Thank you so much for deeply defined really I was confused when I connected in a very simple circuit I wanna glow 1led with 3v it's project for school level but I could not connect this tectile switch because this switch was confusing me because of its four legs now concept cleared 💯👍😇
every device with these tactile switches are sooner or later but always a problem! these switches should be redesigned for an easy contact liquid access.
This type is used in our compressor interface for start and stop. Is there any way stop auto after 1hr automaticall. Can we do any thing at this tactical switch.please guide me
PIyush, could you please suggest how to get this switch working in constant - and constant off mode?i.e. push button - led is on, push the button ones more - led is off.Are there any integral schemes for this purpose?
If you will use these switch directly for switching on the LED or any other electronics/electrical things it will conduct electricity until you are pressing it, it is like press to work switch. These switch are programmed with ICs to work for signalling the IC only rest of work (to keep the things on/off) depends upon the programming inside the IC which was decided by a programmer how he want that particular device to be act.
You could use the paired terminals as 1 terminal, after which you will get a 2 terminal switch. If you are unable to get/understand the 1 method, then please place the switch on the same place of the control panel PCB I mean just solder it to the place from where you have taken it out, polarity doesn't matter in this case.
Zhejiang Yibao Technology Co., Ltd. is a professional enterprise engaged in the design, development and manufacture of electronic and electrical switches, micro-motor accessories and precision molds. It was founded in 1998. The products produced are widely used in household appliances, auto parts, office equipment, Internet of Things, medical instruments, measuring instruments, industrial control equipment, etc. The company has a registered capital of 50 million yuan, and has passed ISO9001, ISO14001, IATF16949 quality and environmental management system certification; products have been recognized by internationally renowned safety agencies, and obtained UL, KEMA, TUV, ENEC, KC, CQC, CE and other certifications. Now it has become a supplier and strategic partner of many world-renowned brands. We sincerely serve every customer with professional design, stable quality, reasonable price and fast delivery!
hello sir.. i have a one question.. if my curcuit has a tactile button switch for on/off functuon.. ..so..can i solder this points..with wire.and can we use another type of switch for on /off perpose.. can we use any other physical switch or button? instead of tactile button.?
Yes definitely you can replace it from from the normal switch/button. If you you got the understanding of the internal connection of tactile switch, you could able to create the connection with normal switch.
Well done my bro.. liked & supported.. I want to ask.. what is the technical name of the 4 leg switch when you push once-led glows dim, push twice-led glows bright, push thrice-led shuts off? I need the name to search and order it in Amazon. I'm not an electrical engeneer so I don't know the name.. plz help out.
its know as Tactile Switch (you can try searching on google with this name) result from google: Q. What is a tactile switch A. Tactile Switches are an electromechanical device used to start or stop current flow along a circuit. Devices in this family are often very small and are turned on or off through the use of an actuator that is depressed into the unit's body.
Thanks for uploading this internal mechanism of this momentary or tactile switch. I needed tht . Now I will repair one of my instruments. Thanks again. :-)
Aapka bahut bahut shukriya. Agar aapko kisi aur cheezon ke bare me video chaiye to app comment me likh ke bataiye....main kossis karunga ki use bhi main video ke roop me aap logon ke samne laa sakun.
In general use you could use any of the 4 or 2 terminal switch, both will fulfill your need for single triggering. 4 terminals switch are majorly used in PCB to create 2 triggering instance. Means in one press 2 trigger will occur even without a small delay.
is there such a thing as an eye on off switch as small as one of these tactile switches?. I do not want a momentary oh, I want an on-off switch but the on off switches that I see are a bit bigger.
check this out: www.amazon.in/TPS-Mini-Switch-Electronic-Circuit/dp/B01I1DVIPS/ref=asc_df_B01I1DVIPS/?tag=googleshopdes-21&linkCode=df0&hvadid=397082856683&hvpos=1o2&hvnetw=g&hvrand=10781843500288446600&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1007765&hvtargid=pla-318881849439&psc=1
generally these switches get corroded after a long time of use, especially during rainy season or in damp climate. So it might be possible, if it does make a click sound while pressed, then 90% chances is that it got corroded. Means all the mechanism and the other things might be working properly, however the current is not passing through just because of the corrosion. You could try cleaning the bulged metallic plate(as in the video) which is responsible of the connection when get pressed. Caution: Do it at your on risk. It may cause harm to you product/gadget/appliances.
Tactile switch are the small switch used for low voltage operations or in the electronics gadgets. It is even used in electrical gadgets but in low voltage usage section. Electronics device - Domestic/home router - reset switch Electrical appliance - Induction stove - sending a small signal to trigger/turn on the appliance(induction stove). Momentary switch deals with high voltage, on/off switch in water pump driver board. Most of the time it is being used in electrical circuits, it bigger in size and could be assessed easily.
Wow sir amazing..now by your video and your explanations in the comments cleared about very small doubts about push button(tactile switch).. Now my mind has a clear picture about working of switch ..and of course we can connect two circuits with this push button if they use same amount of voltage in their circuits..otherwise two circuits will short I think haha..am I right?? BTW two birds one shot.. Thank you for the clear explanation sir..
if the tactile is working but only when pressed very hard ...would this suggest dirt that only needs to be cleaned out or is it something more serious?
@@zazz63 Better to replace the switch with a better quality of Tectile switch (any way these switches are very cheap). Mostly when moister in the air got increased then it forms an oxide layer on the metallic surface , which we can say corrosion in this case. So its totally depends on the property of metal lying inside the switch, that how reactive is it, when got exposed with moist atmosphere/air.
Thank you very much! I was able to open the switch on one 8bitdo controller i had and fixed the shoulder button that wasn't clickng anymore. Thank you a lot.
Hi Arell, It very simple, BTW this a switch so there is no polarity, hence you need to check the shorted pins (pins which are connected internally). You could check it in 2 ways: 1. using an LED and a battery - connect it with any 2 pins one by one if the LED glows without pressing the switch...then those 2 terminals (pins) are shorted internally. and off course no need to check other 2(which will be definitely a shorted terminals once you find any shorted terminal for the first time). 2. Use multimeter continuity check method to figure out the shorted pins. Hope you got it now.
![[🔴LIVE] งานประกาศรางวัล MAYA TV AWARDS 2024 : มายามหาชน](http://i.ytimg.com/vi/nwmWYXXVwBY/mqdefault.jpg)
Great video and explanation on how tactile switch works. Thank you so much for posting this.
Thank you so much for your valuable feedback 😊
Please let me know if you would like to recommend anything similar for my next video..!
Would be good to see different types of tactile function switches. Like on-off, off-on, on-off-on…etc. You have a good presentation here.
Thanks for you valuable comment, sure I will make a video on different types of relay switches and try to cover other switches as well 🙂
By this video i am saved by my teacher hads off to you sir
THANK YOU SO MUCH! I'VE BEEN LOOKING FOR A VIDEO LIKE THIS FOR FOREVER! THANK YOU!
Perfect, just what I was looking for. Now to find a source for a switch of this type for my Neato robot vac.
Sounds awesome.....🤘🤖
Thanks, a big help in my understanding of how to test my the horn button that is not working on my motorcycle.
Welcome, and thanks for your valuable comment.
Thank you so much for deeply defined really I was confused when I connected in a very simple circuit I wanna glow 1led with 3v it's project for school level but I could not connect this tectile switch because this switch was confusing me because of its four legs now concept cleared 💯👍😇
Glade it helped you. Thanks you so much for you valuable comment.. :-)
@@PiyushPrasoon most welcome bro,,😊♥️😇
Thankyou very much i was very confused
Thanks sir. It is what i am looking for. How mechanical work for this switch. Good video.👍
You could call me Piyush.
Glade it helped you, thanks for your valuable comment.. :-)
Excellent video !
very good, it's clearly explain the mechanism, thank you :-)
I was going to tear one apart, but thought I may as well not waste one cause there is probably someone else who has done it online.
every device with these tactile switches are sooner or later but always a problem! these switches should be redesigned for an easy contact liquid access.
This type is used in our compressor interface for start and stop.
Is there any way stop auto after 1hr automaticall. Can we do any thing at this tactical switch.please guide me
There are several alternatives to auto stop. One of the easiest ways is to use 555 timer IC
Can we directly change tact switch to self lock push button switch ?
Offcource you can, however it will definitely going to affect the functionality of the device.
Thanks Piyush!
Very good. Thank you.
Thanks v much indeed
Thank you
Nice one
Thanks man!Helped a lot!!!
Glad to know it helped you. BTW thanks for the comment.
Thank you very much.
You are always welcome..!!
PIyush, could you please suggest how to get this switch working in constant - and constant off mode?i.e. push button - led is on, push the button ones more - led is off.Are there any integral schemes for this purpose?
If you will use these switch directly for switching on the LED or any other electronics/electrical things it will conduct electricity until you are pressing it, it is like press to work switch.
These switch are programmed with ICs to work for signalling the IC only rest of work (to keep the things on/off) depends upon the programming inside the IC which was decided by a programmer how he want that particular device to be act.
Thank you for your answer, I would like to share my discoveries regarding my question.
On-off function can be made using Ne555 or CD4013 chips.
How to fix it , if it can't make the circuit closed by connecting two terminal even after pressing it ?
You could use the paired terminals as 1 terminal, after which you will get a 2 terminal switch.
If you are unable to get/understand the 1 method, then please place the switch on the same place of the control panel PCB I mean just solder it to the place from where you have taken it out, polarity doesn't matter in this case.
Can this be bypassed this and directly turn on the appliance?
yes you could use it to trigger single appliance as well
@@PiyushPrasoon thanks every thing was on point i just bypassed thanks again ❤️
@@sabeehahmed8534 Happy to hear that......!!!and welcome..!
How to identify a,b,c,d it look 4 pin equal
you can check it with multimeter or else if you know the pin orientation you could able to figure it out without checking it.
69k views. 👍 nice
Zhejiang Yibao Technology Co., Ltd. is a professional enterprise engaged in the design, development and manufacture of electronic and electrical switches, micro-motor accessories and precision molds. It was founded in 1998. The products produced are widely used in household appliances, auto parts, office equipment, Internet of Things, medical instruments, measuring instruments, industrial control equipment, etc.
The company has a registered capital of 50 million yuan, and has passed ISO9001, ISO14001, IATF16949 quality and environmental management system certification; products have been recognized by internationally renowned safety agencies, and obtained UL, KEMA, TUV, ENEC, KC, CQC, CE and other certifications. Now it has become a supplier and strategic partner of many world-renowned brands.
We sincerely serve every customer with professional design, stable quality, reasonable price and fast delivery!
Very good
hello sir..
i have a one question..
if my curcuit has a tactile button switch for on/off functuon..
..so..can i solder this points..with wire.and can we use another type of switch for on /off perpose..
can we use any other physical switch or button? instead of tactile button.?
Yes definitely you can replace it from from the normal switch/button. If you you got the understanding of the internal connection of tactile switch, you could able to create the connection with normal switch.
Yes, but keep in mind these tactile switches are momentary. Must use same type in a different style.
'
that push switch is a always noise click click click..
not good...
better rather use a quiet silent push switch
the more u know
Well done my bro.. liked & supported.. I want to ask.. what is the technical name of the 4 leg switch when you push once-led glows dim, push twice-led glows bright, push thrice-led shuts off?
I need the name to search and order it in Amazon. I'm not an electrical engeneer so I don't know the name.. plz help out.
its know as Tactile Switch (you can try searching on google with this name)
result from google:
Q. What is a tactile switch
A. Tactile Switches are an electromechanical device used to start or stop current flow along a circuit. Devices in this family are often very small and are turned on or off through the use of an actuator that is depressed into the unit's body.
Thanks good
Thanks for uploading this internal mechanism of this momentary or tactile switch. I needed tht . Now I will repair one of my instruments.
Thanks again. :-)
Thank you!!! This video helped me out ALOT!!
0:57 : Actually THIS HELPED ME ALOT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks you for the information I needed :)
very good, it's clearly explain the mechanism, thank you :-)
thank u sir
Thank you very much
sir aap bahut ache se batate ho
Aapka bahut bahut shukriya.
Agar aapko kisi aur cheezon ke bare me video chaiye to app comment me likh ke bataiye....main kossis karunga ki use bhi main video ke roop me aap logon ke samne laa sakun.
@@PiyushPrasoon kya ek bar aap muje bhi dekhoge
@@ApsKiDuniya Bilkul, aap mujhe twitter pe direct message kijiye, hum waha banki ki baten karte hain.
Twitter link: twitter.com/prasoontech
Use some gloves man...
Yeah, I will. its spoiling my hand. Thanks of your heartily recommendation and your valuable comment. :-)
Thanks for this video. So seems like there is no difference between 4 vs 2 terminal switch correct? Any idea why to use one or the other?
In general use you could use any of the 4 or 2 terminal switch, both will fulfill your need for single triggering. 4 terminals switch are majorly used in PCB to create 2 triggering instance. Means in one press 2 trigger will occur even without a small delay.
Thank you for making the video. Great help.
I don't like this because I want to know how metallic plate connect two terminal.?
watch the video after 2:39 you will get it.
is there such a thing as an eye on off switch as small as one of these tactile switches?. I do not want a momentary oh, I want an on-off switch but the on off switches that I see are a bit bigger.
check this out:
www.amazon.in/TPS-Mini-Switch-Electronic-Circuit/dp/B01I1DVIPS/ref=asc_df_B01I1DVIPS/?tag=googleshopdes-21&linkCode=df0&hvadid=397082856683&hvpos=1o2&hvnetw=g&hvrand=10781843500288446600&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1007765&hvtargid=pla-318881849439&psc=1
Although,I do have the same switch, it makes the click sound when I push. Could it still be broken ?
generally these switches get corroded after a long time of use, especially during rainy season or in damp climate.
So it might be possible, if it does make a click sound while pressed, then 90% chances is that it got corroded. Means all the mechanism and the other things might be working properly, however the current is not passing through just because of the corrosion. You could try cleaning the bulged metallic plate(as in the video) which is responsible of the connection when get pressed.
Caution: Do it at your on risk. It may cause harm to you product/gadget/appliances.
What's the difference between tactile and momentary switches..?
Tactile switch are the small switch used for low voltage operations or in the electronics gadgets. It is even used in electrical gadgets but in low voltage usage section.
Electronics device - Domestic/home router - reset switch
Electrical appliance - Induction stove - sending a small signal to trigger/turn on the appliance(induction stove).
Momentary switch deals with high voltage, on/off switch in water pump driver board. Most of the time it is being used in electrical circuits, it bigger in size and could be assessed easily.
Piyush I need help...
Please do post your issue. If need more assistance message me on twitter.
Twitter Link: twitter.com/prasoontech
Wow sir amazing..now by your video and your explanations in the comments cleared about very small doubts about push button(tactile switch).. Now my mind has a clear picture about working of switch ..and of course we can connect two circuits with this push button if they use same amount of voltage in their circuits..otherwise two circuits will short I think haha..am I right??
BTW two birds one shot..
Thank you for the clear explanation sir..
You are always welcome....!
The example you have given, depicts that you got it very very clearly.....!!!!
BTW nice example .........!!! keep it up.
@@PiyushPrasoon thank u sir 😊
bhag
Thank You Very Very Much... Excellent Video!
Thank you so much for you valuable comment and the appreciation.
Thank you brother. 🤩
My pleasure
if the tactile is working but only when pressed very hard ...would this suggest dirt that only needs to be cleaned out or is it something more serious?
You are right, this mostly happens due to corrosion and some short of layer formation on the metallic contact.
@@PiyushPrasoon ..but do you think corrosion is something to be remedied or does it normally mean a complete switch replacement?
@@zazz63 Better to replace the switch with a better quality of Tectile switch (any way these switches are very cheap).
Mostly when moister in the air got increased then it forms an oxide layer on the metallic surface , which we can say corrosion in this case.
So its totally depends on the property of metal lying inside the switch, that how reactive is it, when got exposed with moist atmosphere/air.
Thank you very much! I was able to open the switch on one 8bitdo controller i had and fixed the shoulder button that wasn't clickng anymore. Thank you a lot.
How to find out which one Pin A, Pin B, Pin C and Pin D, can you help me,
Hi Arell,
It very simple, BTW this a switch so there is no polarity, hence you need to check the shorted pins (pins which are connected internally).
You could check it in 2 ways:
1. using an LED and a battery - connect it with any 2 pins one by one if the LED glows without pressing the switch...then those 2 terminals (pins) are shorted internally. and off course no need to check other 2(which will be definitely a shorted terminals once you find any shorted terminal for the first time).
2. Use multimeter continuity check method to figure out the shorted pins.
Hope you got it now.
@@PiyushPrasoon thank you