Epic fail is (because people dont watch whole video to read): DRUM gone closer to seal causing it to rubb against it during spin. Anyone knows what happened there?
2:46 if you enabled the rpm here It looks like is in normal cycle spin at 800 rpm And in service mode now without rpm is like limited final spin to 800 rpm
You shoud pop the back cover and take a look. Mebay the whole drum and spider assemby somehow moved ? Does this machine use standard belt or it"s some kind of direct drive ?
OMG CANT WAIT TO WATCH IT Edit: why did it get close to the door seal and how? Lol and I have never seen a Samsung jump like that in my life lol what you gonna do next?
It happened because the load was too heavy to begin with, which makes the door seal get pretty close to the drum. When it started spinning, the balloons got closer to the edge of the drum (or perhaps the water inside them) and thus the drum started rubbing the seal, simple as that.
I guess at 4:07 there was pretty unbalanced spin due to that the drum could have bent or it could have misplaced from it's bearing. Try hitting drum back into it's bearing. Maybe due to the vibration the drum could have misaligned from it's bearing. Just try rotating the drum after removing the belt so that we could check if there is any movement (play in the drum, eg. A bad bearing in a drum would cause play in the drum) if that is the case then u should definitely change the bearings. Or could try removing the door seal and reinserting it. Maybe it could be just the door seal got under the drum's edge
Wow and my nannies candy broke because candy is rubbish as we know what happened was my mum went to there house and could smell Bert plastic it’s a Crandall one they had. Poor about 5ys and getting a beko one of the good ones
Drum got very close to the door seel due to water baloon poping and causing a mega waterlock(My gorenje when there is sudslock the drum starts backing up and when it starts slowing down drum gets back in form
4:05 You can clearly see this Samsung you can destroy. It's as good as Gorenje. Let's see, what it will do with the 6 litre water bottle. I think it'll also walk like in this video.
Epic fail is (because people dont watch whole video to read): DRUM gone closer to seal causing it to rubb against it during spin. Anyone knows what happened there?
Yes! I know that it went completely mad! LOL!
I know it goes mad
Drum probably bent, these samsung known for it as the drums are thin as
He unplugged the power
@@washingLad2014SamsungDestroy Agree
4:05 Belt slips😂
0:53 Warning! Your washing machine is getting overfilling please drain before use on service cycle
was literally just checking your channel to see if there was any stress tests i had missed lmfao!!
2:46 if you enabled the rpm here
It looks like is in normal cycle spin at 800 rpm
And in service mode now without rpm is like limited final spin to 800 rpm
GodDay b?
One question? Out of 10 about Indesit washing machines and why?
And Bosch / Balay?
4:03 My shitty Kenmore top loader:
0:43 My new Samsung front loader:
LaundryGuy1500 guy needs to see this
Or dimo petkov
@@Transport_with_Georgiee ofc he will hes russian
@@犬用下着ソース入り消臭剤 bulgarian*
lg uhd tv
@@alpitu21 yes
You shoud pop the back cover and take a look. Mebay the whole drum and spider assemby somehow moved ? Does this machine use standard belt or it"s some kind of direct drive ?
Standard brushed motor with belt
Handled pretty well for a samsung, it didnt stopped Working fine. 1 question, with what are u recording? ❤
iPhone I think
Yes iphone
@@C1200A Im agree
He uses an iPhone 11pro
@@SamsungLad2005 lol I'm agree
Good dayB:epic fail
Me: wow that's crazy
4:05 my nans hoover be like:
Every hoover/candy be like ^
OMG CANT WAIT TO WATCH IT
Edit: why did it get close to the door seal and how? Lol and I have never seen a Samsung jump like that in my life lol what you gonna do next?
6L Water bottle
It happened because the load was too heavy to begin with, which makes the door seal get pretty close to the drum. When it started spinning, the balloons got closer to the edge of the drum (or perhaps the water inside them) and thus the drum started rubbing the seal, simple as that.
Зэззз
LIOOOOOL WTF MAN 😂😂😂😂
HOW DID IT GO FROM THE DRAWER HAHAHAHAHHA
Can you do a carpet test on aeg/elecktrolux
idea:
do a single item test with the transit bolts still on
Handled good but could be better 🙂
I guess at 4:07 there was pretty unbalanced spin due to that the drum could have bent or it could have misplaced from it's bearing. Try hitting drum back into it's bearing. Maybe due to the vibration the drum could have misaligned from it's bearing. Just try rotating the drum after removing the belt so that we could check if there is any movement (play in the drum, eg. A bad bearing in a drum would cause play in the drum) if that is the case then u should definitely change the bearings. Or could try removing the door seal and reinserting it. Maybe it could be just the door seal got under the drum's edge
4:04 🤭
Me using the washing mashine be like...
Wow and my nannies candy
broke because candy is rubbish as we know what happened was my mum went to there house and could smell Bert plastic it’s a Crandall one they had. Poor about 5ys and getting a beko one of
the good ones
Isn't this one supposed to have water damage prevention system thingy?
During the service cycle, the washing machine does not stop when there is water inside
Made in May 2016... idk why they kept making WF range models
4:03
My grandpa has the same identical washing machine (went to his home today)
Samsung Washer SPn?
0:53 if there is too much water in the washing machine, it limits the speed
Drum got very close to the door seel due to water baloon poping and causing a mega waterlock(My gorenje when there is sudslock the drum starts backing up and when it starts slowing down drum gets back in form
Do a wash with the machine on its side
4:05 You can clearly see this Samsung you can destroy. It's as good as Gorenje. Let's see, what it will do with the 6 litre water bottle. I think it'll also walk like in this video.
See a video from miele
@@btslover-vp1tg I'm looking in this channel every day. So I already know this video(s). 😉👍
@@olxi3321 Ok!Me to😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
0:50 tub clean 😂
Damn, wasn't expecting that, are you gonna fix it somehow?
point is that there are no transin bolts
Paano iaayossin ang aircon carrier E3 naman kaya
Washing machine got goated
You Just look like turbo clean
Calibration mode in Samsung? spin
4:01 started being wrong!?
Cool
@Ненахов Леонид 🥰🥰
@Ненахов Леонид 🥺
@LG-2011 🥺
@LG-2011 🥺
Good, you're testing!
Samsung eco drum clean +in service cicle
Washing Machine 7 kg . You 40kg+😂
TASSO❤❤❤❤❤
IIinA❤❤😂🎉
It’s working the washing machine on😘
Dalawampu't walo ang subscribe ko
Put something extremely heavy that the motor can't even move
Nagwawatch si matt
Теория оф эврисинг Terraria harley-davidson
Good
Well there goes the warrenty lol
Samsung will not repair the machine as you damaged it on service mode
0:59 hes trying to piss because he has lot of water
Good one lol
You almost broke your new beautiful machine
It's an experiment machine + it's not new, he buys these machines USED
@@_funny_guy_official._ yes he buys a new machine and this is a new
@@matejanikolic5238 no, they are USED!!!
@@_funny_guy_official._ AGREE
@@matejanikolic5238 The machine is for stress tests are you dumb?🤦
Please, don't throw bricks in it.
Bricks😈😈
@@washingLad2014SamsungDestroy cause Samsung is a good machine, a Such a good machine
gorenje sensocare motor better than this shit
@@washingLad2014SamsungDestroy both is good
@@mateseres6694 ok
Noice
Ang roblox pangalan ko Preston 🤣🤣🤣🤣
Yung dalawang lobo mag sisira ng Samsung washing machine
Зачем портить стиралку?🤦♀️
И не говори
Maglaro ko find the marker
1:03 The door was leaking
🤯🤯🤯🤯🤯🤯🤯😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱 oakley
abi nasıl bozdun ya
Dlaczego leje się woda z pralki Samsung
When new experiment with Samsung?
Nice !
Kay ina sa room niya walang T.V. sa taas
Why does it say sussy on the were u put softer it’s like Samsung sussy
Ang balita na hindi na nuod si matt
Pls brick it
yes
Not wait more for bricking
All of you cannot wait for bricking?
@@matejanikolic5238 this is an experiment washer not a normal use washer
Ako ay si bacon_boy
SAMSUNG ❤😂🎉😢😮😅😊
Oh No 4:04
Hit the drum in the front because the drum slides forwerd ;¬)
it's popping inside
Yay
Juping 😰😰😰😰😰😰😰
🎉🎉🎉🎉🎉ορειβατικη
Heavy balloons will smash
Bawal isirain ang washing machine
Class!
Keep crazy
Pero bawal sumigaw magsasay ako
5l bottle pls?😉
Ang bilis mag spin
what is that sound 4 minutes and five seconds
I see for cotton 40 without extra rinse is 2 hours and 52 minutes
Shut up
No one cares anyway
она чо поломалась когда она скакала
80KG
Нутро машинки той очень ужасный 😮
Overload please
Good morning
Oh mien gott 🤣
Ang T.V. gumawa dito sa bahay
cool
Apat na ang T.V.
Abogado at abokado
0:00
u broke it
Yeah he almost broke it
No it’s only the drum that got sucked in and that’s not big deal
@@matejanikolic5238 no
6:39 PM
epic fail was here water balloon #samsungwasherfrontload
(EPIC FAIL) 5 p n 1400 spin