ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Tig Welding TIPS for Mitred Corners! TRY THIS!🔥🔥
ฝัง
- เผยแพร่เมื่อ 20 ม.ค. 2021
- Another request came in via my Instagram, someone wanted help with Tig Welding tips for welding out a Mitred Corner! And I said HECK YES! I love this joint! It's really common, simple, and I would argue one of the BEST chances someone can have to practice getting dialled. If you can master this joint, then you are definitely styling and on your way to laying some nice lines on more difficult joint configurations. So grab a clean tungsten and a cup of coffee, and let's party.
If you are interested in a custom metal art piece, hit me up and send me an email on my website here www.pacificarc...
**More Art videos HERE**
• Pushing Tig Welding to...
**Gear I use!**
www.canaweld.com/
edgeweldingsup...
www.ckworldwide...
**DO YOUR AMAZON SHOPPING WITH MY AFFILIATE LINK!**
amzn.to/2PgLLba
Thanks for checking this episode out! Check out my newest ART PROJECT!🔥 th-cam.com/video/bYZK_ivEKRs/w-d-xo.html
20 yrs. experience? Kudos to your dad for starting you at 5. You have a great talent and are willing to share. Love your work and insight. Thanks.
Thanks Dusty! Awesome welding and great tips! Love the random act of kindness challenges - not only does that give the receiver happiness, it also gives the giver happiness as well as anyone who witnesses the act! (according to a study on happiness) Dusty is right - spread some joy into the world and we'll all be happier for it!! 😎
Yo I appreciate that! And you watching as well;) Cheers to you my friend 🤙
Another fantastic video Dusty. I really like the text instructions during the bead shot clips.
Cheers my man! Glad you enjoy:)
The best on TH-cam
Great technical detail. Nice arc shots.
Dusty,
Do a full video on blow out when welding tubing together and how to prevent it.
I'm new to the channel, so perhaps you've done this in the past. I would have found it helpful to see the positioning of the work piece through each phase of the welding process. Also, perhaps talking through the pedal action/heat increase & decrease through the welds. Thanks for making these videos and showing machine setup at the start.
Why is it always so easy when You do it... Another great video. Keep up the good work.
There has been many not so nice ones in my past... trust me😂 Thanks for watching and saying hi!
Thanks for all your videos. You've helped me tremendously with aluminum joints. Especially helpful is your emphasis on patience at the start of a weld in establishing a proper puddle. The difference between a beautiful and consistent bead and a row of sooty, ugly pebbles seems most often to be the result of impatience and poor prep.
Awesome! Happy I could help! Cheers and thanks for checking out the vid!🤙🙏
Wow, you're experience shows in your welds! I think that was a great looking joint and you made it look easy. Thank you for all the good instruction, I appreciate you and what you do on your channel!
Thank you for the tips as usual! We really appreciate it!
Awesome video and awesome advice on tack placement!!! Another great tip that I hadn't realized can make a difference is when you showed that you had cleaned the inside walls of the joint as well. I just recently got a new Miller Infinity with the HD that enabled me to see that thin line of contaminant coming out of the joint and down the center of the pool. I did not realize it could be traveling in from the inside of the joint. I will be trying your tips in the morning!!! Thanks Dusty!!!!
Dude, you are a legend. Thanks again for the awesome vids 🙏🏽
Grinding the out side corner back to about the width of your bead can help the weld profile.
Your skills are something to aim for, just fantastic and you’re an excellent teacher as well. Thank you.
Thank you so much Michael. I appreciate you checking the episode out🙏🙏
Nice. Articulate and a solid example. It's obvious you enjoy your art of welding. Thank you.
Happy to share. Thanks for watching! Cheers:)
Hi Dusty..... subscribed as one of your first followers...... Thanks for showing also practical welding like in this episode with square tubing!! BR from Jan, Stockholm, Sweden👷🏻♂️👍🏻😊👌🏻
Nicely done. As already mentioned the tips displayed in text are a nice feature.
I enjoyed it. Thank you.
I would like to know more about the distortion after welding.
Outstanding channel Dusty, very educational videos and builds, Thank you for sharing 👍👍👍👍👍
Thanks for the great tips, will have to try this tomorrow at the shop. Great video!
Really helpful videos Dusty, thanks for doing them. Cheers from Toronto.
Cheers I think you produce the best welds I've ever seen. Great info too thanks.
Excellent job notice the fillet was welded last ! Great advice 💯👍
Great video ! Sir
Very informative. Thank you!
Nice job. Of the scores of videos I've watched, yours is the first I've seen that emphasizes the length of time it can take for the puddle to take shape. During my "apprenticeship" in aluminum TIG, I've fouled up more welds by just not being patient enough to let the puddle form properly. Bad start, bad weld! Thank you for your insight.
Thanks Dusty! I always enjoy your videos.
Yes! My man D on the favorite metal with a fresh vid! oh snap, I see ya got the logo reppin behind too! Good to see u brother, thanks for putting out another quality one! Been pretty quiet here in youtube-land past cpl weeks
Thnx Dusty 🙏 I’m just about to GTAW A36 Sq. tube miter joints as slip joint corners for welding curtain frames and this definitely helps especially when planning the sequence of beads being laid down. The material is a little bit different but the principles of operation are the same
Cheers from south of the border in the PNW
Really nice and informative video Dusty. Maybe talk about how much relative heat each type of joint needs. I know for carbon steel on a fillet I try to aim for maybe 10% more heat than a butt joint and 10% less on an outside corner, but that's just me and I'm pretty much a hack welder. Thank you and peace my brother.
Excellent welding shots, thanks.
Thanks for sharing.
man your amazing ! great teacher👍🏻great video site!! love your inspiration of life .. dusty🙏🏻🙏🏻🇦🇺
Cheers Peter. I appreciate you checking it out!
Killer instruction Dusty! Appreciate the time and the effort you put into these videos 🙌🏼🙇🏻
Hi Dusty, a million thanks for your videos and making tig welding a very enjoyable experience even with some frustration. I you get a gap try this one. Joining two ally tubes together in parallel ( shotgun style) The pipes I have are 32mm OD with a 4mm wall thickness. I would send some samples, but nearly on the other side of the world. I do find this tricky.
Real time welding,outstanding
Cheers! Thanks for watching!
Good stuff and good looking welds as usual. Tack in the corners is solid advice! Thanks bro, I hope someone does something nice for you. .
Great video Dusty! I would like to see a video of tig welding a fillet joint in thin material. I’m having problems with burning through or causing the backside of the vertical piece scaling. I’m working with 16 ga to 12 ga mild steel. A video that talks about controlling the heat would be great!
Looking forward to this one. I have a project with mitered joints on L channel I'm working up to.
It's like Dusty knows - I did the same thing last weekend and .. I need practice. Et voila, a video appears!
Thanks, every little bit helps. LARRYMOORE
Awesome episode. Thanks 👍! I was hoping that one day you gonna make one, about corner welding.. Shout out from London ✌
Awesome happy to help! I’ll be doing one with pipe as well sometime soon. Basically a 90 degree same as this but a round surface 🤯 Lots of fun:)
@@PacificArcTigWelding I look forward to that, cause welding pipes are part of my work. 🙌
Your welds are ridiculous !!!! Great job and thank you for sharing> really enjoy your videos.
Thank you! More to come:)
You rock!
P.s. bro, idk if u have or not but, maybe next instructional one you do can include pipe butt/miter. Or maybe the common 3" intercooler aluminum tubing. Smaller tubing, not nuke and gas stuff lol. Pipe for the home guy and beginner. (Technique for exhaust, intercooler, cup holders, manifolds, whatever!) Oh, also, my random act was helping a depressed 14yr old kid feel a little better, who commented on one of my comments. Turned into a lonnngggg convo. He needed guidance lol anyway. PEACE D!
Great Job! I really enjoy the videos!
Thanks so much! I appreciate you watching!:)
Another great video sir!!
Thanks Craig! I appreciate you man!🙏
Great video dusty! I’d love to see basically the same video, but stainless tubing 1/16” wall. I’m sure it will come up when you get to showing stainless. Keep up the positivity and beautiful dimes brother
The edges of the weld... aka the "toe"
Smooth tie in at the toes 👍
Hey can you do a video with doing T joint fillet welds from 3/16 plate to 1/8 round tube
Thanks, could you please put a cam on the amps, knowing the amps helps a starter like me understand where I need to be
I used to think so myself but but honestly just getting the experience is far more beneficial. Trial and error and playing with the foot pedal with the amperage he recommended will do wonders for you.
Excellent
I’m just learning
No benefit to beveling first? Great content! Thanks.
Thnx for the nice clips 👍🏻
Make a pipe welding demo please. I am learning wwelding as an installation technician, so I would appreciate it greatly.
Good welder...great guy...☝️👍
Good welding is one skill,
Pretty weld shots is another challenge. Great job.
How many pieces dud you have to weld for this video? Just the one?
Nice job, I have a problem finding radius corner aluminum tube. Square edges are hard to make pretty
A little rounding of the corners with a grinder (within reason) will help the corner profile a bit:)
Nicely done. Precision Panel Craft U.K.
Any tips and tricks for anodized aluminum?
Hi Justin, do a review on the EWM welding machine, or tell me you put a balance of 30, on EWM how much it will be there from zero +25 and -30
Folks, this is great info so pay attention to Dusty. Good camera work of arc and puddle. Thanks
fantastic video! how do you know how far to press the foot pedal, you can not look at the screen of your machine while welding. I have that flat welds work perfectly, but as soon as I want to connect two pieces of aluminum straight or I blow a corner I blow through it too quickly. do you have a tip?
Should cut the weld see if u got full depth weld
I stick weld and looking into tig weld looks amazing. Just wondering how deep it got because usually we cut the ends so it can get full gap fill between the two pieces instead of the weld just on top of each other sides
I’m curious: Why do you set the petal to melt the sun at full blast instead of an amperage closer to what the material needs max?
Same
@Pacific Arc Tig Welding - Dusty, Does that technique of welding the inside corner last help to keep the miter square?
I don't know if you've done a video on this yet, but what's your favorite cup to use for different types of welding (mild, ss, aluminum, etc)?
Good idea. I’ll maybe do one like that. Appreciate the idea!:)
Привет. Нормально сделал. Мне больше нравится алюминий сваривать. С нержавейкой много мароки, надо поддув и т.д.
interesting to see the order you do the welds in , not really the norm , is there a reason for this.
What amps is the machine using when you are welding the joint? I know it's on the peddle at 200 max, but what is the display saying please?
Thanks, Paul
Was the angle of your joint 90 degrees when you finished welding? Its nice to have a great weld but ultimately the angle needs to be correct. Any tips for this.
Didn't see any prep for joint or cleaning???No beveling (if grinding smooth)Acetone wipe?
What are the pulse settings?
What material did you use here was this aluminum?
No weld prep on joint?.
Good video.
So, mitered corner with 1/4" wall angle?
When welding mitered corners on tubing especially thicker tubing as you do in this video . Why do you not bevel the edges of the tubing in order to get more penetration and a flatter finished weld ? I would have beveled the edge first was just wondering why you left it square and flat your welding is beautiful I’m not critiquing just wondering I can understand on thin tubing but I usually bevel thicker material 3/16-1/4 and definitely anything thicker
How do i sign up for your on line lessons?
Really like your videos. Just getting in to them. I was welding up this joint this week (actually mitred alu angle - 2") and I found I was getting better results by grinding the open corners flat so I could get better pen. When I left the points on, I found them kinda thick. That said, the crap off the grinder wheel made the welds really drossy, even though I "cleaned" them with acetone :D What's your view on this?
👊🏼👊🏼👍🏼
Hey bro, one thing I notice is , a lot of people don't "V out" for the bead when doing tig. I mostly use steel but got my machine to dabble in Aluminum. Is there a reason for this or is it just on Aluminum?
I am new to tig welding I am left handed what hand should I hold the torch in.
Whatever hand you hold a soup spoon with:) I’m a lefty- left hand soup spoon/ left hand torch🙏
Be sure to get the left-handed torch. It makes things so much easier.
Ok, this is good, but the joint I am really struggling with is a “T” joint with the same type of aluminum square tube. Never fits flush, because of the rounded corners. Having one fresh cut end welding to a rounded side, they always seem to melt differently. Any tips?
Hmmm. Tough. It’s kind of like a Flange weld then slightly. Or J groove I’ve heard it called. Fill in the gap as best you can, as it’ll fall hollow. Keep an eye on the reinforcement and leg length:)🍻
@@PacificArcTigWelding okay thanks! Will keep working on it!
Yeah, the side of a tube will always absorb more heat than an open end. I try to aim/focus the arc more towards the side to compensate. Like welding thick to thin.
Dusty, how much pedal do you think were you using of that 200A peak? I'm starting to wish I'd gone one or two bigger with my R-Tech (looks a lot like your Everlast, but 150A)..
I have been trying to follow your instructions, but for some reason, I can make A decent weld and the rest of the other ones are bad.😔
How much does your TIG welding course cost? How long is the course?
If you Hit me up on my website and get in touch there I can provide more info there :)
Www.pacificarctigwelding.com
When welding aluminum do you go by the 1 amp per .001 rule? I'm doing a similar project with .065 wall round tubing and I keep blowing through it. I ended at 30amps and still blowing through before I called quits.
Yes I'm there too
Love your videos, but you need to run a sound filter on the welding portions of your videos.
That sound is freaking my speakers out. Not a good sound ha.
OK, This was good, but..1st; it was hard to tell the succession of the weld joints. I think you kind of went over it at the end and if I understand it was "butt-outside corner-butt-fillet". 2nd, you need to describe about how much your stepping on the foot pedal. I'm pretty sure you did not weld all those joints at 200 amps. Maybe a little more narrating about the things you automatically do for us fledgling beginners. I'm just saying that the tasks that are second nature to you are not to a beginner.
Sorry I don't mean to sound negative just trying to learn. Love your work and thanks for sharing.
OH and one other thing. Any tips on using a foot pedal other than sitting, like standing up or kneeling down? I tried it the other day (I was welding steel, repairing a log splitter) and boy was that weird. I've always been a lift arc starter and am new to a pedal & finger trigger.
Be Safe, Stay Healthy
Tony
Marietta, PA
WHEN YOU CAME OVER THE TOP AND DID THE SECOND BUTT WELD , IT LOOKED LIKE YOU WERE ADDING TO THE RIGHT OF THE PUDDLE - ANY REASON FOR THAT ?
Przyjmujesz kogoś na praktykę ?
You said "butt joint".....
😂😂😂😂 The funniest joint of all
@@PacificArcTigWelding butt joint,V groove,penetration... yeah this was definitely started by men lol
@@jaredhammonds8255 LOL
dam , why does my 200 dollar tig not work the same ?
You never told us the thickness or even what metal it was
Mind vaporizing acetone toxic af.