Great content! I would love to also see the code of the controller, either in a blog, or in a secondary channel, it will probably be boring video content for 90% of people
I have an E110 I just rebuilt a few years ago. Sill need to find a good source for the filter cartridges. probably need to dig into the servo in the next while as it is jumpy on occasion.
@@baxedm9806 the manual is amusingly vague on the cooling water requirements. it says water below 120 PSI and a 3/8" line. In practical operation I have run it with out a chiller and on a glycol building loop. the machine only takes 2.5-3 Kw so the amount of heat going into the 20 gallons of dielectric fluid is not crazy. i never really noticed any difference running with and without water. After the move in the next month I think I will be setting it up with a 1/2 ton glycol chiller and removing the water control valve.
That is just great for your kids! Customer want's a change, just update the software. Tell them Elon's people do the same thing on the Tesla. You might be surprised at how many, even very young, kids know what a tesla is.
Thats a happy kid, good job DAD
Supergaaf project. En mooi om te zien dat je zoon al kan fileparkeren.
We would love to take virtual tour of your workshop 😊, awesome content.
NICE CONTENT,,, MORE OF YOUR OTHER PROJECTS PLEASE...REGARDS FROM THE U.K.
Great project
Great fun Buddy! Those are some luck kids! Thanks for sharing!
Holy Crap the intro made me think I clicked on a This Old Tony video..... LoL
thanks alot for showing me them boltable bearing holes!!
You just saved a thousand bucks (inflation-correct for 2020) in driving-lessons/reverse-parking for your kids ;)
that was great. Thanks
Looks awesome needs a little ballast on the front end ha ha ha ha peace brother
Blij dat het daar goed gaat in deze tijd :)
Great content! I would love to also see the code of the controller, either in a blog, or in a secondary channel, it will probably be boring video content for 90% of people
I agree, I would love to find out more because it’s an interesting thing to build. Dare I say even more interesting than the EDM ;).
Good job! Your son’s voice is your reward.
why you don't use cheap continuous variable gear
Looks to be too much fun, send the kart here and I'll make sure to dri...dispose of it properly :)
I have an E110 I just rebuilt a few years ago. Sill need to find a good source for the filter cartridges. probably need to dig into the servo in the next while as it is jumpy on occasion.
Hi, thats nice to know! What do you use for cooling? A running tap, or a water chiller? Im trying to figure out how much cooling capacity it needs.
@@baxedm9806 the manual is amusingly vague on the cooling water requirements. it says water below 120 PSI and a 3/8" line. In practical operation I have run it with out a chiller and on a glycol building loop. the machine only takes 2.5-3 Kw so the amount of heat going into the 20 gallons of dielectric fluid is not crazy. i never really noticed any difference running with and without water. After the move in the next month I think I will be setting it up with a 1/2 ton glycol chiller and removing the water control valve.
now you can easy get your son to mow the lawn by attaching a mower deck. 🤣
Looks great! But it seems to me that the center of gravity is shifted to the rear of the car.
Great project and well done! Future upgrade thought: regenerative braking.
That is just great for your kids! Customer want's a change, just update the software.
Tell them Elon's people do the same thing on the Tesla.
You might be surprised at how many, even very young, kids know what a tesla is.
This is the first electrical mini car. So as this car was Tesla in the beginning.;-)