Thanks for this. It's very helpful. I am new to turntables and just purchased a vintage 601. I have no clue what I am doing, but look forward to getting into it!
Just going to be pedantic here. The 1010 and 1015 are a little different, so this is only for 1009 and 1019 turntables, but the principles obviously are the same :). The 1015 as a geared knob to adjust the wait, which in some ways is easier, but not as accurate. Thanks for a really detailed video. Still useful 10 years later :)
Excellent instructions. Leveling these 1000 series Duals with a bubble level is not critical however because the tonearms are dynamically balanced(spring loaded) Visually it would be helpful though.
Thank you for making this video! It's the most straight forward, clear and intuitive instructional that I can find! I have a 1019 and slowly learning more and more about it. I do have a question - can anyone tell me to do with the anti skate once these adjustments in the video are made? Anyone with 1019 experience able to help? Thanks!
That spring mechanism for setting VTF is a great idea! Rather rare indeed! The Dual 1009 is a "sleeper" among vintage TT's! And it's capable of sounding quite fine, indeed! Probably best used with a low-compliance mc cartridge, like a Denon103.
Nice demo...clear...I have a 1209 I have a tone arm issue that does not return to its resting space...and and a more serious problem I can't figure figure out...stylus skips or loops...and the to tone arm wants to pull away from the center...
Refat Rabadi If the arm doesn't return then it's time for clean, lube and adjust. vinylengine.com has your service manual! As far as the arm moving away from the center it could mean, all things else being equal (like the leveled turntable) that the antiskating is negative. Put it in zero to start with. Good luck!
What a great video thanks for sharing. I have a 506 I e mailled another guy who had one almost like mine (a 505) & maybe you can help me the other guy has not replyed. My problem is after I balanced the tonearm when I go to put the styles pressure setting on the needle, The needle hits the lp even when the cueing lever is in the up position, I tryed to move the tonearm counterbalance back butI have no luck I even tryed to use one of those shure gages but on luck any help would be great thanks. Paul..
Help! My 1019 has slow sleep and I have lubed it. It all looks great and all works except the speed. I already tried to adjust the spindle height but I can’t anymore or else it hits the platter. Please help.
Very helpful to see. I was not familiar with these turntables and a bit confused by extra dials on the tonearm. This cleared it up perfectly.
Thanks, this will help me to setup my Dual 1019 Turntable tonearm. It’s good to see it being done.
Thanks for this. It's very helpful. I am new to turntables and just purchased a vintage 601. I have no clue what I am doing, but look forward to getting into it!
Thanks very much for this clear and helpful guide!
Just going to be pedantic here. The 1010 and 1015 are a little different, so this is only for 1009 and 1019 turntables, but the principles obviously are the same :). The 1015 as a geared knob to adjust the wait, which in some ways is easier, but not as accurate.
Thanks for a really detailed video. Still useful 10 years later :)
People do not give these tables enough credit for the precision they were designed with.
Excellent instructions. Leveling these 1000 series Duals with a bubble level is not critical however because the tonearms are dynamically balanced(spring loaded) Visually it would be helpful though.
Thanks for a wonderful guide. Helped me set up my dual!
I realize it is kinda randomly asking but do anybody know of a good place to watch newly released tv shows online?
@Julian Jackson I would suggest flixzone. Just search on google for it =)
@Julian Jackson I watch on FlixZone. Just search on google for it =)
Thank you for making this video! It's the most straight forward, clear and intuitive instructional that I can find! I have a 1019 and slowly learning more and more about it. I do have a question - can anyone tell me to do with the anti skate once these adjustments in the video are made? Anyone with 1019 experience able to help? Thanks!
Great video, this helped me with my setup.
Glad it helped! Thanks for telling me.
That spring mechanism for setting VTF is a great idea! Rather rare indeed! The Dual 1009 is a "sleeper" among vintage TT's! And it's capable of sounding quite fine, indeed! Probably best used with a low-compliance mc cartridge, like a Denon103.
Robert Jermantowicz Agreed.Thanks for adding to the discussion. I now use a 1229.
Thanks for this! Now I know what to do.
Very good instructional video!
Thanks for this!
Outstanding. THANK YOU!
The counterweight on the stem is screwed on backwards. The .1 gram silver markings should be toward the front.
Pat Leaver
Indeed !!!
You're right. Of course, it makes no difference to the principle or the sound! But thanks for pointing it out!
I put leveling feet on my plinth. It also provides a bit of needed isolation.
Nice demo...clear...I have a 1209 I have a tone arm issue that does not return to its resting space...and and a more serious problem I can't figure figure out...stylus skips or loops...and the to tone arm wants to pull away from the center...
Refat Rabadi If the arm doesn't return then it's time for clean, lube and adjust. vinylengine.com has your service manual! As far as the arm moving away from the center it could mean, all things else being equal (like the leveled turntable) that the antiskating is negative. Put it in zero to start with. Good luck!
What a great video thanks for sharing. I have a 506 I e mailled another guy who had one almost like mine (a 505) & maybe you can help me the other guy has not replyed. My problem is after I balanced the tonearm when I go to put the styles pressure setting on the needle, The needle hits the lp even when the cueing lever is in the up position, I tryed to move the tonearm counterbalance back butI have no luck I even tryed to use one of those shure gages but on luck any help would be great thanks.
Paul..
Help!
My 1019 has slow sleep and I have lubed it. It all looks great and all works except the speed. I already tried to adjust the spindle height but I can’t anymore or else it hits the platter. Please help.
Good information
great thank you
For the 10-series, should the anti-skate be set to the same as the VTF?
Yes, according to manual , if the stylus spherical radius is 16u, then 1:1
hello - what if anything could make a 1009's mute switch mute in play position? - it seems that way on my 1009 - I get no music in play position