It's not trigger creep in the P-01, it's the hammer camming back. watch the hammer as you pull the trigger, you'll see. When my grandson got his carry permit, I opened the safe and said, "Pick one". Of course, he picked the CZ P-01 w/Dawson night-sights and LOK Palm-Swell grips. Now I need to get another P-01.
Interesting, thanks for the info. That was a mighty generous gift to your grandson! I'm sure he appreciates it very much. But yes, you do need to replace it now. 😁
I absolutely love my CZ P01. Its one of the easiest guns I own to shoot accurately. The grip angle, low bore axis, and contouring all make it extremely comfortable and low recoiling. The all metal construction is very nice as well. A few things to note which I learned after some time spent with my P01: After roughly 500 rounds the trigger really begins to wear in. It becomes more consistent, smoother, and more crisp. Dry fire will help speed this process up, just keep in mind that its a good idea to pre-emptively replace the firing pin retaining pin every 1500-2000 rounds. The trick is that dry fire hammer strikes do count towards this total and should be kept track of. A set of thin Lok G10 grips are a life changing addition to any P01. The factory rubber grips are nice but begin to move around some with age, and can be very slick when wet. The Lok G10 grips solve those problems. The textures are great and the thin profile made the longer than normal CZ length of pull much more manageable. Mec-Gar make some of the best P01 magazines on the market and are significantly cheaper than CZ branded mags. I've been casually eyeing a PX4 Storm Compact for quite some time now and will likely end up purchasing one soon. I love the rotating barrel design and think the PX4 Storm deserves a chance to prove itself. I will definitely have to upgrade it to a "G" model decocker only though as I believe that 99% of the time a safety has no place on a defensive EDC handgun. Finally if you fall in love with your P01, as I expect you will, you really should check out the CZ P07/P09 as a cheaper, polymer framed, DA/SA option. After purchasing a P07 I tend to use my P01 as a weekend warrior/fair weather safe queen, and let the P07 do most of the dirty work. The P07/P09's polymer frame and more modern slide coating makes the handgun significantly more "rugged" than the P01, and if/when you do manage to damage a P07/P09; they're 20-25% cheaper than most P01s which makes the damage much easier to stomach.
Thanks for watching David! And for all the insightful information as well. I need to smooth out the trigger on my P01 a little more with some shooting. Had to do the same with my SP01. Luckily CZ provided some snapcaps with the SP01 so I was able to dry fire it quite a bit. I hope to someday get my hands on either a P07/09. Probably the 07 for its smaller size, since it would be a carry pistol. For my body frame it is harder for me to conceal a longer slide.
I got my P01 cerakoted so I’m not concerned about the finish. Just hit the 600 rd mark and it has been flawless. I also have the P07 but haven’t spent a ton of time with it, think it has 450 rds through it, its a safe queen for now. It has had a few malfunctions but they could have been ammo related.
I am a big CZ guy and love the P-01! I am looking at the PX4 and the new Langdon Tactical SD version with and optic cut and flat trigger seems amazing.
I've heard nothing but good things about the Langdon Tactical version. I'm sure it will shoot like a dream. When it comes to Beretta and CZ, you can't go wrong with either pistol.
If you're going to do aftermarket upgrades - you go with the P01 so you can "Cajunize" it, aka upgrading the trigger, hammer, springs, short reset etc. If you're not going to do any upgrades or put another $400-600 into the gun, just go with the Px4. I mention Cajunize for P01, but this is just the term for a Cajun Gun Works build, you could technically buy a CZ Custom job too, but ultimately the idea is the same.
I've heard nothing but good reviews from Cajun Gun Works. Sounds like they can make the CZ trigger amazing. But like you say, the upgrades aren't cheap.
@@misgoldmanOh I think LTT is amazing! However, and I think this is a good thing - the PX4 doesn't really need it as much as the P01 does. A stock PX4 has a better trigger out of the box than P01.
The P-01 triggers can be pretty bad it's easy to polish up some of the contact points but the only way get rid of all the creep is by replacing the hammer with an aftermarket one.
@volbrenYT p-01 omega stock has just as good trigger as px4 stock... you can find p-01 for 550 and spend another 250 on the cajun trigger kit... that makes it an even better gun for under 900
CZ barrels don’t tilt up when they unlock from the slide. Instead, they start with the chamber higher than the muzzle - pointing down slightly, which is why the rear sight is so much higher than the front sight. When the barrel unlocks, the chamber end drops down so that the barrel becomes parallel to the slide. This helps prevent some muzzle rise during recoil, because the barrel doesn’t flip up at high speed.
You would not believe the stupidity I seen on a video earlier today. Some dude said that the CZ had a browning tilting action 🤦🏿♂️ and a whole mess of people liked it.. same with the Jericho.
So it tilts but starts from a lower angle and basically tilts to parallel? Fascinating, I appreciate the info. I could see how that would help with the angle of the recoil. Especially in conjunction with the low bore axis.
I appreciate the kind words somedayzo6. You can never be too safe when handling firearms. I enjoy going out shooting and am happy others find my videos entertaining. Take care and stay safe!
A very good review of two very nice pistols. If you were to choose one over the other for defensive carry, either would leave you "well armed," Good shooting.
Alarm! Alarm! Someone on the Internet is wrong! And that someone is you. 😉 Neither of these guns uses delayed blowback, both of them have barrel locked into the slide. Those are two different things. Simple blowback starts opening immediately and only relies on the slide inertia (and perhaps spring resistance a little, but that's usually negligible) to have enough time for the bullet to leave the barrel before too much of the cartridge case is exposed to high pressure; delayed blowback also starts to open immediately, however the slide movement is slowed by some other mechanism besides simple inertia (usually some kind of lever or rollers or gas piston &c.) whilst locked systems do not start open immediately, the barrel is locked into the slide and travels with it for some time with the chamber entirely closed, and only after unlocking it begins to open. Otherwise very nice video and thanks for it. I own CZ P-01 Ω-which has somewhat improved trigger over non-Ω version-my primary carry piece for some time, and also Grand Power P-40 (in 10 mm Auto) witch uses rotating barrel similarly to the Beretta PX4 and I like both the systems. Greetings from Prague, Czechia.
Thanks for the info Marcel! Once again I use the wrong terminology. 😅 I tried to do proper research of the terms before making the video but I guess I got it wrong anyway. I was attempting to show the differences between the more popular locking system with a tipping barrel vs. rotating. I appreciate you watching the video. I actually had the pleasure to visit Prague back in 1997 while studying for a summer in Austria. Such a beautiful city and hope to visit again someday. Take care and best wishes from Texas!
I had both guns. I ended up selling the CZ compact -- but I kept a full-size CZ75-BD. I carry the compact PX4 in my car. I have a full size in the bedroom. I have converted both to decocker only. The conversion takes 15 minutes each if you have the punches. You just remove a little ball-bearing.
Thanks for watching! The decocker conversion seems to be very popular with the PX4. And it's good to know that it's quite a simple process to change it out.
Thanks for being thorough and repeating your tests to show consistency (or lack of), especially with the triggers (weight, reset, creep). Most guns have some variance from one pull to another and I like to know the extent of the variance. Keeping in mind that each is a sample size of one for their respective models.
Very true. Some people claim that their CZ came from the factory with no creep. That has not been my experience, but like you say, I have a sample size of one. Well two if you count my SP01 that had the same creep. I suspect it will smooth out over time.
I have both the Beretta PX4 Storm Compact and the CZ P-01 Compact the Beretta is an awesome gun..but if I had to choose i would go with the CZ P-01 Omega ..I can shoot it better than my Beretta even though the Beretta has a better trigger..the CZ just has a better grip..great comparison…Take care..
Thanks for watching Alfonso! Mine does not have the Omega trigger but I agree with your assessment. The Beretta's trigger is better out of the box but you can't beat CZ's grip.
I concur, except I would (and did) choose the standard version over the Omega since its trigger can be tuned for better performance. A moot point since the Omega version (along with several other of their Omega version hammer fired guns) was discontinued last year.
@@Sirgromulus Thanks for the info! I didn't know they were discontinuing the Omega line. I thought they were also discontinuing the 527 but I still see they on their website
Trust me you wont be disappointed. For many years I was looking at CZ, but never got one. Now I see what all the hype is about. I love my P01 so much I got it cerakoted and of course shes my daily driver.
I like both of them. I would say that the one that fit your hand the best and that you could shoot the best would be my pick for carry. I recently checked out a SIG P365 X Macro with a 3.7 inch barrel, no compensator, and a 17 round magazine with the larger grip frame at my LGS. It felt amazing in my hand, slim with great grip texture, and it had a RDO and night sights included. Very tempting to me to try out.
Thanks for watching John! I agree with you completely. Always go with the pistol that feels best in your hand. In this circumstance it would be the CZ. Also love the P365 series.
Awhile back I sold I was in the market for a new gun and it was down to the CZ 75 P01 and the PX4 Storm.. It was a really hard decision. For me it came down to something silly.. I live in kansas and work in KC and the CZ has Kansas City Kansas stamped onto the slide. Between Langdon and Cajun Gun Works both guns can be made really really nice.
Thanks for watching. It is a difficult choice between the two. In the end it comes down to personal preference in the grips and controls. Like you said, both have great aftermarket support that can turn great pistols into amazing firearms.
Tough choice with these two! I love my Beretta 92X RDO Compact but between the two in your video I'm leaning towards the CZ P01, because of the all metal build, what do you think?
I'm also leaning toward the CZ P01. But not due to the all metal build. For me it is the grip that really sells that pistol. It just feels great in my hand.
On the PX4 with the Safety/Decocker, it does have somewhat of a "half-cock" position, in witch the main spring has been compressed a little. However It does not take any of the weight off from the double action trigger, it only shortens the pull. As for the CZ, if it is the decocker version (no safety), the hammer falls to the half-cock position when decocked. In the version with the manual safety, you can carry it cocked and locked.
@@texmexshoots thanks for answering. I’m purchasing my first firearm and not sure between the glock 19 or cz 75c. I hate the glock grip it’s horrid and I can’t get used to it, but the thing always works no matter what you do to it. The cz has its drawbacks like spring breaking or the rod breaking if you dry fire too much but that’s all I can think of. They’re about the same price. I like the fact that the glock is lighter because of the polymer frame but the grip is what’s holding me back.
@@wallclock4648 Honestly, you can't go wrong with either pistol. That being said, in my experience, if accuracy is important to you, then a comfortable grip will help immensely. There is also a bid difference in the trigger system used between the two. One being striker fired and the other having a hammer that shoots in single/double action. Both have their benefits and you need to pick what works best for you.
@@chadhaire1711 Thanks for watching! I'm hoping to get my hands on a full size PX at some point to compare recoil. Haven't shot a P07 yet but hear good things.
The transition between double to single takes quite a bit of practice. I shoot my p01 that way because that's the way I carry it. The grip angle on it is natural for me. I wish the grip was just a little narrower but I shoot it just fine.
Thanks for watching Chuck! I agree that the transition does take practice. That's why I always recommend to people to practice with their self defense firearm often.
I have the PX4 compact and my buddy has a P01. We have both shot each and we both love both pistols. Funny enough I shoot his P01 better than he does, and he shoots my PX4 better than I do😂
I own a PX4 Storm FS and the compact like yours in 40 cal. In my opinion the best semiautomatic handgun on the market; even better than the M92FS. The compact only hold 12+1 the fullsize is 14+1
Have had both. Both good guns. PX4 easier to upgrade. CZ grip slightly better. PX4 more durable. The CZ is not unreliable but the Beretta more reliable. The PX4 is also available in .40 & .45. I have all 3 full size Beretta calibers, decock only, with a few minor mods. I sold my P01. I carry the PX4 .40.
The decocker only models seem to be very popular. Although they make the kits to switch out the safety versions for those who have the standard models and would prefer the decocker only.
@@texmexshoots I've bought "G" models and done the conversion kit on a 92. PX4's don't require any new parts. Just remove a detent & spring and you're done. Although you might want a spare roll pin handy. And you'll need roll pin punches.
What is the failure rate of the CZ 75? The handguns passed a series of harsh tests including shooting 15.000 rounds with a failure rate of only 0,06 0,08% or an exhaustive parts interchangeability test with flying colors
I got the PX4 in January it had to grow on me yea it look different from other pistols I have & those are Springfield 45 acp the Ruger 357 magnum GP100 the Taurus 38 spl & Mossberg 12 gauge pistol grip pump action shotgun but I love my PX4!
Thanks for watching! Sounds like you have a good collection of firearms. A great revolver, shotgun and other good pistols. The PX4 is very different in look and feel from other semi-autos. Mostly due to the rotating barrel. But they are great pistols and with a little training, very accurate.
@@texmexshoots definitely bro I like it & it’s also good that the recoil is not so bad I’m teaching my wife how to shoot that next & all I need next is the Kimber 10mm 1911 & a desert eagle & I’m done!!
@@thegreatalpha5602 A Kimber 10mm and D.E. sounds like great additions. I have a D.E. that my father and I bought back in 1989. I will eventually do a video with it. It's a fun pistol to shoot!
I can certainly understand that sentiment. I love CZs, but growing up in the 80s made me really love the Beretta 92 series. Although the PX line is not as good looking as the 92s, they are good pistols with a great track record.
Thanks for watching Madd Matt! Haven't been able to see one of the green CZ P01, they must be a little more rare than the standard black. But in any color they are a great handgun.
I have both pistols. When you check the trigger pull on the CZ you have to set the hammer using the decocker because it only lowers the hammer 2/3 of the way down unlike the PX4. That should reduce the trigger pull weight and give you a more accurate measurement. Also a better comparison to the px4 would have been the P07 which is polymer not alloy lower. Lastly your grip. Put yojr support thumb higher on the slide I especially with the px4. It will help prevent pulling left.
Both are top shelf, can't go wrong. Out of the box, the nod goes to the CZ. The PX4 needs a few things (I think new released PX4s address these issues). (Edited to clarify: the main "issue" with the PX4 is the batwing safety which is needlessly wide and painful to use, and many prefer a 'decock only' over the safety. Beretta offers a slim profile and "decock only" version, which I have installed on my PX4. It's much better. In fact, apparently new model PX4s this year will eliminate some/all of these issues.)
@@texmexshoots You bet. I should clarify (and will clarify my original post); the main "issue" with the PX4 is the batwing safety which is needlessly wide and painful to use, and many prefer a 'decock only' over the safety. Beretta offers a slim profile and "decock only" version, which I have installed on my PX4. It's much better. In fact, apparently new model PX4s this year will eliminate some/all of these issues.
I stand corrected. The Desert Eagle is a rotary bolt (like an AR 15), not a rotating barrel. The barrel is actually fixed. So you may be right about the Beretta system being the only one.@@texmexshoots
@@nathanlambshead4778 Thanks for the update Nathan. That is what I remembered about the D.E. The bolt would rotate its locking lugs like an AR15. Take care and stay safe!
Both excellent, but the P01 (especially omega) is the my preference. IMO the trigger is better, and the grip is lightyears better than the PX4. That said, a Langdon Tactical variant with all the goodies, and aftermarket stippling might give the edge to the PX4, but you're talking about a $2,500 investment at that point, and I'd rather spend that money on a 4" DS 1911.
I’ve got more than 10k through my P-01. It’s stock but sights and grips for CCW. Shooting it from concealment in USPSA, you notice the pull weight. The creep and slop are irrelevant when running and gunning. The weight dropped tremendously after 6000 rounds. It’s 6.13 lbs DA, 2 42 lbs SA
@@texmexshoots Great vid. FWIW, I recommend the PX4 all the time even though I don't own one ...yet. Can only get the full size in CA right now. I'm interested in the compact. Extremely soft shooter.
@@kagyu1 Thanks Kagyu1! Hopefully you'll stumble upon a compact. I'm sure the full size is easier to shoot but the compact, like the P01, are a great size for carry.
I carry the Px4 storm compact carry.. I love the THING. Every time I shoot it at the range I do get weird looks lol. Till people shoot it then they understand
Not necessarily. The CZ would be a little narrower but the PX4 is a little shorter. However, the weight and size differences are so small that it really comes down to personal preference. If you can find a way to hold them both, I would go with the one that feels best in your hand. But you really can't go wrong with either.
The CZ has less muzzle flip because of low slide...Beretta has low flip because of rotating barrel. Now if we could just make a handgun that had BOTH features.
Hello there Mr. Jenkins. I like your Centenario! I've heard nothing but great things about the Landon Tac Version. For those who can afford it, they are certainly worth the extra money.
@@texmexshootsDry firing without a snap cap in the CZ’s are prohibited. One of the few weak links in the CZ hammer fired guns. Stellar firearm nonetheless.
I have the CZ myself and love it. Would have liked to have seen the trigger weights from the decock position. The CZ I know drops the hammer to half cock.
CZ and Beretta are two solid companies that make very good and reliable guns. You can't go wrong with both. That being said, I would choose P01, but with the omega trigger version.
Thanks for watching Manook! Both pistols are great, it does just come down to personal preference. Keep on practicing and you'll become an expert pistol shot in no time!
It takes 15 minutes to convert your PX4 to decocker only. Essentially, you remove a little ball-bearing. You just have to know how to do it. I am sure TH-cam will show you.
Constructive Criticism: All the comparison was things we can tell from pictures and reading specs. What we want from you is comparisons on the things you can only tell from having both and shooting side by side. I’d like you to be more thoughtful and reflective and less shallow.
I appreciate the advice. In the end my experiences are subjective and I'm not a competitive shooter or mechanical engineer. I'm just some guy who likes shooting and going to the range. But I will try to give a more thoughtful explanation to the differences between the firearms I compare.
The storm's trigger can be made to have one of the best you have ever used by a simple and cheap drop in trigger from LTT. Very easy to do yourself. The CZ even when upgraded by a professional will never have a trigger as good as the ltt px4 trigger. That said, i still shoot the cz better even with its terrible reset. Something about it makes it such an easy gun to shoot.
Thanks for watching Creaturecore! I've heard great things about the LTT trigger. I've never felt a Cajun CZ trigger but have heard good things about them as well. Would love to be able to compare the two.
Thanks, I appreciate you watching! The PX4 if a unique looking pistol. Somewhat futuristic. I am considering getting a P07. But I'm just not sure if I can justify the expense.
@@JahIthBer-db2ij The recoil is very even between the two, but to me, the CZ felt less jumpy in my hand. Although I think for me it has more to do with the grip and how I hold each pistol in my hand while shooting.
I’m a CZ P01 guy. Great video man thanks for the comparison
Thanks for watching Brad. Can't go wrong with the P01. Like I said in my video, the CZ grip is one of my favorite. Feels wonderful in the hand.
It's not trigger creep in the P-01, it's the hammer camming back. watch the hammer as you pull the trigger, you'll see.
When my grandson got his carry permit, I opened the safe and said, "Pick one". Of course, he picked the CZ P-01 w/Dawson night-sights and LOK Palm-Swell grips. Now I need to get another P-01.
Interesting, thanks for the info. That was a mighty generous gift to your grandson! I'm sure he appreciates it very much. But yes, you do need to replace it now. 😁
I absolutely love my CZ P01. Its one of the easiest guns I own to shoot accurately. The grip angle, low bore axis, and contouring all make it extremely comfortable and low recoiling. The all metal construction is very nice as well.
A few things to note which I learned after some time spent with my P01:
After roughly 500 rounds the trigger really begins to wear in. It becomes more consistent, smoother, and more crisp. Dry fire will help speed this process up, just keep in mind that its a good idea to pre-emptively replace the firing pin retaining pin every 1500-2000 rounds. The trick is that dry fire hammer strikes do count towards this total and should be kept track of.
A set of thin Lok G10 grips are a life changing addition to any P01. The factory rubber grips are nice but begin to move around some with age, and can be very slick when wet. The Lok G10 grips solve those problems. The textures are great and the thin profile made the longer than normal CZ length of pull much more manageable.
Mec-Gar make some of the best P01 magazines on the market and are significantly cheaper than CZ branded mags.
I've been casually eyeing a PX4 Storm Compact for quite some time now and will likely end up purchasing one soon. I love the rotating barrel design and think the PX4 Storm deserves a chance to prove itself. I will definitely have to upgrade it to a "G" model decocker only though as I believe that 99% of the time a safety has no place on a defensive EDC handgun.
Finally if you fall in love with your P01, as I expect you will, you really should check out the CZ P07/P09 as a cheaper, polymer framed, DA/SA option. After purchasing a P07 I tend to use my P01 as a weekend warrior/fair weather safe queen, and let the P07 do most of the dirty work. The P07/P09's polymer frame and more modern slide coating makes the handgun significantly more "rugged" than the P01, and if/when you do manage to damage a P07/P09; they're 20-25% cheaper than most P01s which makes the damage much easier to stomach.
Thanks for watching David! And for all the insightful information as well. I need to smooth out the trigger on my P01 a little more with some shooting. Had to do the same with my SP01. Luckily CZ provided some snapcaps with the SP01 so I was able to dry fire it quite a bit.
I hope to someday get my hands on either a P07/09. Probably the 07 for its smaller size, since it would be a carry pistol. For my body frame it is harder for me to conceal a longer slide.
I got my P01 cerakoted so I’m not concerned about the finish. Just hit the 600 rd mark and it has been flawless. I also have the P07 but haven’t spent a ton of time with it, think it has 450 rds through it, its a safe queen for now. It has had a few malfunctions but they could have been ammo related.
Pretty sure the cold hammer forged barrel helps a lot with accuracy too
I don’t have either one of these firearms. But I have owned and carried a CZ Compact PCR for years. Great gun.
Thanks for watching! The CZ PCR is a great firearm.
Two of the best handguns in the world. Incredible engineering. Thanks for sharing. Peace
Thanks for watching BaddFrogg! They are both great pistols.
P-01 all day long
Not surprised based on your profile pic. 😀Thanks for watching!
...PX4 FOR LIFE ! 🥂
I am a big CZ guy and love the P-01! I am looking at the PX4 and the new Langdon Tactical SD version with and optic cut and flat trigger seems amazing.
I've heard nothing but good things about the Langdon Tactical version. I'm sure it will shoot like a dream. When it comes to Beretta and CZ, you can't go wrong with either pistol.
If you're going to do aftermarket upgrades - you go with the P01 so you can "Cajunize" it, aka upgrading the trigger, hammer, springs, short reset etc. If you're not going to do any upgrades or put another $400-600 into the gun, just go with the Px4. I mention Cajunize for P01, but this is just the term for a Cajun Gun Works build, you could technically buy a CZ Custom job too, but ultimately the idea is the same.
I've heard nothing but good reviews from Cajun Gun Works. Sounds like they can make the CZ trigger amazing. But like you say, the upgrades aren't cheap.
you might know CZ, but you don't know Beretta....Langdon is the CGW of the Beretta world only better.
@@misgoldmanOh I think LTT is amazing! However, and I think this is a good thing - the PX4 doesn't really need it as much as the P01 does. A stock PX4 has a better trigger out of the box than P01.
The P-01 triggers can be pretty bad it's easy to polish up some of the contact points but the only way get rid of all the creep is by replacing the hammer with an aftermarket one.
@volbrenYT p-01 omega stock has just as good trigger as px4 stock... you can find p-01 for 550 and spend another 250 on the cajun trigger kit... that makes it an even better gun for under 900
CZ barrels don’t tilt up when they unlock from the slide. Instead, they start with the chamber higher than the muzzle - pointing down slightly, which is why the rear sight is so much higher than the front sight. When the barrel unlocks, the chamber end drops down so that the barrel becomes parallel to the slide. This helps prevent some muzzle rise during recoil, because the barrel doesn’t flip up at high speed.
You would not believe the stupidity I seen on a video earlier today. Some dude said that the CZ had a browning tilting action 🤦🏿♂️ and a whole mess of people liked it.. same with the Jericho.
So it tilts but starts from a lower angle and basically tilts to parallel? Fascinating, I appreciate the info. I could see how that would help with the angle of the recoil. Especially in conjunction with the low bore axis.
Very enjoyable video comparison. Appreciate your easy manner and commentary. Also kudos on the continuous safety checks and rechecks!
I appreciate the kind words somedayzo6. You can never be too safe when handling firearms. I enjoy going out shooting and am happy others find my videos entertaining.
Take care and stay safe!
A very good review of two very nice pistols. If you were to choose one over the other for defensive carry, either would leave you "well armed," Good shooting.
Well said Frank. You really can't go wrong with either pistol.
Alarm! Alarm! Someone on the Internet is wrong! And that someone is you. 😉 Neither of these guns uses delayed blowback, both of them have barrel locked into the slide. Those are two different things. Simple blowback starts opening immediately and only relies on the slide inertia (and perhaps spring resistance a little, but that's usually negligible) to have enough time for the bullet to leave the barrel before too much of the cartridge case is exposed to high pressure; delayed blowback also starts to open immediately, however the slide movement is slowed by some other mechanism besides simple inertia (usually some kind of lever or rollers or gas piston &c.) whilst locked systems do not start open immediately, the barrel is locked into the slide and travels with it for some time with the chamber entirely closed, and only after unlocking it begins to open.
Otherwise very nice video and thanks for it. I own CZ P-01 Ω-which has somewhat improved trigger over non-Ω version-my primary carry piece for some time, and also Grand Power P-40 (in 10 mm Auto) witch uses rotating barrel similarly to the Beretta PX4 and I like both the systems. Greetings from Prague, Czechia.
Thanks for the info Marcel! Once again I use the wrong terminology. 😅
I tried to do proper research of the terms before making the video but I guess I got it wrong anyway. I was attempting to show the differences between the more popular locking system with a tipping barrel vs. rotating.
I appreciate you watching the video. I actually had the pleasure to visit Prague back in 1997 while studying for a summer in Austria. Such a beautiful city and hope to visit again someday. Take care and best wishes from Texas!
I had both guns. I ended up selling the CZ compact -- but I kept a full-size CZ75-BD. I carry the compact PX4 in my car. I have a full size in the bedroom. I have converted both to decocker only. The conversion takes 15 minutes each if you have the punches. You just remove a little ball-bearing.
Thanks for watching! The decocker conversion seems to be very popular with the PX4. And it's good to know that it's quite a simple process to change it out.
Based on looks alone, I would have to go CZ here. That model Beretta is just ugly to my senses. lol Accuracy looks pretty comparable.
Thanks Buddy! You really can't go wrong with either, but I agree that the CZ wins on aesthetics. Feels better in my hand too.
@@texmexshoots CZ's are classy pistols.
The Storm is a great looking pistol. A little futuristic but it's been around 20 years.
@@barrygoodson4952 Thanks for watching Barry! You're making me feel old 😂
Thanks for being thorough and repeating your tests to show consistency (or lack of), especially with the triggers (weight, reset, creep). Most guns have some variance from one pull to another and I like to know the extent of the variance. Keeping in mind that each is a sample size of one for their respective models.
Very true. Some people claim that their CZ came from the factory with no creep. That has not been my experience, but like you say, I have a sample size of one. Well two if you count my SP01 that had the same creep. I suspect it will smooth out over time.
I have both the Beretta PX4 Storm Compact and the CZ P-01 Compact the Beretta is an awesome gun..but if I had to choose i would go with the CZ P-01 Omega ..I can shoot it better than my Beretta even though the Beretta has a better trigger..the CZ just has a better grip..great comparison…Take care..
Thanks for watching Alfonso! Mine does not have the Omega trigger but I agree with your assessment. The Beretta's trigger is better out of the box but you can't beat CZ's grip.
I concur, except I would (and did) choose the standard version over the Omega since its trigger can be tuned for better performance. A moot point since the Omega version (along with several other of their Omega version hammer fired guns) was discontinued last year.
@@Sirgromulus Thanks for the info! I didn't know they were discontinuing the Omega line. I thought they were also discontinuing the 527 but I still see they on their website
Love my P-01
Thanks for watching Marty! The P01 is a great pistol.
Thanks Tex Mex! That rotating barrel is really interesting. Loved the comparison.
Thanks Cervus!
Ugghhhh! These videos just remind me i gotta get a CZ. I already have a PX4 compact. I mean... who settles for just one epic firearm? 😁
Just trying to do my part as a firearms purchase enabler!
Trust me you wont be disappointed. For many years I was looking at CZ, but never got one. Now I see what all the hype is about. I love my P01 so much I got it cerakoted and of course shes my daily driver.
have them both , love equally but are different in function and feel, but would pick the Storm , but P-07 over both.
Thanks as always for watching! Haven't had a chance to shoot the P-07 yet. Need to try and get my hands on one.
Great comparison thanks enjoyed the video
Thanks for watching Terry! I'm glad you liked the video.
I am a CZ fan. The PX4 Storm is the only non-CZ pistol I would consider.
They are both great pistols in their own way. You can't go wrong with either.
I like both of them. I would say that the one that fit your hand the best and that you could shoot the best would be my pick for carry. I recently checked out a SIG P365 X Macro with a 3.7 inch barrel, no compensator, and a 17 round magazine with the larger grip frame at my LGS. It felt amazing in my hand, slim with great grip texture, and it had a RDO and night sights included. Very tempting to me to try out.
Thanks for watching John! I agree with you completely. Always go with the pistol that feels best in your hand. In this circumstance it would be the CZ. Also love the P365 series.
Awhile back I sold I was in the market for a new gun and it was down to the CZ 75 P01 and the PX4 Storm.. It was a really hard decision. For me it came down to something silly.. I live in kansas and work in KC and the CZ has Kansas City Kansas stamped onto the slide. Between Langdon and Cajun Gun Works both guns can be made really really nice.
Thanks for watching. It is a difficult choice between the two. In the end it comes down to personal preference in the grips and controls. Like you said, both have great aftermarket support that can turn great pistols into amazing firearms.
Tough choice with these two! I love my Beretta 92X RDO Compact but between the two in your video I'm leaning towards the CZ P01, because of the all metal build, what do you think?
I'm also leaning toward the CZ P01. But not due to the all metal build. For me it is the grip that really sells that pistol. It just feels great in my hand.
I own a CZ p01 because it's a NATO Certified Handgun. Excellent shooter no jams or misfeeds on it.
Hey there Nachos! I didn't realize it was NATO certified. Thanks for the info.
The PX4 Storm is also NATO certified btw
@@Josh-bu4zx Good to know. Thanks Josh!
Two of my favorite pistols 😍
Thanks 👍
Thanks for watching Bob! They are both great pistols.
Does the Px4 have the half-cock position like the CZ?, also can the CZ be put in safety at the half-cock position?
On the PX4 with the Safety/Decocker, it does have somewhat of a "half-cock" position, in witch the main spring has been compressed a little. However It does not take any of the weight off from the double action trigger, it only shortens the pull.
As for the CZ, if it is the decocker version (no safety), the hammer falls to the half-cock position when decocked. In the version with the manual safety, you can carry it cocked and locked.
@@texmexshoots thanks for answering. I’m purchasing my first firearm and not sure between the glock 19 or cz 75c. I hate the glock grip it’s horrid and I can’t get used to it, but the thing always works no matter what you do to it. The cz has its drawbacks like spring breaking or the rod breaking if you dry fire too much but that’s all I can think of. They’re about the same price. I like the fact that the glock is lighter because of the polymer frame but the grip is what’s holding me back.
@@wallclock4648 Honestly, you can't go wrong with either pistol. That being said, in my experience, if accuracy is important to you, then a comfortable grip will help immensely. There is also a bid difference in the trigger system used between the two. One being striker fired and the other having a hammer that shoots in single/double action. Both have their benefits and you need to pick what works best for you.
@@texmexshoots screw it, I’ll get both
@@wallclock4648 That is always the correct answer! 😁
I've got a PX4 and a CZ P-07. Asking me to choose between them is like asking a mother to choose between her Fraternal twins.
I haven't been able to shoot a P-07 yet. Would love to be able to compare it to the P-01
CZ has low muzzle flip but more recoil......PX is easier to shoot. Po7 is great in 40 cal though
@@chadhaire1711 Thanks for watching! I'm hoping to get my hands on a full size PX at some point to compare recoil. Haven't shot a P07 yet but hear good things.
The transition between double to single takes quite a bit of practice. I shoot my p01 that way because that's the way I carry it. The grip angle on it is natural for me. I wish the grip was just a little narrower but I shoot it just fine.
Thanks for watching Chuck! I agree that the transition does take practice. That's why I always recommend to people to practice with their self defense firearm often.
I have the PX4 compact and my buddy has a P01. We have both shot each and we both love both pistols. Funny enough I shoot his P01 better than he does, and he shoots my PX4 better than I do😂
Isn't that just how it would be?! 😄 Thanks for watching.
Excellent video!!!!
Thank you!
Both great firearms but the P01 is perfect for me and my EDC needs.
Thanks for watching Allan! I love the P01. Its grip fits my hand perfectly.
I own a PX4 Storm FS and the compact like yours in 40 cal. In my opinion the best semiautomatic handgun on the market; even better than the M92FS. The compact only hold 12+1 the fullsize is 14+1
Thanks for watching Plaga Killer! I haven't had a chance to shoot the Px4 in 40, but I but I'm sure it does well with that cartridge.
Have had both. Both good guns. PX4 easier to upgrade. CZ grip slightly better. PX4 more durable. The CZ is not unreliable but the Beretta more reliable. The PX4 is also available in .40 & .45. I have all 3 full size Beretta calibers, decock only, with a few minor mods. I sold my P01. I carry the PX4 .40.
The decocker only models seem to be very popular. Although they make the kits to switch out the safety versions for those who have the standard models and would prefer the decocker only.
@@texmexshoots I've bought "G" models and done the conversion kit on a 92. PX4's don't require any new parts. Just remove a detent & spring and you're done. Although you might want a spare roll pin handy. And you'll need roll pin punches.
@@josephpepper3087 Thanks for the info!
What is the failure rate of the CZ 75?
The handguns passed a series of harsh tests including shooting 15.000 rounds with a failure rate of only 0,06 0,08% or an exhaustive parts interchangeability test with flying colors
Get the Langdon trigger bar. You’ll thank me later.
Gotta love the 40 bashers for driving down prices. More ice cream for us.
p01 my first gun. i get a lot of compliments for it. its legal in california too.
Thanks for watching. You started out with a great pistol!
I got the PX4 in January it had to grow on me yea it look different from other pistols I have & those are Springfield 45 acp the Ruger 357 magnum GP100 the Taurus 38 spl & Mossberg 12 gauge pistol grip pump action shotgun but I love my PX4!
Thanks for watching! Sounds like you have a good collection of firearms. A great revolver, shotgun and other good pistols. The PX4 is very different in look and feel from other semi-autos. Mostly due to the rotating barrel. But they are great pistols and with a little training, very accurate.
@@texmexshoots definitely bro I like it & it’s also good that the recoil is not so bad I’m teaching my wife how to shoot that next & all I need next is the Kimber 10mm 1911 & a desert eagle & I’m done!!
@@thegreatalpha5602 A Kimber 10mm and D.E. sounds like great additions. I have a D.E. that my father and I bought back in 1989. I will eventually do a video with it. It's a fun pistol to shoot!
You are well armed either way. Ergonomics, looks, aftermarket and cool factor go to the CZ.
Thanks for watching James! I agree, you can't go wrong with either pistol.
I’m a CZ guy all the way, but I do want to own a Beretta.
I can certainly understand that sentiment. I love CZs, but growing up in the 80s made me really love the Beretta 92 series. Although the PX line is not as good looking as the 92s, they are good pistols with a great track record.
I have a green CZ P 01. It's a very good handgun.
Thanks for watching Madd Matt! Haven't been able to see one of the green CZ P01, they must be a little more rare than the standard black. But in any color they are a great handgun.
Most people who are fans of one of these are fans of the other.
Very true gutblaster! Both are great pistols.
I’m a Cz guy and recently just ordered this px4. Your comment couldn’t have been anymore accurate because I love them both
@@_WillieB Thanks for watching Patrick! Congrats on your new PX4.
Good comparison. 👍
Thanks Todd! I'm glad you liked it.
Love my Beretta 92X and my PX4 wife love her CZ.
I'd love to test a Beretta 92X. I bet she is a delight to shoot. Thanks for watching!
If the PX4 wasn’t , I’d me more interested. But, as it is….P01 would be my preference. But as you said, they are quite comparable.
You really can't go wrong with either. Thanks for watching!
@@texmexshoots kinda how I see it! Talk about a win win situation!
The comparison should’ve been between the P-07 vs PX4
Yeah, that's fair. Unfortunately I do not presently own or have access to a P07
The PX4 is a lot sexier than the other polymer beretta (APX). Both handguns on this video are gorgeous.
Thanks Ride On Time! I agree that the PX4 is a lot better looking than the APX. Both Beretta and CZ know how to make some good looking firearms.
I have both pistols. When you check the trigger pull on the CZ you have to set the hammer using the decocker because it only lowers the hammer 2/3 of the way down unlike the PX4. That should reduce the trigger pull weight and give you a more accurate measurement. Also a better comparison to the px4 would have been the P07 which is polymer not alloy lower.
Lastly your grip. Put yojr support thumb higher on the slide I especially with the px4. It will help prevent pulling left.
Thanks for watching Alex! I appreciate the advice.
Both are top shelf, can't go wrong. Out of the box, the nod goes to the CZ. The PX4 needs a few things (I think new released PX4s address these issues). (Edited to clarify: the main "issue" with the PX4 is the batwing safety which is needlessly wide and painful to use, and many prefer a 'decock only' over the safety. Beretta offers a slim profile and "decock only" version, which I have installed on my PX4. It's much better. In fact, apparently new model PX4s this year will eliminate some/all of these issues.)
Thanks for watching Tim! I was unaware of any issues with the PX4. I need to do some research
@@texmexshoots You bet. I should clarify (and will clarify my original post); the main "issue" with the PX4 is the batwing safety which is needlessly wide and painful to use, and many prefer a 'decock only' over the safety. Beretta offers a slim profile and "decock only" version, which I have installed on my PX4. It's much better. In fact, apparently new model PX4s this year will eliminate some/all of these issues.
@@timsimmons9995 Understood. Thanks again for the info!
Well executed video. Worth the time. PS the Magnum Research Desert Eagle has a rotating barrel also. Just fyi.
Thanks for the kind words Nathan. I appreciate you watching. Didn't know that about the Desert Eagle. Need to go check one out.
I stand corrected. The Desert Eagle is a rotary bolt (like an AR 15), not a rotating barrel. The barrel is actually fixed. So you may be right about the Beretta system being the only one.@@texmexshoots
@@nathanlambshead4778 Thanks for the update Nathan. That is what I remembered about the D.E. The bolt would rotate its locking lugs like an AR15.
Take care and stay safe!
Both excellent, but the P01 (especially omega) is the my preference. IMO the trigger is better, and the grip is lightyears better than the PX4. That said, a Langdon Tactical variant with all the goodies, and aftermarket stippling might give the edge to the PX4, but you're talking about a $2,500 investment at that point, and I'd rather spend that money on a 4" DS 1911.
Thanks for watching Bryant. I think that is a good assessment of the pros and cons of both pistols. Take care and stay safe.
I’ve got more than 10k through my P-01. It’s stock but sights and grips for CCW. Shooting it from concealment in USPSA, you notice the pull weight. The creep and slop are irrelevant when running and gunning.
The weight dropped tremendously after 6000 rounds. It’s 6.13 lbs DA, 2 42 lbs SA
Thanks for watching Kagyu1! You've certainly put a lot of rounds through your P01! Thanks for letting us know how your trigger has improved over time.
@@texmexshoots Great vid. FWIW, I recommend the PX4 all the time even though I don't own one ...yet. Can only get the full size in CA right now. I'm interested in the compact. Extremely soft shooter.
@@kagyu1 Thanks Kagyu1! Hopefully you'll stumble upon a compact. I'm sure the full size is easier to shoot but the compact, like the P01, are a great size for carry.
2 fine top shelf guns.
That's right Mary! Thanks for watching.
CZ are gorgeous and this one is even more but Berry to me.
I agree. CZ makes some beautiful pistols. Very sleek with nice contours.
I loved also Tanfoglio clones, the TZ Series, especially the unlucky .41 Cinderella: the GT41 Pitbull.
I want the px4 compact carry 2 AND a CZ p-01 in OD green. But that’s just me 😅
The best response is always “why not get both!“ 😁
I was looking for this video thats wild
Glad to have posted it just in time! Thanks for watching.
Cz if my life depends on it! Carry one every day
Thanks for watching Kevin. CZ makes good stuff! Wish I had known about them decades ago when you could get some of their models dirt cheap.
I've had many different guns in the last 30 years and my p01 has never had a malfunction, 1000 to 1500 rounds , most reliable handgun I've owned
I already own a Stoeger Cougar which is basically a PX4. So I would choose the CZ
The Cougar is a really cool looking pistol. Still surprised they didn't catch on more when Beretta was making them.
I carry the Px4 storm compact carry.. I love the THING. Every time I shoot it at the range I do get weird looks lol. Till people shoot it then they understand
Thanks for watching Naraku! The PX4 Compact Carry is one of the best PX4 offerings.
Does either have the advantage when it comes to concealment? IWB appendix in particular.
Not necessarily. The CZ would be a little narrower but the PX4 is a little shorter. However, the weight and size differences are so small that it really comes down to personal preference. If you can find a way to hold them both, I would go with the one that feels best in your hand. But you really can't go wrong with either.
Thank you. Going to check out both this weekend.
My advice it get both
And that there is the right answer.
The CZ has less muzzle flip because of low slide...Beretta has low flip because of rotating barrel. Now if we could just make a handgun that had BOTH features.
I did see on "Forgotten Weapons" a video on the Glock 46 which is made for some German PD contracts that has a rotating barrel.
Px4 compact Carry. It’s the Landon tactical version 😎
Hello there Mr. Jenkins. I like your Centenario! I've heard nothing but great things about the Landon Tac Version. For those who can afford it, they are certainly worth the extra money.
I love my 92fs, and Beretta. But for compact? P01 hands down! So much better. The original cougar was better than the px series.
Not sure why my responses to you keep disappearing, but I am a big fan of the old cougars as well. Had one in 40s&w and wish I had gotten one in 9mm.
Px4 4 ever
Thanks for watching Lorenzo!
Is there a recoil difference?
Thanks AlecuSs93. To me the CZ feels a little better as far as recoil goes. But it isn't anything major.
Beretta. Better gripping surface on the slide, unique rotating barrel, stronger firing pin.
Is the firing pin stronger? Was unaware, but to be fair I never researched the metallurgy or construction of the firing pin or other components.
@@texmexshootsDry firing without a snap cap in the CZ’s are prohibited. One of the few weak links in the CZ hammer fired guns. Stellar firearm nonetheless.
@@maxfit68906 Good to know! I had my suspicion since my SP01 came with CZ snap caps in the case. Don't recall if the P01 came with some as well.
Grand power dose this with one of their pistols, although the name escapees me right now😅
Interesting! I just checked out their website. Never heard of them before.
That Beretta is the worst gun I've ever shot vs. CZ P01 which is the best gun I've ever shot. This is no contest for me. CZ wins 11/10 times
Thanks for watching. So you really hated the PX4? What was your major complaint with it? The P01 is an amazing pistol.
I’d disagree. I don’t think that there is a gun out there that shoots flatter than a Px4 9mm.
I have the CZ myself and love it. Would have liked to have seen the trigger weights from the decock position. The CZ I know drops the hammer to half cock.
Thanks for watching Will! Sorry I didn't think to do that particular trigger weight.
Try SQUEEZING YOUR LITTLE FINGER AND SECOND FINGER SUPER TIGHT IT WILL HELP LOCK UP YOUR WRIST , TO BOUNCY
Thanks for watching! I'll give it a try next time I'm at the range.
The Bond Arms Bullpup 9 ...... Rotating barrel and loads like a cannon!
Thanks for the info Jolo! I bet it feels like a cannon too!
@@texmexshootsBullpup Feels great. excellent firearm
Both are great guns but the PX4 is a bit bulky. If you're carrying for long periods of time the CZ is going to be more comfortable.
Thanks for watching Kagemucha08! I will agree that the PX4 is a thicker girl than the CZ P01.
👍👍
Thanks for watching!
CZ P01 for the win
CZ makes great firearms. Thanks for watching Cliff!
CZ and Beretta are two solid companies that make very good and reliable guns. You can't go wrong with both. That being said, I would choose P01, but with the omega trigger version.
Thanks for watching Adam! Well said. You really can't go wrong with either. Comes down to personal preference.
I've shot both these guns, I like the CZ outlook but I shot better with the Beretta.
But that's just me and I'm not the best shot with 9mm semi. Yet.😅
Thanks for watching Manook! Both pistols are great, it does just come down to personal preference. Keep on practicing and you'll become an expert pistol shot in no time!
@@texmexshoots Thanks a lot for the video.
They help people a lot.
U really don't need a kit to change it to decock only, just have to go in there and remove a ball detent
Thanks for the info Dallasdeadeye! That's good to know.
P01 anyday
Can't go wrong with the P01!
It takes 15 minutes to convert your PX4 to decocker only. Essentially, you remove a little ball-bearing. You just have to know how to do it. I am sure TH-cam will show you.
Thanks for the info Weissrw1!
Constructive Criticism: All the comparison was things we can tell from pictures and reading specs. What we want from you is comparisons on the things you can only tell from having both and shooting side by side. I’d like you to be more thoughtful and reflective and less shallow.
I appreciate the advice. In the end my experiences are subjective and I'm not a competitive shooter or mechanical engineer. I'm just some guy who likes shooting and going to the range. But I will try to give a more thoughtful explanation to the differences between the firearms I compare.
Beretta, if I my life depends on it.
Thanks for watching Capitan! Can't go wrong with Beretta. They make quality and beautiful firearms.
CZ
@@OmarGonzalez-gx1ks I should probably be tallying votes 😁 Thanks for watching!
The P01 is literally one of the most reliable pistols ever made
@@texmexshoots I just bought the Beretta...😀
Stoeger is a Beretta owned company
Makes sense! Thanks for watching and for the info Kevin.
CZ 75 Compact any day
Thanks for watching bloody crepe. The CZ 75 is an amazing pistol.
要一个
希望你能找到一个！
No need to show trigger creep 3 times !
Worst part is I forgot to show the reset on the PX4.
Beretta is for male ballet dancers
I'm not sure how to respond to that Rafe. 😆
@7:54 ugliest gun i ever seen, im a cz guy though jericho 941 looks way better. Wtf this gun looks fugly.
Thanks for watching! I love the Jericho too. Just wish it wasn't so heavy. Although the weight makes it very soft to shoot.
Cz way better looks. Px4 way better gun.
Thanks for watching Grantog! I will agree that they both have great qualities.
Glock 46
You're not the first to make that suggestion. Glocks are great and reliable handguns.
Beretta
Beretta makes great stuff!
For me the beretta is to ugly to take serious. If you have never shot a p-01, you have missed out on something special.
There is certainly something to be said about the aesthetics of a pistol.
We dont care about watching thw BS safety checks. YOU should no the gun is safe before you start the video.
I understand what you are getting at FlattieDaddy, but it is instinct for me to continuously check the condition of the firearm. Thanks for watching!
The storm's trigger can be made to have one of the best you have ever used by a simple and cheap drop in trigger from LTT. Very easy to do yourself. The CZ even when upgraded by a professional will never have a trigger as good as the ltt px4 trigger. That said, i still shoot the cz better even with its terrible reset. Something about it makes it such an easy gun to shoot.
Thanks for watching Creaturecore! I've heard great things about the LTT trigger. I've never felt a Cajun CZ trigger but have heard good things about them as well. Would love to be able to compare the two.
Looks like you’re pretty dangerous with both! Lol. Nice vid. Thank you.
Thanks! I'm glad you enjoyed the video. They are great pistols.
px4 looks weird, somehow can not forget its shape in my mind, I think it can compare with p 07. nice video!
Thanks, I appreciate you watching! The PX4 if a unique looking pistol. Somewhat futuristic. I am considering getting a P07. But I'm just not sure if I can justify the expense.
I used to own a full-size PX4
It was a tack driver.
For some reason the reply I made 4 days ago disappeared. I would like to shoot a full size at some point to feel the difference between the compact.
Which one shoots flatter?
Since they both have similar barrel size, the ballistics/trajectory should be the same out of both pistols.
@@texmexshoots Is recoil comparable? Could you say which was less jumpy?
@@JahIthBer-db2ij The recoil is very even between the two, but to me, the CZ felt less jumpy in my hand. Although I think for me it has more to do with the grip and how I hold each pistol in my hand while shooting.
Im sure the berreta is a fine handgun but man its fugly 😅
Beauty is in the eye of the beholder.😁
I tried many weapons. best beretta px4
Thanks for watching! Beretta makes some fine firearms.
PX4CC FTW. Again.
The Concealed Carry is a great pistol. Thanks again for watching!