Be Like Mike and Get Honey for FREE today! ▸ joinhoney.com/detailgeek What an absolutely INCREDIBLE transformation!! That's a detail I won't ever forget! Have a great weekend guys!
I dunno but likely. Seems like folks are bringing in the worst of the worst lately. It's like they thrown down the challenge gauntlet for DG. Up for the challenge.
In Texas the best way I found to remove mud off of my frame is to go to this river south of Dallas and it’s perfect for burnouts and it cleans my frame but not everyone is lucky as us Texans
i think that truck was dirt cheep because it was under water..you can tell by the amount of mud in the rear frame..musta had a boat attached and it fell/reversed into the dock/water...you can tell also by the amount of mud inside the tail lights..
@Seek Him with all your heart and you will find Him you are honestly the type of person that I avoid at all costs. Thanks for your preaching, but for me, I already know where I'm going
I’ve officially become addicted to these videos. It’s so satisfying to see this guy clean these vehicles to make sure that they look their best when he’s done with them. Incredible work indeed.
I honestly didn’t think the carpet would come that clean on the vacuuming. 😱 I thought you might just blast it all out with the pressure washer!🤣🤣🤣💜💜💜 Astounded by this transformation and great client reaction!!! Thanks for sharing this nasty beast with us! And hi to Mike!😁
This truck looks a THOUSAND TIMES BETTER than it did when the guy bought it, not just ten times better. WOW!!! My dad used to own a car yard before he retired and I worked there too sometimes, just cleaning the cars for pocket money. I saw some dirty vehicles but nothing like this truck. You did an AWESOME job dude 👏 Love from Amanda in Australia ❤️
The Detail Geek should take the award, Mitch you really do amazing jobs on vehicles no matter the condition they are in. You make the old new again. Great work
I truly love watching you clean these insane vehicles! Cleaning for me is such stress relief, so seeing these amazing transformations is what I usually fall asleep too 😅
You should do a video of how you first started ? How you got customers here and their to grow your business? What did you start with? And how did you go about doing it all?
That steel wheel (driver's rear) worries me. All those weights in one spot is either a defective tire (bad casting) or a bent rim. Outstanding job as always!
Definitely looks to me like they were chasing weights. I wonder if they just lacked heavier weights, or if there’s something wrong with the wheel/tire.
it looks to be a spare and considering you should be driving rarely with it i dont find it to be too much of a problem, couldve been laziness on the tech to not rotate the tire so the light spot of the tire and heavy spot of the wheel meet or vice versa, sometimes you cant put weights on the inside for various reasons and that makes the outer side heavier, sometimes wheels are just garbage, but i think this was a laziness factor to be honest
The one piece of advice I would highly recommend is to watch out when using steam cleaner on door panel speaker covers. The steam could seriously damage the speaker cones, glue separates and creates an issue with speaker.
@@daltex81 and you can always be stupid and ruin the speakers instead of taking 2 minutes to pop off the door panels. that was a seriously brain-dead response.
You did that in 2 DAYS?!?!?! AMAZING! 👏 👏 👏 I love doing stuff like that, but I'm sure that would've took me 3-4. Well done! You have a new subscriber here!
Can the steam harm the speakers in the doors or dash? I always get nervous cleaning over the covers because I love my music and good speakers are pretty expensive😂 I love this transformation though!
I have the same question. The scene on the right hand drivers door looks like it takes a while to clean. How does the stream not hurt the speaker in the door?
Bullet casings, spent shells, and an empty beer can IN THE TRUCK is wild 😂. I know this is 2 years old but my soul will be retroactively cleansed along side this truck
Got a subscription from me just for the solo at the end. That was a crazy good job on the detail bro. Im starting my own mobile detail company and this was a huge help watching this transformation
At first I thought this guy was just rip off Chris Fix but now I realize that their content is completely different. Chris makes how-to videos and this guy makes videos more for satisfactions sake.
I would highly recommend that you use protective eyewear when cleaning! Using those brushes and especially high pressure water jets causes destructive ricochet of particles.
I wouldn’t entirely recommend steaming the metal mesh on the door panels due to speakers being behind it, you can easily take them out with a flat head screwdriver and they just pop back in
Electronics are underneath the speaker cone. There are videos of people putting paint in speakers and letting the bass fling it all over the place. They will be fine.
Amazing work there Mitch! Question though, does it not damage the door speakers using the steamer on the grilles like that? Same with the other electronics. I'm curious because I've always been super careful/paranoid around those parts of my cars.
Yes it does. Maybe not every time and maybe not immediately. But the dirt/mud wasn't removed. It was just liquified and pushed through the door panel to the backside with the steam. With basic/cheap trim removal tools the door panel can be popped off in 2 minutes or less.
am i the only one who wonders how in gods name is his walls not covered in dirt from muddy water spraying from the cars he cleans?? like how are they so clean????
Fun! It’s also great to leave on for my dogs when I’m gone. Your voice relaxes them! I like the extracting. Wonder why you don’t remove the backseat bottom to clean?
Wow! I started following you last night. That's hard work but the end it's spectacular. Loved every single video. Love the interaction with the lazy, cheap brother as well. Playing the guitar at the end, very relaxing. 😊. You are the Car Detailing Whisper.
Getting into my brother's truck, I have to move a pile of trash 12 inches high off my seat first. It's the worst! I'd love to see you work your magic on his vehicle!
This was super satisfying to watch. I used to detail at a Chevy dealership and by god this brought back some memories of some dirty ass vehicles😂. You’ve earned a like and a sub my mans
Are you familiar with Blockchain technology? a company that allow you earn mined coin on the bitcoin network without owning a Bitmain antminer, with such an investment you can definitely plan for this summer vacation...
Blockchain mining is exactly what every growing business needs. I would gladly pay over 2 million dollars for blockchain mining. Blockchain mining is the most valuable business resource we have Ever venture into
@ The Detail Geek the amount of detail you put into each and every part of the car is simply a feast to watch! thank you for sharing this workflow! this is one of the 1st videos i came across and was wondering doesnt all the water you used to clean the underside of the car and wheels harm the car in the long run(rust forming from water)?
Can use use your cleaner on indoor home carpet spots? Also, I think that with your drill brush, you may be able to gently loosen some of that hard caked on stuff on carpets, so it's faster and easier to vacuum before the wet application...just a thought!
At least it was possible to clean it up. The most completely-used-up pickup I have ever seen was a Chevy, circa 1960, that, by 1970 or so, had rusted through somewhere in every body panel. It belonged to the county trapper. The bed was always filled with the tools of his job.
Great work! That’s an impressive transformation. And whoever balanced that steel wheel needs to find a different job, that’s a massive load of wheel weights. Haha
I am so Impressed! It looks Awesome! I would be so excited! I would have take it to the previous owner & show it off!! That would be kind of mean but I would give him your Business Card & tell him if you need your vehicle clean, he should give you a call!!
just a quick tip, when your going over the seats with the brush and wet vac, you need to move slower, your not gonna be able to suck up all the junk if you go that fast
I like your hard work, i think you do a good job. Im a former auto detailing owner and im just saying next time something comes in that filthy, take the upholstery out! There is dirt underneath that carpet without a doubt. Id take the headliner out too!
@@clemradio I have met some of the most insane freaks in London Ontario. I had a random dude pull a knife on me. I have been to a lot of places in Ontario and Quebec and had the most issues with insane goofs in Ontario.
@@MarkfromNewYork ok yeah I can imagine that. What I meant is Canadians are a tiny bit more polite, but it’s a clone of the US. From a European pov at least, Canadians do not realize how a copy of the US they are. (I exclude Quebec from Canada here because it’s a completely different context, starting with the language.)
Outside of the dirt, I can't believe how much rust is in there too underneath the truck. I'm sure if the cars could talk they would say how much better they feel.
I always feel like the owners are underwhelmed at these unbelievable transformations. Especially the interior,I would have freaked out at how great it came out.
I used to own an auto detail business some 20 years ago. Still to this day, throughly cleaning a vehicle and making it look better than the day it rolled off the lot, relaxes me beyond belief. I had a stressful day today and your video, beginning to end, took all the stress away as if I was cleaning that truck myself. Awesome work.
Hi Kevin, I'm trying to assist my younger brother and set him up with a detailing business he can do while his finishing his studies, could you assist with a breakdown of how you charged for your service. Would really appreciate any assistance. Thank you in advance.
You do such quality work, charging his battery, attention to detail, it’s all very nice. I keep my truck fairly close to spotless but I often wonder how much better it’d look if I took it to someone like you 😂
okay, so hear me out. ive been detailing for a couple years now, and one of my favorite transformations are the engine bays. nobody ever seems to focus on them, and they can easily be a selling point. do you do them? if so, any chance you could start putting them in videos? I absolutely love your work, and have been a subscriber for a couple years now. keep up the great work!
He's included them a few times when the customer asks for it. On his other channel, Detail Geek 2, he has a couple of engine bay videos under tutorials.
I bought everything in your shop I used it to detail on my cars they turned out beautiful they turned out like they came out of the dealership after looking at the results in them I almost cried in tears of joy
Moral of the story: have a proper detailer work over your car before you sell it. A few hundred bucks of professional work could net you thousands in resale value.
Be Like Mike and Get Honey for FREE today! ▸ joinhoney.com/detailgeek
What an absolutely INCREDIBLE transformation!! That's a detail I won't ever forget! Have a great weekend guys!
Detroit in the building!!
How did you plan out your strategy to detail the truck 🛻?
Only if you have an iPhone
When people can join your channel using #bitcoin ? Do you own any #btc?
16 hours, you are a machine
I always love how even just vacuuming the carpet makes SUCH a huge difference, even before the wet treatment
@Seek Him with all your heart and you will find Him ashol
Thay the vacuuming was crazy.
The power of a good suck;)
Why should he
Wonder if he puts any scotchgard type stuff on carpet
Only 2 months into the year and I predict this will be a strong contender for the 2022 Detail Geek awards for best transformation
I dunno but likely. Seems like folks are bringing in the worst of the worst lately. It's like they thrown down the challenge gauntlet for DG. Up for the challenge.
I’d say it’s definitely up there for interior transformation, the exterior is still pretty beat even after being detailed.
It’s got well worn exterior but that interior tho it’s definitely a contender even I have never seen a interior that bad.
I dont think anything gonna be worse them that black crsyler town and country van he done
In Texas the best way I found to remove mud off of my frame is to go to this river south of Dallas and it’s perfect for burnouts and it cleans my frame but not everyone is lucky as us Texans
It always amazes me how much better the carpet looks after just vacuuming it.
This gives a whole new meaning to “dirt cheap”. Absolutely amazing work
Makes me wonder how cheap he got it since he was going to just buy a new interior for it.
i think that truck was dirt cheep because it was under water..you can tell by the amount of mud in the rear frame..musta had a boat attached and it fell/reversed into the dock/water...you can tell also by the amount of mud inside the tail lights..
@Seek Him with all your heart and you will find Him don't force it against their will
@@lawnside82 also by how rusty it is, it may have been a lot of water damage
@Seek Him with all your heart and you will find Him you are honestly the type of person that I avoid at all costs. Thanks for your preaching, but for me, I already know where I'm going
Had me laughing when Mike's pop up came lol. Was not expecting him
I totally agree with this statement 🤘😎❤🤣
Eating honey right out of the tub was classic.
But who is Mike? I guess I haven't watched enough of these videos to know
@@lauraray8522 mike is his twin brother (if I’m wrong I know mike his brother at least)
My brain has THE WORST time believing that Mike is even real and he isn't just Mitch acting and editing it all😂
Leave it to the OG of detailing to bring this truck back to life. I expected nothing less. Amazing!
I’ve officially become addicted to these videos. It’s so satisfying to see this guy clean these vehicles to make sure that they look their best when he’s done with them. Incredible work indeed.
just go to club car wash and watch us 💀
Everytime I think that you missed a spot, you end up getting the spot, these videos are so relaxing and satisfying
I honestly didn’t think the carpet would come that clean on the vacuuming. 😱 I thought you might just blast it all out with the pressure washer!🤣🤣🤣💜💜💜 Astounded by this transformation and great client reaction!!! Thanks for sharing this nasty beast with us! And hi to Mike!😁
This truck looks a THOUSAND TIMES BETTER than it did when the guy bought it, not just ten times better. WOW!!! My dad used to own a car yard before he retired and I worked there too sometimes, just cleaning the cars for pocket money. I saw some dirty vehicles but nothing like this truck. You did an AWESOME job dude 👏 Love from Amanda in Australia ❤️
The Detail Geek should take the award, Mitch you really do amazing jobs on vehicles no matter the condition they are in. You make the old new again. Great work
The carpet cleaning is always my favorite to watch. Soooo satisfying.
I truly love watching you clean these insane vehicles! Cleaning for me is such stress relief, so seeing these amazing transformations is what I usually fall asleep too 😅
You should do a video of how you first started ? How you got customers here and their to grow your business? What did you start with? And how did you go about doing it all?
That steel wheel (driver's rear) worries me. All those weights in one spot is either a defective tire (bad casting) or a bent rim. Outstanding job as always!
Definitely looks to me like they were chasing weights.
I wonder if they just lacked heavier weights, or if there’s something wrong with the wheel/tire.
i don't think ive ever seen that many weights on a wheel, i wonder what's on the inner bead?
There was weights at 12 and 7 on the passenger front too
Whoever put that many weights on had NO idea what they were doing. That wheel or tire is junk and needs to be replaced!
it looks to be a spare and considering you should be driving rarely with it i dont find it to be too much of a problem, couldve been laziness on the tech to not rotate the tire so the light spot of the tire and heavy spot of the wheel meet or vice versa, sometimes you cant put weights on the inside for various reasons and that makes the outer side heavier, sometimes wheels are just garbage, but i think this was a laziness factor to be honest
I’m pretty sure we never see his face during the washes because Mike actually does 100% of the work
I low key love this theory
😅 😅 😅
Every now and then we see his face, but what if thats just so we think its him and not mike? 🤯🤯🤯🤯🤯
Heh. Dirt cheap sounds pretty accurate there 🤣
I’m not quite halfway through, but you’re vacuuming the carpets and to be honest, just the vacuuming alone is making it 1000 times better
The one piece of advice I would highly recommend is to watch out when using steam cleaner on door panel speaker covers. The steam could seriously damage the speaker cones, glue separates and creates an issue with speaker.
Legit good advice
You can always replace the speakers
@@daltex81 and you can always be stupid and ruin the speakers instead of taking 2 minutes to pop off the door panels. that was a seriously brain-dead response.
Amazing transformation. I was a bit surprised the owner wasn't more shocked at how good it looked. Also, I loved the guitar outro.
I’m a sucker for squarebodys since I also own a 78 GMC. Would love to see you detail an old squarebody!
Dang, this was a great one!!! Kinda sad we didn't get to see the driver's footwell extraction, I bet that was super gross! Keep up the miracle work!
Me too! I was hoping to see him tackle the driver's footwell as well! But he's always awesome with the attention to detail!
In 20:42 there is a moment in which his hand coordinates soooo smoothly with the beat of the song, more if you play it in 2x
That doesn't even look like the same truck. I have seen all or almost all of your videos and know you do good work. This one was absolutely amazing.
The way you detail is considered a skilled trade, imo. Craftsmanship. Good work.
The legend says that Detail Geek build another house with the mud from that car :))
Pretty impressive how good those
Fords clean up that thing was filthy I enjoyed watching the video a lot very satisfying
Man, this gotta be the dirtiest i have ever seen on your channel. Absolute patience you got there brother, to clean up this shit. 😂🤣 my respect mitch!
Great work you do and with integrity! I love it thank you for the good energy and intentions you put out!!
Man as soon as I saw the chasi I quickly realized why the guy got it so cheap 😂
You did that in 2 DAYS?!?!?! AMAZING! 👏 👏 👏
I love doing stuff like that, but I'm sure that would've took me 3-4.
Well done! You have a new subscriber here!
That air freshener at 1:14 is doing the best job possible
Would love to know how many hours were actually put into cleaning this... huge transformation
16 hours, he says it at the end of the end of the video
@@mahlholm thanks I missed that
You did an awesome job on this detail! As the owner of F150s and now currently my 2015 Lariat, I'm a Ford truck girl, and this was a nice detail! 💯🎯
Can the steam harm the speakers in the doors or dash? I always get nervous cleaning over the covers because I love my music and good speakers are pretty expensive😂 I love this transformation though!
I have the same question. The scene on the right hand drivers door looks like it takes a while to clean. How does the stream not hurt the speaker in the door?
Bullet casings, spent shells, and an empty beer can IN THE TRUCK is wild 😂. I know this is 2 years old but my soul will be retroactively cleansed along side this truck
Got a subscription from me just for the solo at the end. That was a crazy good job on the detail bro. Im starting my own mobile detail company and this was a huge help watching this transformation
At first I thought this guy was just rip off Chris Fix but now I realize that their content is completely different. Chris makes how-to videos and this guy makes videos more for satisfactions sake.
I remember using a car dolly and lift to pressure was the oil and gas trucks that would come in. Then undercoating. It was so satisfying.
I could almost smell how clean that interior was when you were finished 😮
That's one heck of a vacuum. The carpet looked great after hitting it with the suction
I can't help but to wonder how much you charge for such an amazing detail job.
I’d charge at least $1000
This job is definitely closer to $1000
I would highly recommend that you use protective eyewear when cleaning! Using those brushes and especially high pressure water jets causes destructive ricochet of particles.
I wouldn’t entirely recommend steaming the metal mesh on the door panels due to speakers being behind it, you can easily take them out with a flat head screwdriver and they just pop back in
Electronics are underneath the speaker cone. There are videos of people putting paint in speakers and letting the bass fling it all over the place.
They will be fine.
@@jimmychimmle8798 facts
Amazing work there Mitch! Question though, does it not damage the door speakers using the steamer on the grilles like that? Same with the other electronics. I'm curious because I've always been super careful/paranoid around those parts of my cars.
Yes it does. Maybe not every time and maybe not immediately. But the dirt/mud wasn't removed. It was just liquified and pushed through the door panel to the backside with the steam. With basic/cheap trim removal tools the door panel can be popped off in 2 minutes or less.
Always remove the door panels before a deep clean like this.
Depends if the speakers have foam rings on them, if they do then water def damages it.
The number of wheel weights on that back left tire! Holy moly!
This is amazingly and weirdly so calming to see the amazing end result 😊
Aw was the little girl carrying a thank you present for you?! 😍
Loved the video, is there any way you could weigh the cars before and after a deep cleaning? I always wonder how mich weight you actually rinse off!?
am i the only one who wonders how in gods name is his walls not covered in dirt from muddy water spraying from the cars he cleans?? like how are they so clean????
Holy crap at the wheel weights on that rear wheel! Anywho, amazing cleaning!
Fun! It’s also great to leave on for my dogs when I’m gone. Your voice relaxes them! I like the extracting. Wonder why you don’t remove the backseat bottom to clean?
Wow! I started following you last night. That's hard work but the end it's spectacular. Loved every single video. Love the interaction with the lazy, cheap brother as well. Playing the guitar at the end, very relaxing. 😊. You are the Car Detailing Whisper.
you put so much effort and care into your work. I can tell you really enjoy what you do! great job, as always!
Okay which one of you guys usually watch this video to go to sleep surely I do is it so satisfying to watch 😅
Getting into my brother's truck, I have to move a pile of trash 12 inches high off my seat first. It's the worst! I'd love to see you work your magic on his vehicle!
The most American truck I’ve ever seen love your videos
This truck had my respect waay more than any pavement princess with all the options and extras.
This was super satisfying to watch. I used to detail at a Chevy dealership and by god this brought back some memories of some dirty ass vehicles😂. You’ve earned a like and a sub my mans
The amount of wheel weight on that spare is comical! XD
16 hours? I hope you got paid well. That's incredible with that transformation.
Mic Ultra and shotgun shells and mud sounds like the makings of a country song.
AMAZING TRANSFORMATION! YOU’RE THE GOAT DETAILER!🔥🌟💯❤️
Love the shotgun shell just rondomly laying on the floor😂
Are you familiar with Blockchain technology? a company that allow you earn mined coin on the bitcoin network without owning a Bitmain antminer, with such an investment you can definitely plan for this summer vacation...
No I haven't. Kindly brief me on Bitcoin....how it can help increase my monthly income.
Yes, but some of my colleagues that tried trading end up loosing thousand of dollars on the platform.
Blockchain mining is exactly what every growing business needs. I would gladly pay over 2 million dollars for blockchain mining. Blockchain mining is the most valuable business resource we have Ever venture into
Bitcoin investment right now is in every wise individuals mind, in a week time you'll be ecstatic with the decision.
Bitcoin is the New gold! 💥💥
Bitcoin to the moon!! 🚀🚀🚀
Nah cuz I actually got chills when he was showing the before and afters at the end
If a serial killer owned a truck, it'd be this one😉😄. Brilliant job cleaning up the evidence!😄
@ The Detail Geek the amount of detail you put into each and every part of the car is simply a feast to watch! thank you for sharing this workflow!
this is one of the 1st videos i came across and was wondering doesnt all the water you used to clean the underside of the car and wheels harm the car in the long run(rust forming from water)?
Can use use your cleaner on indoor home carpet spots? Also, I think that with your drill brush, you may be able to gently loosen some of that hard caked on stuff on carpets, so it's faster and easier to vacuum before the wet application...just a thought!
Man, I'm amazed there is nothing other than surface rust, at least it looks like
Bro even my cat loved watching the video keep up the good work 😊
THIS IS AN AMAZING TRANSFORMATION.
When I grow up I want to be just like you. Love your work bro!
Would have liked some shots of how you cleaned the bed of that truck!
The amount of weights in that rear driver wheel is crazy
At least it was possible to clean it up. The most completely-used-up pickup I have ever seen was a Chevy, circa 1960, that, by 1970 or so, had rusted through somewhere in every body panel. It belonged to the county trapper. The bed was always filled with the tools of his job.
That's one mighty powerful vacuum you have sir 😁
Great work! That’s an impressive transformation. And whoever balanced that steel wheel needs to find a different job, that’s a massive load of wheel weights. Haha
Definitely just needs a new wheel 😆
You are AMAZING, plain and simple!
This is the type of truck I would be put on at my work site and expect to have it washed and detailed in 5 hours
I am so Impressed! It looks Awesome! I would be so excited! I would have take it to the previous owner & show it off!! That would be kind of mean but I would give him your Business Card & tell him if you need your vehicle clean, he should give you a call!!
Great job. Is there a rust dissolver you could have used for the rust showing on the lower panels?
If the old owner treated this truck so badly, I'll bet he never serviced it regularly either.
Do you have any videos of cleaning out the cabin filters to go along with Great refurbishence
Beautiful works Sir thank you for your videos
just a quick tip, when your going over the seats with the brush and wet vac, you need to move slower, your not gonna be able to suck up all the junk if you go that fast
That was awesome!! 🎉 Very satisfying. Thank you for sharing your hard work and skill. 😊
Wow. I wish i knew you! Your work is impeccable!
I like your hard work, i think you do a good job. Im a former auto detailing owner and im just saying next time something comes in that filthy, take the upholstery out! There is dirt underneath that carpet without a doubt. Id take the headliner out too!
I swear I'm in love with Detail Geek 😊🤭🤣🫠
You always do great work, but this one was over the top. Literally brought this one from the 🪦💀!
Seeing bullet casings stuck in mud on the running boards of a Ford F150 is the most American thing I've ever seen in Canada
I mean excepted Quebec, Canada is just like a clone of the US with a more friendly population
@@clemradio -I know many Canadians who would hand someone their liver.
Don't confuse "polite" for "nice".
@@clemradio I have met some of the most insane freaks in London Ontario. I had a random dude pull a knife on me. I have been to a lot of places in Ontario and Quebec and had the most issues with insane goofs in Ontario.
@@MarkfromNewYork ok yeah I can imagine that. What I meant is Canadians are a tiny bit more polite, but it’s a clone of the US. From a European pov at least, Canadians do not realize how a copy of the US they are. (I exclude Quebec from Canada here because it’s a completely different context, starting with the language.)
@@clemradio dude there’s nice people in the us too lmao
Outside of the dirt, I can't believe how much rust is in there too underneath the truck. I'm sure if the cars could talk they would say how much better they feel.
Why are you surprised about rust? It’s literally a Ford.
@@JahWontPayTheBill Curb your brand loyalty
@@JahWontPayTheBill rust doesn't care about brand 🤦🏼♂️
@@Kemozabe fords rust out horribly on the underside not just the trucks either
I'd just trade it in on something better or sell it to a dealership and make my money back on it
I always feel like the owners are underwhelmed at these unbelievable transformations. Especially the interior,I would have freaked out at how great it came out.
I think the issue is most people don't freak out. I'm sure it wasn't for free either.
Same!!! I was yelling, look in the back!! Look!! But nothing. I would be freaking out of how good it looked. Shame. M is a miracle worker for sure. ❤
Dude does witchcraft on these details!
This detail probbaly cost 2-3 thousand dollars.
I am thinking the same thing.
I used to own an auto detail business some 20 years ago. Still to this day, throughly cleaning a vehicle and making it look better than the day it rolled off the lot, relaxes me beyond belief. I had a stressful day today and your video, beginning to end, took all the stress away as if I was cleaning that truck myself. Awesome work.
Hi Kevin, I'm trying to assist my younger brother and set him up with a detailing business he can do while his finishing his studies, could you assist with a breakdown of how you charged for your service. Would really appreciate any assistance. Thank you in advance.
Same here man washing my truck is my stress reliever
Ngl, I know this wasn’t directed at me and I don’t even know you, but this made me tear up. Hope you have a wonderful life, Kevin.
:!
Same here
You do such quality work, charging his battery, attention to detail, it’s all very nice. I keep my truck fairly close to spotless but I often wonder how much better it’d look if I took it to someone like you 😂
okay, so hear me out. ive been detailing for a couple years now, and one of my favorite transformations are the engine bays. nobody ever seems to focus on them, and they can easily be a selling point. do you do them? if so, any chance you could start putting them in videos? I absolutely love your work, and have been a subscriber for a couple years now. keep up the great work!
He's included them a few times when the customer asks for it. On his other channel, Detail Geek 2, he has a couple of engine bay videos under tutorials.
@@ChiefsFan62 thank you Wendy.
@@FrozenMermaid666 forget your meds?
@@kadenstimpson3167 nah he just like me and stoned out of his mind
@@kadenstimpson3167 I watch this shit when im stoned also
I bought everything in your shop I used it to detail on my cars they turned out beautiful they turned out like they came out of the dealership after looking at the results in them I almost cried in tears of joy
As the owner if a 2011 F150 that looks brand new, my heart hurts for this truck. 😂
I have a 2014.
we have a 2009
You could hear it sighing with relief when he jet washed it.
I have an 07 Lariat that looks showroom, even with 170,000 miles. It pays to take care of your vehicles.
Moral of the story: have a proper detailer work over your car before you sell it.
A few hundred bucks of professional work could net you thousands in resale value.
Noted