Smith medical Level 1 Patient Warmer | How to replace filter | How to reset warmer | How to use

How to use
how to replace filter
how to reset warmer
Hose pipe installation
#warm #summer #love #nature #sun #beautiful #photooftheday #instagood #photography #winter #sunny #sky #sunset #hot #sunshine #cozy #fun #happy #night #fashion #spring #summertime #art #autumn #cute #home #cold #weather #clouds #bhfyp

[@muhammedanees752]

Good information 😍

[@biomedicaltutorials139]

Thanks

[@jeancarloscarvajal7082]

The filter was cleaned, but the maintenance alarm does not go off

[@jeancarloscarvajal7082]

how to turn off alarm settings

[@instantchow]

Anyone have the dimensions for this filter I'm having trouble finding

[@piraanaworld9215]

Hello, My machine is getting on but no air circulation.it's giving air blockage indication and service key indication is blinking.what might be the reason? I cleaned the air filter and removed and reconnected the sensor which is shown in your video.but still it's not working

[@biomedicaltutorials139]

Change filter, If problem not resolved then blower is faulty

[@piraanaworld9215]

@@biomedicaltutorials139 thankyou for your reply.. i tried running the machine without filter, but it's not happening

[@biomedicaltutorials139]

There is a push button below the filter area. To check the run machine without a filter that button should be pressed. Please note, running a machine without a filter is not recommended, it will damage the blower in the long run.

[@jailanimukhtar4082]

Hi miss. How to clear spanar key alarm?

[@biomedicaltutorials139]

check for the filter and hose pipe this alarm usually comes from that error

[@pushpendrakumar-lt1zn]

What can I do

[@biomedicaltutorials139]

can you please elaborate your question

[@pushpendrakumar-lt1zn]

Settings light blinking

[@biomedicaltutorials139]

This is might be a temperature sensor issue, try by replacing hose pipe and filter.

[@amruthaku1030]

Hi, Machine showing air blockage indication.intermittendly machine is working
What might be the reason?

[@biomedicaltutorials139]

Change filter

[@amruthaku1030]

@@biomedicaltutorials139 if hose pipe is faulty,how can I make out?

[@amruthaku1030]

Because it's giving service key indication continuously
Nd it's works for two minutes and automatically went off.. sometimes I feels whe i remove hose pipe it's working for a bit long

[@biomedicaltutorials139]

For service error try key combination shown in video

[@biomedicaltutorials139]

Also there is a samll circuit at the end of hose pipe, might be it is faulty. There is a feedback temperature sensor in this circuit