I use lamicut lisec, it's amazing machine. Top cut wheel pressure is set at just over 2bar same bottom cutter. The roller is set at 1bar for 6.8 and 1.6 bar for 8.8. In the process of leveling out some boards. Can you confirm the pressures you use for cutting laminated glass 6.8 up to 14.8?. Massively impressed with lisec cutting
Thank you for your kind words, we appriciate your feedback. Concerning the cutting wheel and breakout roller pressure: For 6.8 (33.2) we are using a 145° cutting wheel @ 1,7bar cutting pressure and 1,6bar breakout roller pressure. For 8.8 (44.2) we use a 155° cutting wheel @ 2,4bar cutting pressure and 2bar breakout roller pressure. For 14.8 (66.4) we use a 155° cutting wheel @ 2,8bar cutting pressure and 2,4bar breakou roller pressure. Hope this is usefull for you! Maybe for your interest, we are offering now a retrofit package for our patended SIR heating system. This system is used also @ our VSL-A laminated cutting maching. The heating bulbs are just 900mm long and much more powerfull. The heating time could be reduced to arround 7s which will boost your cutting capacity up to 10% / hour. :) For more information get in touch with sales@lisec.com our with your LiSEC sales representative!
Thank you so much for your reply!. May I film a video send via email the cut and pressures, your thoughts very much appreciated. Interested in heat bar we use single heat bar.
Unfortunately, this machine is no longer available. Our high performance automatic cutting machine for laminated glass, the LiSEC VSL-A might be of interest to you. You can find a video about it on our TH-cam channel. For more information about the machine, please visit our website www.lisec.com.
Your machines are amazing! Working in one of many plants in Poland supplied by your machines ;)
Thank you! :)
I use lamicut lisec, it's amazing machine.
Top cut wheel pressure is set at just over 2bar same bottom cutter. The roller is set at 1bar for 6.8 and 1.6 bar for 8.8.
In the process of leveling out some boards.
Can you confirm the pressures you use for cutting laminated glass 6.8 up to 14.8?.
Massively impressed with lisec cutting
Thank you for your kind words, we appriciate your feedback. Concerning the cutting wheel and breakout roller pressure: For 6.8 (33.2) we are using a 145° cutting wheel @ 1,7bar cutting pressure and 1,6bar breakout roller pressure. For 8.8 (44.2) we use a 155° cutting wheel @ 2,4bar cutting pressure and 2bar breakout roller pressure. For 14.8 (66.4) we use a 155° cutting wheel @ 2,8bar cutting pressure and 2,4bar breakou roller pressure. Hope this is usefull for you! Maybe for your interest, we are offering now a retrofit package for our patended SIR heating system. This system is used also @ our VSL-A laminated cutting maching. The heating bulbs are just 900mm long and much more powerfull. The heating time could be reduced to arround 7s which will boost your cutting capacity up to 10% / hour. :) For more information get in touch with sales@lisec.com our with your LiSEC sales representative!
Thank you so much for your reply!.
May I film a video send via email the cut and pressures, your thoughts very much appreciated.
Interested in heat bar we use single heat bar.
Where can i get this machine?
Unfortunately, this machine is no longer available. Our high performance automatic cutting machine for laminated glass, the LiSEC VSL-A might be of interest to you. You can find a video about it on our TH-cam channel. For more information about the machine, please visit our website www.lisec.com.