I can honestly say, I've never sat and watched a 30 minute video, with not spoken words all the way to the end. Until now. This is a great video, and excellent workmanship. ... Honestamente puedo decir que nunca me he sentado y visto un video de 30 minutos, sin palabras habladas hasta el final. Hasta ahora. Este es un gran video y una excelente mano de obra.
i must admit the amount of craftmanship in this video is absurd everything was taken care of round of corners rounden holes for speaker ETC how you formed the box with cutting the corners in beetels just how much care you taken into this project is fantastics well done dude
I have literely watched dozens of DIY Bluetooth Speaker videos on TH-cam so far but this one was by far the best I have watched in a long time. Everything was done the way it should be in terms of box being sturdy and beautiful at the same time. Electronic part was done precisely the way it is supposed to be with pre amp, amp, crossover and Bluetooth installed correctly. The only thing that can be improved is better locking on/off switch and a cooling system. Overall the end product came out amazing. Only if it had one the big corporation as Poineer, Kicker, JBL or even Bose logo on it no one would have believed it was home made. Extremely well done. Keep up the good work. Liked and Subscribed.
I've seen many "DIY" videos of all kinds of things, but by far this one has the best build quality of any! Plus, I'm not sure it was intentional, but excellent tool safety was maintained throughout the entire process, which is very commendable. Excellent work!
Yo i was thinking "it is 36 minutes, nahh i will watch the beginning and will skip to the result" But somehow i satisfied every second of this video! Worth 36 minutes
Excente trabajo, no solo carpintería y electrónica, también, todos los cables han quedado de la mejor manera posible. Pocas veces he visto este nivel de dedicación y esmero. Eres un referente, en horabuena.
@@samadams219 No! I think the guy has limited English and literally doesn't know he insinuated he has had love made to him by this guy in the past or has seen him making love and it was "impressive" lol.
@@samadams219 dudes like: "He makes a great speaker box and has great sex. Great video man!!!" What??!!! I bet his friends were like yeah that's how you type it..and laughing like hell when he posted it.
The video production and lighting is absolutely outstanding. The staging of each sequence had to be pretty elaborate and well thought out in order to make sense to the viewer. From a pure geek perspective, this is like a gizmo buffet where you can pick up very good techniques in your own endeavors. While the speaker itself is very cool, I was far more impressed with the presentation.
This is crazy man, I admire every skill you've demonstrated here. It's nuts just thinking of how long it took to make this speaker and the video, never the less the skills needed to make such a device!
beautifully done. the removable batteries is very portable, passive radiator done right and even makes crossover for better sound quality and balance. 10/10 hands down one of the best DIY
As usual your attention to detail is admirable. One thing that I would point out regarding the x-over coils and the woofer magnets. Since there is room, I would recommend that the coils not be laid out so close in the manner that you have shown. One should be at a right angle to the other, not laid down flat when they are that close to each other; one flat and the other upright on it's side is preferable unless they are spaced 3" minimum and 5" apart preferably/optimally. Space being a premium, mounting them at a right angle keeps them from interacting with each other and throwing off the x-over points as the arrangement shown will definitely do. That said, it would also be beneficial to purchase a shielded version of this driver too (you can also purchase high carbon steal shielding cups and shield them yourself). Placing the very substantial magnets (relatively speaking) of the woofer drivers so close to the x-over is bound to further change the properties of the coils in the crossovers in addition to the placement issue already noted. I've been doing this for about 40 years and must say, nice to see that the attention to detail and enthusiasm you exhibit still exist in this world of instant gratification, well done!
Ok, I was optimistic that I could build this for the most part until he installed the crossover and whatever the rest of that was so, yeah, this is beyond my skill level. Nice work!
I thought this was going to be a simple diy project then this guy has every woodworking tool know to man, a 3D printer, and he’s an electrician. Good job though. It looks real nice.
Haven't done this sort of stuff for a long time, but I started making my own speaker boxes with home-made crossovers over 35 years ago and this video has me all excited and inspired to build a nice bluetooth project for my shop now.. .. I love the concept of the tool batteries with a limit switch for safety and convenience of using dual power sources. Great video!
The wood working had me mesmerized, couldn't stop watching. Realized early on that this was advanced and any illusions of me trying this were quickly tossed. THEN I SAW THE 3D PRINTER AND SHAT MYSELF!
This video is so damn satisfying… it makes my mind at ease and I just fell asleep 😌… Woodwork Electrical work Planning Quality of tools you’re using The neatness of your work environment 3D printing the drill base Camera positions Lighting Everything is just perfect to watch… Product is not the big thing here, the way you're making it, is... Loved it
You need at least $15k worth of tools, a $3000/month place to work on, $1500 in parts, and a few days of work. I'll team up with you and we can make two of them. I'll put the two pallets
we did the same thing, because the german military g-wagon "wolf" doesn´t come with a stereo system. i assume that applies to almost any military vehicle.
Mono music in 2021?? I was born time, when mono was normal. Then they make stereo. I love stereo :D I don't understand new mono wave :P I like that you use pallets in your projects!
Yes, it is mono sound. That is a correct decision. There is no stereo sound when the speakers are so close, even if he chose to use stereo. The guy is a professional.
My old man says you have a brain of a genius. And he reckons you and your partners have a great future ahead of you.Thank you for showing because he likes to build things from scraps which many people discard. Thank You and keep safe. GOLD BLESS! BYE
Спасибо за видео! 36 минут настоящего удовольствия! Красивая работа! И аппарат получился люкс, это не JBL, даже не Harman Kardon и не Marshal. Это намного лучше! Удачи и успехов!
I went from excited and confident that I could build myself one of these, then it got real after the wood work was done. Was interesting to watch though, I leave disappointed in my lack of skills.
I'm sure it would be doable with all the right tools but it's would still be a month long project for the average person and cost more and sound worse than just buying a pre made speaker lol
What are you talking about? Everyone can do everything, if you set your mind to it. You think it's the first time this guy makes something like this? Naah fam you gotta try try try untill you get it right
My God, too bad we can only give one like. Phenomenal work. Congratulations. You gained another follower for the excellent video and work. Keep up with the amazing work.
eu já tava aqui pensando em juntar 30k em equipamentos (chutando em 2021), aprender marcenaria, eletrônica/engenharia de som, treinar bastante e só aí conseguir projetar uma caixinha dessa. Esse cara é um artista.
Concordo... Não adianta ser DIY pra fazer usando equipamentos caros fora de alcance. É até um trabalho espetacular, mas pra "faça você mesmo" não se aplica.
Meu Deus... A palavra parabéns é nada para definir tamanha inteligência e precisão em conseguir realizar tamanha arte do artesanal ao eletrônico, lamentável ver a quantidade de pessoas que insistem em colocar defeito numa obra prima dessa magnitude, esses aí pra conseguir desenhar um zero só sentando pelado na areia. Tentar desmerecer algo desse nível é uma doença incurável chamada (inveja).
Holy cow this was absolutely amazing. You made this look so simple and the fact you added where to buy all these things is amazing as well. Personally I would still mess it up but this makes me want to try 😅
That's just genius and people like you, your creativity and ability to use old things and new things together in order to create something useful that people would appreciate every day.. I'm seriously awe struck and wish I had your ingenuity and talent.. I certainly hope you get paid well for your creations cause this is worthy.. Nicely done/
30:06 - This is a mono (1 channel) speaker correct? Looking at the top part of the diagram, all the speakers are connected to one channel. 30:32 - You don't need to remove the battery when connecting an adapter. There are Dc Power Connectors with power cut off function. If you route the battery connections through that kind of connector, the power from the batteries will be disconnected when a male DC connector is inserted. Good wood work! Congrats on the build.
@@Vighnesh.M.Productions yeah I was confused because all the bt speakers ive owned even that had 2 or more identical drivers played in mono. Dumbed down for the masses? I have a pair of sennheiser bt headphones, gonna check those tonight see if theyre mono. If so, hi-fi is dead!
amazing building quality, congrat... Just a bit sad that you use only one channel of the sound. why do not use two amplifier en isolate boomer from medium ?
This is insane. A beautiful display of a deep understanding of how the world works, along with very skillful mastery of applying multiple disciplines/skills to work together to form such a masterpiece.
Well, I started out watching and thinking to myself ‘yeah, I might build this pallet project’, and then 😂😂😂😂😂😂😂😂😂😂 - I just start laughing as it gets more and more complicated. I look over at my little Bose bluetooth speaker and think ‘yeah, that still sounds pretty good’! 😂😂😂😂 King - you ROCK man! Excellent skills, fabulous ingenuity, fantastic re-purposing of old electronic switches, etc.!
such an incredible design, and enjoyable video thank you so much! i really appreciate all the work you did to design, create, and produce this, absolutely incredible!
That's awesome, the only thing I would of done differently is to tongue and groove the bottom and top pieces instead of simply gluing them together; it would ensure a better hold and make it less likely to come apart if it was ever dropped or had a sudden impact.
Espectacular 👏💪 lo único que no me gustó es el botón de encendido, le hubiese puesto uno circular metálico a tono con las perillas del amplificador, lo único porque todo lo demás es realmente espectacular, felicitaciones y mis respetos
Hi Friends! Do you like this video?
Yes definitely
Yesss! Good job !
Always a quality video
Yes I love this video 💜💜💜
Me gustaría tener una bocina así
I love how you have all of the tools but cut the pallet wood by hand. A real working man
I think he only used the manual saw because the could not wait until the two batteries were fully charged.
I can honestly say, I've never sat and watched a 30 minute video, with not spoken words all the way to the end. Until now. This is a great video, and excellent workmanship. ... Honestamente puedo decir que nunca me he sentado y visto un video de 30 minutos, sin palabras habladas hasta el final. Hasta ahora. Este es un gran video y una excelente mano de obra.
Du
i must admit the amount of craftmanship in this video is absurd
everything was taken care of round of corners rounden holes for speaker ETC
how you formed the box with cutting the corners in beetels just how much care you taken into this project is fantastics
well done dude
I have literely watched dozens of DIY Bluetooth Speaker videos on TH-cam so far but this one was by far the best I have watched in a long time. Everything was done the way it should be in terms of box being sturdy and beautiful at the same time. Electronic part was done precisely the way it is supposed to be with pre amp, amp, crossover and Bluetooth installed correctly. The only thing that can be improved is better locking on/off switch and a cooling system. Overall the end product came out amazing. Only if it had one the big corporation as Poineer, Kicker, JBL or even Bose logo on it no one would have believed it was home made. Extremely well done. Keep up the good work. Liked and Subscribed.
Thank a lot for your comment. Respect!
This..
uh.... no
Absolutely the same feeling. Best work I’ve ever seen.
According to my characteristics, such a person deserves a million subscribers
I'm with you,but...Only stupid channels get millions stupid people . SAD :(
No he doesnt.
@@abhirmalhotra5103 stop hating
@@BrianBaccus explain your comment. How am I hating?
deserves 20 million subs...
I've seen many "DIY" videos of all kinds of things, but by far this one has the best build quality of any! Plus, I'm not sure it was intentional, but excellent tool safety was maintained throughout the entire process, which is very commendable. Excellent work!
Thank so much!
Fabulous work!
@tempus_fugit7366, have you heard of DIY perks?
@@Zeddify I have not, I will check them out.
Мужик ты гений. Продуманно все до мелочей. У тебя золотые руки.
Кнопочка включения херовенькая. Но остальное по высшему разряду!
It's a pleasure to watch an artisan at work. The fit and finish looks fantastic. Taking recycling and innovation to the max.
Yo i was thinking "it is 36 minutes, nahh i will watch the beginning and will skip to the result" But somehow i satisfied every second of this video! Worth 36 minutes
Same same
Great job, thanks for the great motivational videos, I decided to make content on woodworking and I did it thanks to you!
Excente trabajo, no solo carpintería y electrónica, también, todos los cables han quedado de la mejor manera posible. Pocas veces he visto este nivel de dedicación y esmero. Eres un referente, en horabuena.
sos español biennnnnnnn
bot again
I don't know what's more impressive about this guy...his woodworking, soldering, video editing, or love-making skills?
love making? which part is that? hang on i have to watch again!!
@@samadams219 No! I think the guy has limited English and literally doesn't know he insinuated he has had love made to him by this guy in the past or has seen him making love and it was "impressive" lol.
love making skills? do you know what you just said???
@@brandonpeacock6338 🤣
@@samadams219 dudes like:
"He makes a great speaker box and has great sex. Great video man!!!"
What??!!! I bet his friends were like yeah that's how you type it..and laughing like hell when he posted it.
Das ist mit Abstand die beste Bluetooth Box die ich in meinem leben gesehen habe! Sehr saubere Arbeit, weiter so!!!!
This can never be a DIY with so many professionaly tools. I just surprized to see so many types of tools & in so much quantity.
DIY has nothing to do with what or how many tools you use... It literally means DO IT YOURSLELF, which this guy did.
I don't think I blinked for 36 straight minutes. Absolutely captivating!
A Pallet will never be the same for me again. Masterpiece!
I'm sorry about that!
@@KingMinhvuong ý nó nói là không nhìn cái pallet như gỗ thải nữa. Ý khen đấy bro, ko cần sorry đâu lol
Insane. The workmanship is unsurpassed. Bravo!
The video production and lighting is absolutely outstanding. The staging of each sequence had to be pretty elaborate and well thought out in order to make sense to the viewer. From a pure geek perspective, this is like a gizmo buffet where you can pick up very good techniques in your own endeavors. While the speaker itself is very cool, I was far more impressed with the presentation.
n xz
This is crazy man, I admire every skill you've demonstrated here. It's nuts just thinking of how long it took to make this speaker and the video, never the less the skills needed to make such a device!
agree!!
It comes down to proper measurement, the right tools, and patience. Well, repetition also helps. The more you do anything, the easier it becomes.
beautifully done. the removable batteries is very portable, passive radiator done right and even makes crossover for better sound quality and balance. 10/10 hands down one of the best DIY
Thank youu!
I’ve been watching this breathless from the first to the last second. As a music-addict I can only dream of doing the same! RESPECT!!
Thank you!
Сколько терпения, сил, умений ушло на изготовление этого устройства. Великолепно!
As usual your attention to detail is admirable. One thing that I would point out regarding the x-over coils and the woofer magnets. Since there is room, I would recommend that the coils not be laid out so close in the manner that you have shown. One should be at a right angle to the other, not laid down flat when they are that close to each other; one flat and the other upright on it's side is preferable unless they are spaced 3" minimum and 5" apart preferably/optimally. Space being a premium, mounting them at a right angle keeps them from interacting with each other and throwing off the x-over points as the arrangement shown will definitely do. That said, it would also be beneficial to purchase a shielded version of this driver too (you can also purchase high carbon steal shielding cups and shield them yourself). Placing the very substantial magnets (relatively speaking) of the woofer drivers so close to the x-over is bound to further change the properties of the coils in the crossovers in addition to the placement issue already noted. I've been doing this for about 40 years and must say, nice to see that the attention to detail and enthusiasm you exhibit still exist in this world of instant gratification, well done!
와...진짜로 하나도 스킵안하고 넋을 놓고 쭉 봤다..... 최고다. 저거 만들면서도 재미로 몰입을 한게 느껴진다.
Thank you!
Ok, I was optimistic that I could build this for the most part until he installed the crossover and whatever the rest of that was so, yeah, this is beyond my skill level. Nice work!
So it wasn't just me. I feel better now.
Aaron Anderson, buddy, my sentiment exactly! I tried to keep up with him. He left me in the dust when he started to take out the electrical toys.
The satisfying feeling of building something from scratch and the end result is love by millions of people 👍
Yup, why buy it when you can build it yourself at 3 or 4 times the cost?
You are not a DIY guy, you are an artist! Beautiful work.
Thank you!
DIY
와! 라는 감탄사에 딱 어울리는 영상. 처음부터 끝까지 넋놓고 보았다. OMG ~
Ahahah, this is not DIY, this is 100% professional... That's awesome!
Lol... because I thought I wanted to try this, but no!
Exactly
Its diy not 100% professional
Well I'm not surprised😂
This guy is at another level.
Yes man he is tech guy with a talent.
I thought this was going to be a simple diy project then this guy has every woodworking tool know to man, a 3D printer, and he’s an electrician. Good job though. It looks real nice.
I can't believe he didn't have a heat gun for the shrink tubing...
Haven't done this sort of stuff for a long time, but I started making my own speaker boxes with home-made crossovers over 35 years ago and this video has me all excited and inspired to build a nice bluetooth project for my shop now.. .. I love the concept of the tool batteries with a limit switch for safety and convenience of using dual power sources. Great video!
Thank you so much!
Absolute talent! Was thinking, if someone wouldn’t mind starting this project off for me... I’ll fix the handle on no problem, joint project! 🤓
I just watched a 36 minute video with full attention despite the fact that we all know I'm absolutely never going to take on such a project.
Thank you!
Ha ha....me too....bought the tools already but we all know it will never happen.
Hahaha same here.....😄
I never even realized it was 36 minutes long, I just thought, "oh this looks interesting". Great job. =(^.^)=
I really didn't notice it was 36 minutes until I saw your comment
Bro, this guy is really good with wood!
not only with wood ;-)
I’ve been told that too
I call him "Mr. Good Wood". He can use that name in Porn if this DIY thing doesn't work out.
one of the best and cleanest if not, diy bluetooth speaker that I've come across in youtube great job mate!!!!
Thank you!
if I hadn't watched this movie, I wouldn't have believed that it was made of the palette. Amazing job !!!!
The wood working had me mesmerized, couldn't stop watching. Realized early on that this was advanced and any illusions of me trying this were quickly tossed. THEN I SAW THE 3D PRINTER AND SHAT MYSELF!
Hahaha one time i thought if he can build an iron man suit. Haha
This video is so damn satisfying… it makes my mind at ease and I just fell asleep 😌…
Woodwork
Electrical work
Planning
Quality of tools you’re using
The neatness of your work environment
3D printing the drill base
Camera positions
Lighting
Everything is just perfect to watch…
Product is not the big thing here, the way you're making it, is...
Loved it
I've never seen anything like this before brother, very nice work,what a beauty.
That was really professional done.! Every step.. 10/10 That is a high end product you made sir 😎👍
Thank you!
60/10😄 amazing
Việt Nam à
A real masterpiece, the best Bluetooth I've seen so far. ✌️👏
This looks like a half hour Makita commercial. Like your skill. Good job.
Wow. I couldn't take my eyes off every detail you did. Your a genius. Love how it turned out. I love the JBL grills. I bet it sounds monstrous.
Thank you!
Well that's my problem, I need $6k worth of Makita tools. I knew I was doing something wrong. Seriously though this is the best tool commercial EVER!
😂😂
"Which tools do you need for this video?"
"Yes"
😂😂
You need at least $15k worth of tools, a $3000/month place to work on, $1500 in parts, and a few days of work.
I'll team up with you and we can make two of them. I'll put the two pallets
came for this!
This reminds me of when we use to stuff a car stereo into a tool box with an old radio shack power source. Cool Video VERY TALENTED WORK!
Thank you!
we did the same thing, because the german military g-wagon "wolf" doesn´t come with a stereo system. i assume that applies to almost any military vehicle.
@@YamahaYZFR6RJ05 p
Mono music in 2021?? I was born time, when mono was normal. Then they make stereo. I love stereo :D I don't understand new mono wave :P I like that you use pallets in your projects!
Yes, it is mono sound. That is a correct decision. There is no stereo sound when the speakers are so close, even if he chose to use stereo. The guy is a professional.
Big respect from Kislovodsk city, Russia!
Thank you!
Amazing! I really enjoyed this video. As a guitar-crafter I can really appreciate the quality of fit & finish - you are GREAT! 💖 🇨🇦
Man this is so cool!!! I would like to have one of those.
I got the pallet I just need the rest.
lol @ i got the pallet
I got the video. You want swap with your pallets?
@@storeforyou8761 😅
@@storeforyou8761 lmao 😂
My old man says you have a brain of a genius. And he reckons you and your partners have a great future ahead of you.Thank you for showing because he likes to build things from scraps which many people discard. Thank You and keep safe. GOLD BLESS! BYE
Thank a lot for your comment. Good luck to you and your old man!
Привет тебе из росссии !!! Ты просто человек с золотыми руками!!! Респект тебе!молодец!!!!👍👍👍👍
Вот ещё бы из красного дерева.
What an amazing example of ingenuity. I thought I might try when you started but watching was enough. Great job!
I have watched this build *without* interruptions, from start to ^Z!
Thank you!
Спасибо за видео! 36 минут настоящего удовольствия! Красивая работа! И аппарат получился люкс, это не JBL, даже не Harman Kardon и не Marshal. Это намного лучше! Удачи и успехов!
Thank you so much!
Dude, you have my undying love and respect. I enjoyed watching this video but it also serves well as simple background audio as I work. Thanks Man!
Thank you!
I went from excited and confident that I could build myself one of these, then it got real after the wood work was done. Was interesting to watch though, I leave disappointed in my lack of skills.
Same here! 😩
As much a matter of tools for the job as skills.
@@EliteRock My skills stopped beyond cutting the wood off the pallets
I'm sure it would be doable with all the right tools but it's would still be a month long project for the average person and cost more and sound worse than just buying a pre made speaker lol
What are you talking about? Everyone can do everything, if you set your mind to it. You think it's the first time this guy makes something like this? Naah fam you gotta try try try untill you get it right
Now we know why even mass produced bluetooth speakers 🔊 costs a bomb! and handcrafted masterpiece like this one is priceless! Gr8 work
My God, too bad we can only give one like. Phenomenal work.
Congratulations.
You gained another follower for the excellent video and work. Keep up with the amazing work.
Espetacular!
Prefiro ver isso do que ver aqueles caras construindo casa com piscina no meio do mato só com uma faca de cortar pão
Emanuel Costa digo o mesmo hehehe é muito satisfatório ver estes vídeos!
eu gostei deste vídeo da faca de cortar pão!
prefiro os caras no mato, pelo menos eu aprendo algo q posso fazer kkkk
eu já tava aqui pensando em juntar 30k em equipamentos (chutando em 2021), aprender marcenaria, eletrônica/engenharia de som, treinar bastante e só aí conseguir projetar uma caixinha dessa. Esse cara é um artista.
Concordo... Não adianta ser DIY pra fazer usando equipamentos caros fora de alcance. É até um trabalho espetacular, mas pra "faça você mesmo" não se aplica.
I didn't know there was such a complex and great skill and knowledge in a small speaker. You are so great and envious.👏👏👏👍👍👍👋😄
Thank you!
i think so.. hehe awesome work
@@KingMinhvuong n, yjnjnj,, uhyu, u
Meu Deus...
A palavra parabéns é nada para definir tamanha inteligência e precisão em conseguir realizar tamanha arte do artesanal ao eletrônico, lamentável ver a quantidade de pessoas que insistem em colocar defeito numa obra prima dessa magnitude, esses aí pra conseguir desenhar um zero só sentando pelado na areia.
Tentar desmerecer algo desse nível é uma doença incurável chamada (inveja).
Not only the skill in the build but also the vid it self, is gold standard !
A low budget speaker system. Maybe a few hundred dollars. Good idea😁. I only need 10-15k dollars equipment to build it😅
No Brasil, 30k 😂😂😭
Investment bro... To his future work on his channel
I disagree! you made it too cheap!!!!!
An amazing build! Jaw dropping. Well done and thank you!!! 👏
I would also add wire mesh covers for the speakers to protect them from accidental damage from tools or other objects that might get jammed into them.
Nhìn tên bạn thì có vẻ là người Việt Nam? Nếu vậy thì mình thật tự hào :)) Quá tuyệt vời. Cách làm việc chỉn chu như thế này, hay!
Holy cow this was absolutely amazing. You made this look so simple and the fact you added where to buy all these things is amazing as well. Personally I would still mess it up but this makes me want to try 😅
Easy, this seems very hard to pull off if you ask me, sure need good craftsmenship for this.
Yeah... this isn't nor looks easy in the slightest...
wooow - I love the idea of turning disposable wood to something great like this !!!
Não só o resultado final, mas a quantidade e a qualidade das ferramentas utilizadas na construção impressiona!
That's just genius and people like you, your creativity and ability to use old things and new things together in order to create something useful that people would appreciate every day.. I'm seriously awe struck and wish I had your ingenuity and talent.. I certainly hope you get paid well for your creations cause this is worthy.. Nicely done/
Thank you so much!
man that is very impressive you could easily start your own company.
Well, beautiful. With your skills and the money you can make, no more using stuff from "broken" speakers!
There is an art in reusing things
Brilliant project King. A serious piece of gear. Beautifully constructed and filmed. Enjoyed watching it immensely.
Thank you!
Woodworking and electronics. You are off the hook!!
Thank you!
Que obra de arte meu caro! Parabens nota 1000!!
30:06 - This is a mono (1 channel) speaker correct? Looking at the top part of the diagram, all the speakers are connected to one channel.
30:32 - You don't need to remove the battery when connecting an adapter. There are Dc Power Connectors with power cut off function. If you route the battery connections through that kind of connector, the power from the batteries will be disconnected when a male DC connector is inserted.
Good wood work! Congrats on the build.
BT is mono no?
@@batvetteBluetooth is Stereo usually
@@Vighnesh.M.Productions yeah I was confused because all the bt speakers ive owned even that had 2 or more identical drivers played in mono. Dumbed down for the masses? I have a pair of sennheiser bt headphones, gonna check those tonight see if theyre mono. If so, hi-fi is dead!
@@batvette Indeed that is a sad thing. Jbl charge 3 is stereo but the charge 4 is mono.
amazing building quality, congrat... Just a bit sad that you use only one channel of the sound. why do not use two amplifier en isolate boomer from medium ?
Thank so much. I just want to experience mono board.
A real pleasure to watch. The Makita battery pack idea is brilliant. Well done!
would it be possible to include a list of tools used? awesome vid btw!
I will save myself from ruining the project and buy this speaker from you for $500
The Way He Makes Bluetooth Speakers, Is Very Very Very Impressive. I Love It So Much. ❤🎵🎧
Thank you!
@@KingMinhvuong Your Welcome My Friend. 😄🎵🎧
Welcome to another episode of "What You Tube has recommended me today"
aha same for me !
@Sorry, i dont Get it HU
@Sorry, i dont Get it t
I THINK ILL JUST BUY RATHER THAN DOING IT . THIS GUY IS GOING PLACES
Holy Clamps Bro! I wish I had that many clamps!
Nice build!
Keep up the good work.
Thank you!
This is insane. A beautiful display of a deep understanding of how the world works, along with very skillful mastery of applying multiple disciplines/skills to work together to form such a masterpiece.
Thank you a lot!
excelente trabajo, es una obra de arte, tanto en la madera como la parte tecnica
this is most cool thing i ever seen...
Coolest*
youtube: do you want to see how to build a bluetooth speaker with the tools you don't have?
Me: why not?
Well, I started out watching and thinking to myself ‘yeah, I might build this pallet project’, and then 😂😂😂😂😂😂😂😂😂😂 - I just start laughing as it gets more and more complicated. I look over at my little Bose bluetooth speaker and think ‘yeah, that still sounds pretty good’! 😂😂😂😂
King - you ROCK man! Excellent skills, fabulous ingenuity, fantastic re-purposing of old electronic switches, etc.!
such an incredible design, and enjoyable video thank you so much! i really appreciate all the work you did to design, create, and produce this, absolutely incredible!
That was amazing. Very smart. Wish I had the ability to make something like that.
You can with a little research practice and believing in yourself that you can .
Did you put Insulation mats inside ? It really helps the bass to get volume and depth
When I look inside the subwoofer in my living room I can see that white fluffy stuff, how does it help the bass?
@@defnotatroll i cant tell how it exactly works without looking it up. But it helps a lot. Its getting deeper and louder and more full.
Wow....you are one talented dude. And i can tell by the way you work very detail oriented and meticulous. you need to sell your products!
awesome.
Esse foi o melhor projeto que eu já vi aqui no TH-cam.
That's awesome, the only thing I would of done differently is to tongue and groove the bottom and top pieces instead of simply gluing them together; it would ensure a better hold and make it less likely to come apart if it was ever dropped or had a sudden impact.
Truly incredible and inspiring. I have decided I will make my own as well after seeing this, thanks so much for the upload!
Espectacular 👏💪 lo único que no me gustó es el botón de encendido, le hubiese puesto uno circular metálico a tono con las perillas del amplificador, lo único porque todo lo demás es realmente espectacular, felicitaciones y mis respetos
Was that pallet made from oak ? seems like you found the nicest pallet i have ever seen
Круто смотреть одно удовольствие 👍 обожаю такие колонки