: facebook.com/groups/452268501615524/?ref=share
Every car has its problems but that's all people talk about, not how great they are
@@Shenanigans4x4 yea I know I just wanted to ask you mate