Naviforce NF9136 How to adjust the modes of multifunctional watch? (Operational Steps)

This video aims to introduce the operational steps of different functional modes of Naviforce watch.
We got the NF9136 with five functional modes, ranging from Timer Mode, Alarm Mode, Chronograph Mode, Dual Time Mode to Countdown Mode.
Firstly, I am supposed to present you the key components involved during this adjustment process.
The button on the top left side of the watch is named button A.
In counterclockwise order, the second button is button B, the third one is button C and the fourth one is button D.
The mark displayed in this area is a simple criteria for judging what function is operated.
When a figure appears on the display, it turns out that the watch is in the Timer Mode.
When SP appears, it indicates the Chronograph Mode, AL indicates Alarm Mode, TR indicates Countdown Mode, and T2 indicates Dual Time Mode.
Locate the button B and press it to change your watch into the mode you want.
Next, I will show you how to set the time, such as 2018.11.28, 17:10.
First of all, press button B to select the Timer Mode.
In timer mode, press and hold button D to display the month and date.
Press C to enter time setting state and “Second” would blink.
You can press D to adjust “Second” to zero.
And then press B to select the other items in turn.
Press button D to adjust the flashing item, so we adjust the value of hour to be 17.
It will cycle through settings in order from the least to greatest, (like 1 minute to 59 minutes)
The hour setting is done. Press B to switch into “minute” and adjust it to be 10.
switch into “month”; choose November,
date is 28
Switch into week. It is on the left area. Press D to choose the week.
And switch into 12/24-hour Time Format. press D to switch between two Time Formats
Finally, press button C to confirm and return to time display mode.
Press B button to select the Chronograph Mode.
Press button D to start timing and press button D again to stop timing. When stopping timing, press C to reset the mode.
If you would like to have split timing measurement, press button D to start timing firstly.
Press C to activate split timing measurement with the signal of SPL.
Press C to deactivate the split timing measurement.
Press D to stop the timing and press C to reset the mode finally.
If you want to get the finish time of two competitors, you need to press button D to start timing.
And press C to activate split timing measurement when the first competitor breasts the tape, indicating his finish time.
When the second competitor breasts the tape, please press D.
And press A again to deactivate the split time measurement, indicating the finish time of the second competitor.
Press C to reset the mode in the end.
If the chronograph is not stopped, it will continue to test the time. And when it reaches the limit, it will restart timing again from zero.
Press B button to select the Alarm Mode.
Press D to activate or deactivate the alarm and hourly chime function.
When the signal of AL appears in the lower left corner, it turns out that the alarm function has been activated.
When a horizontal line appears on the label of SIG, the hourly chime function would be activated.
If you would like to set the Alarm, such as 7:20.
Press C and “Hour” will blink. press D to adjust the the hour to be 7. Press B to switch into Minute, adjust it to be 20.
And press B again to select “Alarm 1 / Alarm 2” of the alarm.
Press C key to confirm and return to Alarm Mode.
When reaching the preset time, the alarm would alarm for 15 seconds and then automatically stops . Press any button to stop the alarm.
Press B button to select the Countdown Mode.
For example, we have to set a countdown of 1 minute and 10 seconds.
Press C and “Hour” will blink; then press B to select “Minute” and “Second” in turns.
Press D to adjust the minute to be 1 and set the second to be 10.
press C again to finish the setting.
When time is set, press D to start the countdown function. If you want to stop the countdown, you can press D again.
When the timer counts to the last 10 seconds before it ends, it utters beep sound once per second in the last ten seconds.
And when countdown ends, it will utter beep sound three times per second in the following 10 seconds.
Press B button to select the Dual Time Mode.
Only the value of hour can be set in dual time mode, but the minute and second are not able to be changed.
press C and “Hour” will blink.
Press D to adjust the value, like 8.
The hour setting is done.
Press C to confirm and and return to dual time displaying mode.
Available:
Aliexpress:es.aliexpress.com/store/produ...
Twitter: / naviforcewatch
Facebook: / naviforce.gov

[@ahmedgerman28]

Thank you very much, from egypt ❤️❤️❤️❤️❤️

[@Headshot99]

I have this watch but I can't change time....after watching this video I know all setting thanks for making this video ☺

[@RamSharma-wn1xw]

My navyforce watch's analog watch is not working but digital watch is working. What may be the reason?

[@My_Life_Is_Like_This]

Hi