Radiomaster Nexus Part 4 • Motor Setup • Governor • ESC Calibration • Auto Rotation • Radio Setup
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- This video is part four of a five part series on setting up the brand new Radiomaster Nexus FBL. I'll be joined by OMP Team Pilot Rob Burrow to walk you through how to setup your motor and ESC in Rotorflight.
00:00 Intro
01:08 Wiring
03:35 Enable Telemetry
04:45 Receiver Settings
05:45 Auto Rotation Bailout Settings
06:37 EdgeTX Radio Settings
11:00 ESC Setup
13:02 Gear Ratios
14:51 Motor Pole Count
15:23 Governor Features
30:54 ESC Calibration
33:57 Throttle PWM Calibration
38:35 Dshot Setup
Part 1: RotorFlight
Part 2: EdgeTX
Part 3: Geometry
Part 4: Motor Setup
Part 5: Advanced Setup
PRODUCT [AFFILIATE] LINKS
► Radiomaster Nexus FBL: www.radiomasterrc.com/product...
► Radiomaster RP3-H Rx: www.radiomasterrc.com/product...
REFERENCE LINKS
► RotorFlight Configurator: github.com/rotorflight/rotorf...
► RotorFlight Discord: / discord
► RotorFlight Setup Guide: www.rotorflight.org/docs/Tuto...
► Telemetry Re-use Commands: www.rotorflight.org/docs/Tuto...
► Multi-Stage Gear Reduction: www.rotorflight.org/docs/Tuto...
► ELRS Switch Config: www.expresslrs.org/software/s...
► ELRS Telemetry Reuse Video: • Radiomaster Nexus • E...
► ELRS Telemetry Reuse Options: www.rotorflight.org/docs/Tuto...
RCVR MERCH and PRODUCT LINKS - If you use my affiliate links, the channel will receive a small commission. These links cost you nothing extra to use.
► RCVR-1 Orange www.etsy.com/listing/16830707...
► RCVR-1 Black www.etsy.com/listing/16808499...
► RCVR-2 www.etsy.com/listing/14977817...
► NEW Merch Store: rcvr.myspreadshop.com/
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► Discord - Hang out with the RCVR Crew: / discord
► EdgeTX Fest 2024: edgetx.org/fest2024/
#rcvideoreviews - วิทยาศาสตร์และเทคโนโลยี
I had a successful maiden flight today thanks to these videos! Much appreciated and looking forward to the next video on PID tuning.
Nice! Glad to hear the videos are helping you guys get in the air with Rotorflight and Nexus.
YGE, Scorpion and HWv5 ESC programming through RF will be very nice!!!
Agreed!
Great information guys. Thanks for the effort you boys are putting into this project.
Thanks for watching!
Thank you so much for your detailed videos. I had a great time setting up my Nexus and a very succesfull maiden ( 6 flights already) with no issues.. Soo looking forward to the next video regarding PID's and learning new things. I still need to get my Autorotation setup for my Kraken 580 using your setup, but will get there.. 10% throttle seems a little low for me but that might just be because I am not a fan of auto's hahahaha..
This is the kind of comment that makes the work worth the effort. I'm glad the videos helped you work through your setup. My Kraken is waiting for its Nexus :)
Tack!
Du är välkommen, och tack för att du slog i tipsburken.
Thanks for this excellent series, some great info.Interested to know if you will be also covering PID tuning?
PID tuning will be in Part 5.
Can you use a castle creation esc with nexus. What is the setting for that.
One question....if you are going to configure the governor in rotorflight (mode 1), you must deactivate all the ESC governor options, correct? Including soft start? Thank you in advance
Thanks for these videos! Would be great to see an example of a "Normal" throttle mode, like you get on OMP hobby M2 with omp protocol rx; looking at docs, do you create a profile with passthrough governor?
Covered in part 2. Radiomaster Nexus Part 2 • EdgeTX Setup • FREE NEXUS GIVEAWAY!
th-cam.com/users/livekS20_eaAP8A?feature=share
Again, great tutorial. I’m still not able to arm after watching this several times. Using a SAB Goblin 280 (havoc) 60A ESC. This ESC has no rpm or telemetry as far as I can tell. Only the ESC signal wire plugged into the ESC spot on the Nexus. I can get the motor to spool up under Motor override. However it will not spool up until 0% throttle pwm value is set to 1350. I’m baffled, I cannot for the life of me get the motor to spool up even after setting up my TX16s like yours (video 2). Is the RPM and telemetry wire required for this to work? Also dumbfounded why the motor won’t spool up at 1033. I have to move the slider half way for it to jump on when set to 1033. I’ll rewatch the tutorials and go at it again. I’m sure I’m missing something. Thanks again for the great support you offer to the hobby.
Did you calibrate the ESC?
Following up on an earlier question, I am using the Hobbywing Platinum V4 and it comes pre-configured in 'Elf Governor ' mode. Do I need to change the default ESC configuration in any way, or does Rotorflight effectively bypass what the ESC would normally do? Fantastic videos as always! 👍
You want the ESC in fixed wing mode.
@@RCVideoReviews Thank-you!
Hello, or heli linear??
Hi any video of CLI tab pls ???
"This video is part four of a five part series on setting up the brand new Radiomaster Nexus FBL" Hmm? I was going to get this controller but after reading this, I think I am going to pass. : )
Yeah, you definitely should pass.
@@RCVideoReviews Not the response I expected, ha ha. I was thinking you going to say something like, "It's not that hard. give it a try."