VESPA ENGINE REBUILD 🔩| Part 7 | CLUTCH | Tutorial {English}

In this Series we'll show you how to rebuild your own large frame Vespa engine. New episode every Wednesday! www.sip-scooter...
---------------------------------------------------------------------------
Following parts and tools were used in this episode:
www.sip-scooter...
---------------------------------------------------------------------------
More information, like the list used in this video, you'll find here:
sip.shop/check...
-www.sip-scoote...
---------------------------------------------------------------------------
Did you enjoy this video? Please leave a like, subscribe to our channel, activate the bell and share this Video. Any Questions? We are happy to help you in the comment-section below!
Music used:
In Time - Dylan Emmet: • In Time (Instrumental)...
Wings of Norway - Scandinavianz: • Wings Of Norway - Scan...
Lodi - Pali Gap: • Lodhi - Pali Gap (No C...

[@kimjon3774]

Thank you, really helped me work through the process

[@palemale2501]

There seems to be missing here a special thick square washer on the secondary shaft, put on before the locking nut - a much ;later retro-designed fix to avoid some engine casing cracking.
Seems any stresses from secondary shaft onto its thin casing, are instead crudely transferred to adjacent clutch housing and also final drive casing - for adverse loads when changing gears.

[@justplaymusik1748]

*SIPscooterTutorial* I would like to see this video again😍😍😍😍😍😍

[@Jpmam832]

Hello pls make sure the clutch torque value you say 45 newton meter but when you apply the torque wrench, you set at 15 newton meter...so which one is correct?

[@babercobaig9844]

Hi sir i did seals of road and cover.. after that i gret chuk chuk sound. Can you please help

[@babercobaig9844]

Sor if u can help me. When i press clutch i get ratle sound from my vespa super 1975. What is that sound coing from

[@nvdb-77]

Small translation error when tightening clutch nut, text says 15 Nm, engine builder says 50 Nm. :)

[@hansroelvink2670]

I have installed my clutch, but my cover is not closing tightly without mounting the 3 bolts. This is effecting that the clutch is already activating a little, it's pressed by the cover so the engine is in free position. I don't understand why. I need to say that I have split the engine, put new bearings and gaskets and mounted again. Maybe I did something wrong. It's a Vespa engine VBA 1 M from 1961.
Do someone know what's wrong?
Kind regards
Hans

[@vespasandengines]

Which clutch is featured?

[@SIPScootershopTV]

SIP performance