I was first about to pass this video because of the clickbait thumbnail but there really are many useful tips in this video. I personally use many of them but found few new ones so thank you.
These are really simple but great techniques. Might make the observation that making a holder to avoid hitting your fingers with a hammer is neat, but so is wearing a pair of gloves when angle grinding or cutting towards your fingers with a box cutter...(not being a smart *** saying that, just someone who found out the painfully hard way :( Keep the vids coming, this is really good stuff!
im a bit obssessive compulsive with the things that I do thus making things clean and accurate as much as possible everytime I do something. those hacks are extremely hopeful and I really learned a lot on those.
I appreciate how you explain this topic clearly. Your passion for your TH-cam channel is evident. Your content has given me some great ideas for potential new videos. I'll be sure to follow your work and share ideas!❤😁
If the core has frayed and no longer tightening you can either try larger screws, pack the holes with bits of timber (match sticks will work), drill larger holes and plug with wooden dowels and pva glue then you can put screws into the newly secured dowels. Depends on how bad it is.
20% работают, а остальные либо полнаяерунда,либо работают только для лёгких условий, например первый лайфхак не расчитан на давление и остановит воду только если она идёт самотоком.
*Hello. Cool video. It's always interesting to watch how professionals work* 😃
Which professional? Half of the tips weren't even worth filming.
This video has things that I'll actually use 👍 👍👍👍
Tôi học hỏi được nhiều kinh nghiệm và mẹo hay. thank you very much
Merci pour ces astuces !!👍
😉👍🤝
@@umelec-diy😊
This may be the most helpful tip video I have ever watched.
A lot of good tips on this one, thanks.
😉👍👍👍👍👍
Such simple and very useful tips, well done
Consejos de gran utilidad, gracias por compartirlo
I was first about to pass this video because of the clickbait thumbnail but there really are many useful tips in this video. I personally use many of them but found few new ones so thank you.
These are really simple but great techniques. Might make the observation that making a holder to avoid hitting your fingers with a hammer is neat, but so is wearing a pair of gloves when angle grinding or cutting towards your fingers with a box cutter...(not being a smart *** saying that, just someone who found out the painfully hard way :(
Keep the vids coming, this is really good stuff!
Good video.
😉👍
SUPER👍
im a bit obssessive compulsive with the things that I do thus making things clean and accurate as much as possible everytime I do something. those hacks are extremely hopeful and I really learned a lot on those.
A lot of good tips very handy to know about thanks.
so helpful, you are my dream
Про магнит с пакетом не додумывался раньше, гениально!
И про сверление круглой трубы со скотчем
💪👍👍👍👍
Amazing
2:31 just push the nut to the material, and put night pressure to it. Look true the hole until it’s on the right spot. Much easier
This is why the INTERNET exists, there is 1000 years of learning here if you were figuring it out alone.
The photo in the thumbnail doesn't appear in the video. Otherwise good tips !
I appreciate how you explain this topic clearly. Your passion for your TH-cam channel is evident. Your content has given me some great ideas for potential new videos. I'll be sure to follow your work and share ideas!❤😁
Who is writing the captions? You are calling a screw a nail , a bolt a nut , whats going on here?
Lost in translation bro
There is no excuse for inaccuracy . . . That is why editing is is done
Самая лучшая подсказка-Пружинка на верёвочке.
ДАЁШЬ патент!!
Спасибо🙏💕
Good
THX
Great tips. Do you have a video on how to tighten hinge screws on a hollow core door.
If the core has frayed and no longer tightening you can either try larger screws, pack the holes with bits of timber (match sticks will work), drill larger holes and plug with wooden dowels and pva glue then you can put screws into the newly secured dowels. Depends on how bad it is.
👍👍👍👍👍👍
The hammering a nail with a dowel,. I still have half a thumb nail because I missed the real nail over 20 years ago.
Cool
Some nice tips, but what was the thumbnail about?
👍👍👍👍👍
I hate when the pictures in the thumbnail are not in the vidoe at all.
cool
20% работают, а остальные либо полнаяерунда,либо работают только для лёгких условий, например первый лайфхак не расчитан на давление и остановит воду только если она идёт самотоком.
😁👍🏼
i loved the video ande tips but that music was torture
First
👍
Last time I was this early my girlfriend gave me dirty looks for a week.
that music is aweful
some are imortant and some are idiotic idea.
Most are obvious.
I was here for the thumbnail. Its not there the rest is bullshit
Половина - это какая-то лютая дичь
OLA BOA NOITE,/SXT FER.22/09/2023.OK