How to replace the headlight bulbs FIAT 500 💡

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@morseman4759]

Excellent after seeing the usual few bad videos this one showed me clearly what to do.

[@UseTool_EN]

Thats what we do ! Thanks Morseman

[@tryagain.k1821]

Thank you for the exceptionally clear video of the actual parts. Camera placement must have been very difficultto get such clear views because there is very little room to even get a hand in. My Abarth is even worse than a 500.
Pre 2016 European 500's have different headlights to the USA's.

[@Paulcarriom]

Brilliant video thanks. Very clear and easy to follow.

[@alfretonred]

Thanks. Very helpful. Not much room to access the nearside headlight but only took a few minutes.

[@pizzafireman]

Really easy to understand. Thank you very helpful

[@MartsGarage]

Thanks very much. This helped my son and I change one of the bulbs on his fiat. It is worth mentioning not to touch the headlamp bulb with bare fingers as the oil in your skin can cause premature bulb failure.

[@TheStingyRay]

Just changed the dipped headlight bulbs on a 2018 500 Pop 1.2 8V. Bit different, you just unscrew the cap and then have a little metal latch which you slightly pull downwards and away. Then you can remove the bulb and replace, then put the latch back in place and screw the cap back on.

[@shizaru2084]

Thank you! Was trying to figure why mine wouldn't turn 😅

[@safdarrizvi9885]

Just took my 2013 Fiat 500 Lounge for MOT today.The passengers side H7 bulb was loose and giving off bad beam.Previous owner had fitted H7 in wrong position.I turned it around and it clicked in to place.

[@nintenjoab113]

Ace video - swapped within 5 mins. The nearside bulb is tricky to get to but you can if you persist

[@tinahudson6152]

Thanks, so easy when you know how ;)

[@bartrabiej]

Great video! Thanks a lot!

[@UseTool_EN]

You're welcome Bart !

[@jasmindedamas6773]

Thank you.. Very helpful..

[@UseTool_EN]

Thanks Damascus

[@Werewolf914]

Thanks for the video, I'll try this later when it's daytime, I don't know if the 500 Sport or US version is any different but I wouldn't think I don't know anything about cars but I'm pretty sure the only difference between European Cars and US ones is the steering wheel being on different sides which I don't think that'd effect headlight placement but guess I'll find out when I look later.

[@trevorneedham8231]

a very good video very clear

[@UseTool_EN]

Thanks Trevor !!!

[@Craigsmitha7x]

I know absolutely nothing when it comes to
cars and electrics but this video made it very simple - much appreciated and saved me paying Halfords for what is a very simple
job 👍🏻

[@UseTool_EN]

Thanks a lot @Craigsmitha7x for this heartwarming comment! Always glad to help!

[@aaronscottjockers4490]

Thank you 😊

[@UseTool_EN]

Hi @Aaron Scott Jockers! You're very welcome! How did the operation go?

[@brycenew]

Excellent video; thank you!! Subscribed :D

[@UseTool_EN]

Hello @Bryce New! Thank you! And thanks for subscribing! It helps a lot!

[@lizprince-harding4787]

Thanks for this. My dipped beams have the same kind of connector - but I can only remove the connector, it won't bring the bulb out with it! So frustrating. Any clues how I can get it out? If I pull the bulb out with pliers, will it break?

[@Paranoidandro1d1]

Itd be helpful to say what size code bulb you need

[@SChapps]

So to lock it back in, you turn it to the left again?

[@johnlightbody9942]

How do you adjust angle of these main/high beam lower lamps pls?? Anyone??

[@handeana1193]

Thank u

[@enzokoster3294]

Nice but try the other side with the battery en fuse box good luck 😅

[@yesyesyesnonono5748]

Not a problem

[@onpsxmember]

Now do the same on the left side close to the fuse box.

[@koreankohakku]

Impossible to reach left dipped beam light