Homemade dump trailer

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ธ.ค. 2024

ความคิดเห็น • 45

  • @TheFunnyGuyWay
    @TheFunnyGuyWay 3 ปีที่แล้ว +8

    Great job. I can’t find any others similar to it on TH-cam. Many of the winch lift dumps have stationary posts that are supported with angles. You definitely have a mechanical mind to understand that this post needs to pivot as the dump body forms in arc as it lifts. That is brilliant. I love TH-cam so that people can share these ideas. Thank you so much. I’m excited to get started on mine.

  • @yahsephhawkins9503
    @yahsephhawkins9503 4 ปีที่แล้ว +5

    You did a great job of engineering.
    I haven't found anyone else that has thought of a kickstand or the bracket to hold the post out from the dump bed.
    Keep on with the great work.

  • @Maxwelshouse1
    @Maxwelshouse1 ปีที่แล้ว +1

    You are well on your way :) I love my dump trailer from a pickup box. hydraulic dump.
    I would definitely try to adapt a cordless drill or torque wrench for cranking it up and down. You will find your Garbage Runs less dressful. Be safe

  • @gteea
    @gteea 3 ปีที่แล้ว +3

    Great work on having a go, thinking and adapting common concepts to make it work.
    Cable and winch tippers are making a come back as its 1/5 the price of hydraulics.

  • @korizzono52
    @korizzono52 3 ปีที่แล้ว +3

    Very nice Jimmy thanks for sharing!

  • @duke4274
    @duke4274 2 ปีที่แล้ว +1

    The pivoting post is genius

  • @367scotty
    @367scotty ปีที่แล้ว +1

    great idea . Nice job

  • @MohamedHassan-ni6un
    @MohamedHassan-ni6un 10 หลายเดือนก่อน

    Well done Jimmy. The YT community (Netizens) are impressed. This is definitely a first of its kind project. Fine job of walking around and demonstrating it in action. The only thing I wished is if you made like a short 10 min video series of you actually building it. Maybe even providing a blueprint for us nerds ;)
    But I feel confident in building one now. Maybe not as good but I'll give it a shot.
    Mohamed
    Somalia

  • @pg9112471
    @pg9112471 4 ปีที่แล้ว +2

    I had a harbor freight 4x8 trailer and I was given a 5x8 trailer with a ramp for a job I did. I took apart the 4x8 welded it solid and put it inside the 5x8 used the same hinges for the pivot and used a detachable 2" square tube inside a 2 1/2" that extends from 4' to 7' I welded a 4000 lbs. winch to it with a remote control and it works awesome. You need an electric winch. You won't regret it.

  • @patrickoshea9527
    @patrickoshea9527 2 ปีที่แล้ว +2

    Great build, but you need an electric winch lol

  • @restfulplace3273
    @restfulplace3273 2 หลายเดือนก่อน

    A few things I might do different. Still cool.
    Either way, seeing others having a go makes me happy.

  • @kenk5051
    @kenk5051 3 ปีที่แล้ว +1

    Very good ideas. Thanks for sharing!!

  • @farinho100
    @farinho100 11 หลายเดือนก่อน

    Good job. Thanks for sharing

  • @elgimecastillo3965
    @elgimecastillo3965 3 ปีที่แล้ว +1

    You did a great job

  • @hughparker3971
    @hughparker3971 4 ปีที่แล้ว +2

    Very nice, thank you for sharing this.

  • @zaruswright394
    @zaruswright394 4 หลายเดือนก่อน

    Awesome job

  • @johnnyjeep8350
    @johnnyjeep8350 10 หลายเดือนก่อน

    Very nice engineering, good job 👍

  • @imnotdon3765
    @imnotdon3765 3 ปีที่แล้ว +1

    Good build and good ideas

  • @Garmatnuy
    @Garmatnuy 3 ปีที่แล้ว +1

    Зварювальні шви треба зачисчати,ідея непогана.👍

  • @gulabkhan2639
    @gulabkhan2639 3 ปีที่แล้ว +1

    Very nice

  • @larryhenriquez550
    @larryhenriquez550 3 ปีที่แล้ว +1

    Good build but them welds looks scary

  • @novafourtwoseven2888
    @novafourtwoseven2888 4 ปีที่แล้ว +1

    Great job very good video thanks

  • @estegueydijo....
    @estegueydijo.... 3 ปีที่แล้ว +1

    For the pole you can do a telescopic one. And maybe add an electric hydraulic winch.

  • @jesuspena1133
    @jesuspena1133 4 ปีที่แล้ว +4

    How much weight can it lift, good idea

    • @shannonp4037
      @shannonp4037 4 ปีที่แล้ว

      As much as the winch/pulley system can handle combined with the trailer capacity.

    • @nothingelsebuttruth
      @nothingelsebuttruth  ปีที่แล้ว

      More than 2000lbs

  • @WildMontanaHuntingAndFishing
    @WildMontanaHuntingAndFishing หลายเดือนก่อน

    Why such light weight hinges? Use at least a 1/2 inch carrier bearing and no need replace them as much.

  • @383chevystroker
    @383chevystroker 3 ปีที่แล้ว +1

    Nice job !!
    Where did you get the pulleys from ?

  • @sdvr1
    @sdvr1 3 ปีที่แล้ว +3

    I want to see you do that when is full load

  • @donaldgulledge729
    @donaldgulledge729 2 ปีที่แล้ว +1

    Very nicely done. I think I would add Teflon sliders along three sides of your vertical pole and then add some grease or rolling ends to your contact points where you installed the alignment bolts and the bar that rides up the pole. It will save your paint and eliminate the continual rust issues your going to have - as well as the scraping noise. Other than that you've got a great and functional lift device and you could even easily upgrade to a motorized wench at some point either electric or hydraulic. I though of doing almost the same thing but with a hydraulic ram instead of your cable pole and using a cheap 12V automotive power steering pump for the hydraulics (a few cars use electric pumps instead of running off the engine serpentine mechanical pully). But I would prefer the hydraulic "pole" design rather than a scissor lift or under trailer mount much like you have shown here for reasons I won't explain here.

  • @MiguelPacheco-b1z
    @MiguelPacheco-b1z 2 หลายเดือนก่อน

    Cool but show with it loaded

  • @alexhernandez5061
    @alexhernandez5061 ปีที่แล้ว

    You can take that cranck handle (make it where if you need it you can use it) off and make it where you can hook up a drill to it.(not a impact but a drill)

  • @pedroclemente7467
    @pedroclemente7467 11 หลายเดือนก่อน

    Nice idea I like it! Any update on New?

  • @merlin1346
    @merlin1346 ปีที่แล้ว +2

    Looks similar to the one that I built 10 years ago (link below), it was finished off with double rear gates that folded and locked back to the side of the trailer body. It was used every weekend at a car boot sale collecting left behind rubbish. The winch was a 12 volt 3500lb made in China that also had wireless remote control but worked more smoothly hard wired as in the video. The chassis was from a 16ft caravan.
    th-cam.com/video/WeHV8Rg4YkI/w-d-xo.html

  • @jadinaguilar9465
    @jadinaguilar9465 3 ปีที่แล้ว +2

    Hazme uno para levantar paredes en el wood framing es similar

  • @oscaramaya7254
    @oscaramaya7254 3 ปีที่แล้ว +1

    How much weight can it dump

  • @happydays454
    @happydays454 3 ปีที่แล้ว +1

    Wheels on track would work

  • @MrFilthylokz
    @MrFilthylokz 2 ปีที่แล้ว +1

    👍💯

  • @นายอินขอรับ
    @นายอินขอรับ 3 ปีที่แล้ว +1

    Good job เยี่ยม ขอรับ

  • @pojdiavaj1422
    @pojdiavaj1422 4 ปีที่แล้ว +2

    Any video when using. I wanna see the failing.

  • @butchmcintyre5196
    @butchmcintyre5196 3 ปีที่แล้ว +2

    the welds are terable hope they hold

  • @Gus1966-c9o
    @Gus1966-c9o 2 ปีที่แล้ว +2

    Great design , horrible welding .