430 - HGUC Gundam Mk-II AEUG Revive Version (OOB Review)

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ต.ค. 2024

ความคิดเห็น • 122

  • @RedCometZakoo
    @RedCometZakoo 2 หลายเดือนก่อน +1

    The Mk-II is one of my favorite Gundam MS. I just ordered this one, and I’m excited to put it together. I love how each version of it looks slightly different, but all look like the MK-II.

  • @StrutTheEmo27
    @StrutTheEmo27 7 ปีที่แล้ว +90

    Bandai should've used this as a remold for the Gundam Alex

    • @Erdrick68
      @Erdrick68 6 ปีที่แล้ว +4

      They have now released 3 new 0080 MGs in the last year with several P-Bandai recolors with different accessories and they have all been absolutely awesome, but the 1 damn MG we want, an Alex 2.0 is no where to be seen. I'm really hoping it will just be a surprise release with only minimal heads up time. I mean were are getting that awesome new Robot Spirits figure this year, so I guess that should mean something.

    • @person906
      @person906 2 ปีที่แล้ว +3

      They don't have a lot in common at all. Alex could probably use the hazel/quel frame since the backpack is the same as the quel at least. The chest is about the same as a gm command which the gm quel chest is based on.

  • @joadarium9605
    @joadarium9605 3 ปีที่แล้ว +18

    Genuinely *love* the Revive MK-II's both AEUG and Titans version. I like them more than the RG one's design wise because they have that charming anime accurate appearance and aren't overly detailed and hold together solidly. Although there is no toe-bend, I still love the amount of articulation. Although yes, it may not be anything too special with accessories but you could get the old HGUC G Defenser attachment and make a custom Super Gundam Revive! Not a bad idea now that I think of it. Overall, I give it a 10/10 in my book

  • @thiagomonteiro41
    @thiagomonteiro41 8 ปีที่แล้ว +40

    Man, these Revive kits are looking so f***ng good! I have to get'em!
    And, Zaku, your reviews are only getting better and better. Thank you so much for your amazing work!

  • @GrieveIV
    @GrieveIV 4 ปีที่แล้ว +9

    The shield does collapse, although it isn’t how it appears in the anime. The lower half plugs into that red part

  • @skyblailock7248
    @skyblailock7248 2 ปีที่แล้ว +4

    The shield can go into its collapsed form by placing the peg into the red part.

  • @anonymousli4204
    @anonymousli4204 7 ปีที่แล้ว +2

    I had the same problem with my 144 Victory 2 Gundam with waste disconnecting from the Torso. I put a drop of paint in the connector piece on the Torso and rolled it around to get an even coat and it made it a lot tighter. while holding it by the Torso and trying to shake off the legs it remained intact to my pleasant surprise so Victory 2 Gundam just got a lot more poseable. I was able to get it into a really nice crouching pose

  • @LatencyProblem
    @LatencyProblem 8 ปีที่แล้ว +5

    This should be the kit to make the Build Gundam MKII. Dammit bandai!

  • @PhantorumPrime117
    @PhantorumPrime117 4 ปีที่แล้ว +3

    Just finished building this bad boy, last night. It was the first gunpla I ever built

    • @mogumoguokayu1418
      @mogumoguokayu1418 3 ปีที่แล้ว +1

      nice my first one was from iron blooded

    • @PhantorumPrime117
      @PhantorumPrime117 3 ปีที่แล้ว

      @@mogumoguokayu1418 I got some more after the MK-II, the HG Hyaku Shiki, the RG Nu Gundam, the HG Zeta Gundam, and the HG Gouf Custom

  • @foofsage
    @foofsage 8 ปีที่แล้ว +5

    Since the parts of the AEUG and Titans version are the same, could you swap out parts to make them a mix of both?

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว +2

      Yes, of course.

    • @joadarium9605
      @joadarium9605 3 ปีที่แล้ว

      Wouldn't suggest it because it'll look weird, but yeah lmfao

    • @kidrobot.
      @kidrobot. ปีที่แล้ว

      ​@@joadarium9605 not really

  • @ThatReviewerGamer
    @ThatReviewerGamer 8 ปีที่แล้ว +1

    Is the red part of the V fin compatible with the RX-78-2? I lost the part and i'm thinking on buying this model and making a mold or something :,(

  • @YiminyCricket
    @YiminyCricket ปีที่แล้ว

    is this version of the Mk II compatible with the old HGUC G-Defenser?

  • @nicom.114
    @nicom.114 7 ปีที่แล้ว +18

    Watching again a year later bc I have it shipping in soon and an idea just hit me: RX-178 Thunderbolt Sector. IT WOULD BE SO BADASS

  • @X07Strike
    @X07Strike 8 ปีที่แล้ว +1

    Do you think this will work with the build mkII from build fighters? The backpack and arm guards prob. But the chest piece and head?

    • @X07Strike
      @X07Strike 8 ปีที่แล้ว

      Build mkII parts*

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      The chest piece, I think won't fit as-is, but that would be pretty easy to modify i guess. And the head, just switch it off.

  • @jae5507
    @jae5507 7 ปีที่แล้ว +2

    Im thinking of buying this and using it as a base of my custom gundam so I have one question. Is the Ballden Arm Arms compatible with this RX? thanks

    • @bachnguyen6871
      @bachnguyen6871 3 ปีที่แล้ว

      As long as it have 2 3mm hole on the back it will be fine

  • @dannyl3894
    @dannyl3894 8 ปีที่แล้ว +1

    Zach, Is this revived kit better than the rg normal mk ii?

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      +Danny Lee depends on you~ The Revive is cheaper and looks really nice. The RG is also nice, lots of detail.

  • @Greyyy2442
    @Greyyy2442 8 ปีที่แล้ว

    Zach, which one do you think are better for straight build Gunpla competition
    is it hg mk-ii aeug revive or hg gyan revive???

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      Both are great. Mk-II has more weapon options, but Gyan is better for posing though I think.

    • @Greyyy2442
      @Greyyy2442 8 ปีที่แล้ว

      +ZakuAurelius so if you enter a straight build competition like me what gunpla will you choose??

    • @helsing5661
      @helsing5661 7 ปีที่แล้ว

      What is a straight build gunpla competition?

  • @grimmestcreaper2212
    @grimmestcreaper2212 7 ปีที่แล้ว +1

    Does the Shoulder armor on this kit work on the HG Revive RX-78-2?

  • @haroldzh.8446
    @haroldzh.8446 6 ปีที่แล้ว +2

    great thing with most hg is that pieces and parts doesn't pop off easily, when you are posing or playing a round with it.

  • @adrindratazainal9924
    @adrindratazainal9924 8 ปีที่แล้ว +5

    does the HGBC Build Booster mk-ii works with this kit?

    • @Ldad27
      @Ldad27 8 ปีที่แล้ว +3

      prime92 tried to do it in her review, the chest part and v-fin don't fit, but the arm parts and back work on it.

  • @Arrowdodger
    @Arrowdodger 8 ปีที่แล้ว +2

    The vulcan pod has kind of grown on me, I used to dislike it.
    Glad this looks like a really nice kit, the Mk II has generally had good luck with having good kits for the time they come out, and this is no exception.

  • @skuffles
    @skuffles 8 ปีที่แล้ว +2

    I feel they should always make the kits so the weapons can go in either hand for all those Left Handed (and symmetry enthusiast) modelers out there :) Well... that's under the assumption that Gundams are all ambidextrous. Thanks for mentioning that ability on this kit!

    • @hiruma4142
      @hiruma4142 8 ปีที่แล้ว

      The only left-handed pilots are from Zeon and Graham Aker lol

  • @Lierbag521
    @Lierbag521 8 ปีที่แล้ว +2

    the shield can be collapsed. you can plug in the bottom half onto the red slit on the top of the shield

  • @029_muhammaddavianrusdians4
    @029_muhammaddavianrusdians4 7 ปีที่แล้ว +9

    u can colapse them by plugging the peg to the rectangle hole

    • @anonymousli4204
      @anonymousli4204 7 ปีที่แล้ว +1

      Muhammad Davian I was just playing with the shield I just put together and found that out. you put it in the red peephole

    • @029_muhammaddavianrusdians4
      @029_muhammaddavianrusdians4 7 ปีที่แล้ว +1

      Anonymous Li yea

  • @JangoTheBlueFox
    @JangoTheBlueFox 8 ปีที่แล้ว +1

    the hole in the backpack is for the G-Defenser but it's also compatible with the Build Booster MK-II. same for the RG version, you can use both of those add-ons for both versions of Gundam MK-II.

  • @SpiralOther
    @SpiralOther 8 ปีที่แล้ว +1

    i was hoping for a 180 at the leg but its fine too
    still looks like a good kit that only needs some panel lining and a top coat

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว +1

      Definitely a nice kit just out of box!

    • @dredgewalker
      @dredgewalker 3 ปีที่แล้ว

      What this simply kit lacks is more decals. The flat finish is great and the conservative panel lines in this kit makes me appreciate the design more

  • @hsm6996
    @hsm6996 8 ปีที่แล้ว +1

    The backpack can fit the back pack of build Gundam MKII ??

    • @Arrowdodger
      @Arrowdodger 8 ปีที่แล้ว

      +Rald Pro that's what I've heard, yes, not positive though.

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      Yes, again I'm not positive but I believe it should fit

  • @IchiAriichisanroku
    @IchiAriichisanroku 5 ปีที่แล้ว

    Is the old g-defenser that came with the old version compatible with this?

    • @ZakuAurelius
      @ZakuAurelius  5 ปีที่แล้ว

      I believe so yes. There was a P-Bandai set of that for this if I remember correctly.

    • @IchiAriichisanroku
      @IchiAriichisanroku 5 ปีที่แล้ว

      @@ZakuAurelius would you possibly make a video someone suggests you to?

  • @bobbiemanueldelapena4997
    @bobbiemanueldelapena4997 4 ปีที่แล้ว +1

    will it be compatible with the G-Defenser and become the Super Gundam?

    • @joadarium9605
      @joadarium9605 3 ปีที่แล้ว

      Seen a review of the old HG Super Gundam and the reviewer did tested it on the Revive and to my surprise, it *is* compatible!

  • @BemerLuis
    @BemerLuis 6 ปีที่แล้ว +1

    The shield does collapse, slots into the red piece

  • @ec5328
    @ec5328 6 ปีที่แล้ว +1

    Does the kit comes with a stand?

    • @M1kaelJohansson
      @M1kaelJohansson 4 ปีที่แล้ว

      Nope, the HGs don't as far as I know. The ones he uses in his videos are like $6 though

  • @aliffazfar650
    @aliffazfar650 5 ปีที่แล้ว +1

    This one or the rg for articulation?

  • @juandelata
    @juandelata 4 ปีที่แล้ว +1

    I think you completely missed the collapsible feature of the shield. you're supposed to peg the lower half to the eye slits of the top half

  • @zosahaal103
    @zosahaal103 8 ปีที่แล้ว +1

    I didn't know where to ask, so I write here:
    I have very loose connection between body and waist in real grade rx-178
    Does anyone have same problem? Maybe someone find solution?

    • @MrHalonoob117
      @MrHalonoob117 8 ปีที่แล้ว +2

      Im kinda a scrub when it comes to gundam because i am fairly new so take this with a grain of salt, but in general when it comes to toys/models clear nail polish, or something that is clear and makes layers could help the joint. Again I have no idea if that would work or maybe affect the plastic so if you do use this advice be carful.

    • @TheCrimsonC0met
      @TheCrimsonC0met 8 ปีที่แล้ว +1

      +Halonoob 117 Nail polish has been a very widely used solution to loose pieces among builders so you're doing the right thing lol. I've been doing to WAAAAY off by layering some parts with liquid cement.

  • @vincentdurana9270
    @vincentdurana9270 7 ปีที่แล้ว

    i will buy gundam hg
    but i am confused which one i will buy the gundam x maoh or mk 2 plss help me

    • @krysle3337
      @krysle3337 7 ปีที่แล้ว

      Vincent Durana Mk-II definetly IMO

  • @MaiHobby
    @MaiHobby 7 ปีที่แล้ว +1

    I just cut off the other end of the rifle, makes the mounting point works better

  • @rasheedgregory3459
    @rasheedgregory3459 8 ปีที่แล้ว +1

    I wonder if the HGBF Build MK II backpack and weapons will fit this

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว +1

      +rasheed gregory They will fit this!

  • @lostonessoul8435
    @lostonessoul8435 4 ปีที่แล้ว +1

    My general thoughts on the mk 2....it's a good base for customization.....that really it.

    • @dredgewalker
      @dredgewalker 3 ปีที่แล้ว +1

      The Mk 2 is good gundam design, it's a mass produced gundam that still has great performance. The design also makes it a worthy successor to the rx 78. It's simple with no wasted or over the top unnecessary lines or protrusions

  • @BudiSetiawan-ze8bv
    @BudiSetiawan-ze8bv 8 ปีที่แล้ว

    Let me guess, the next after the MK II u might review the qubeley revive? . something sad about it is the ple use is a P-bandai if i recall not like the old HG

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว +1

      Yeah the Qubeley will be the next Revive kit I review, after the Mk-II Titans version. But it wont be the next review. There will be a few in between

    • @BudiSetiawan-ze8bv
      @BudiSetiawan-ze8bv 8 ปีที่แล้ว

      exited to wait for it :D

  • @the2musketeers650
    @the2musketeers650 6 ปีที่แล้ว

    Should I get this or the Ground Gundam Type-S

    • @celtic6367
      @celtic6367 6 ปีที่แล้ว

      So wich one did you get?

  • @andriannugroho9865
    @andriannugroho9865 7 ปีที่แล้ว

    awesome articulations

  • @thevictoryoverhimself7298
    @thevictoryoverhimself7298 2 ปีที่แล้ว

    Doing my out of box review! (Cuts to assembled kit very clearly inside a box as a backdrop) lol. TH-cam production values joke dont take it seriously :)

  • @fredmanto
    @fredmanto 8 ปีที่แล้ว

    Have you finished the PG Banshee yet? If not I'll have bought it and built it before you have hahaha

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      It's a work in progress! November and December have soooo many kits. So a lot of reviews to do.

    • @fredmanto
      @fredmanto 8 ปีที่แล้ว

      Can you help me out? I'm definitely going to buy the Banshee but I'm not yet set on who from. HLJ is the cheapest but I want to weigh my options since it's such a huge box.

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      +Jordan Cockerham Depends I guess. Where do you live in the world?

    • @fredmanto
      @fredmanto 8 ปีที่แล้ว

      +ZakuAurelius I live in the US, Texas to be exact

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      +Jordan Cockerham Well HLJ is probably going to be the cheapest, but you will have to pay a bit for the shipping. Just compare it with some American-based shops like Gundam Planet or Robot4less. Also try Amazon, they even have sales sometimes.

  • @andewz
    @andewz 8 ปีที่แล้ว

    mine has the same poping off waist as well.
    big contrast from rx78's

  • @lucascahill7434
    @lucascahill7434 6 ปีที่แล้ว

    Should I get this, or the real grade?

    • @ZakuAurelius
      @ZakuAurelius  6 ปีที่แล้ว

      both are pretty great. so just go for whichever fits best for you (or both)

    • @lucascahill7434
      @lucascahill7434 6 ปีที่แล้ว

      Ok thanks

  • @Red-tu4pf
    @Red-tu4pf 8 ปีที่แล้ว

    i found it for 20$ do you think its worth it?

    • @JackEffenBauer
      @JackEffenBauer 8 ปีที่แล้ว

      +The Asian friend I paid the same amount for a Transient gundam, so yeah...But definitely cheaper from Japan if you buy in bulk. If you're just getting one then, yeah it's worth.

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      Depends on where you live. If you're living in the US then I'd guess that's a pretty average price I guess, if that's including shipping.

  • @Masterincommander
    @Masterincommander 8 ปีที่แล้ว

    is there a MG version of this?

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      Yes, the original and a 2.0

  • @ScottyIceSoNice
    @ScottyIceSoNice 8 ปีที่แล้ว

    But here's the trillion-dollar quesiton. How does it work with the HG Flying Armor? Can it store the shield and ride it while lying down?

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      Yes!

    • @ScottyIceSoNice
      @ScottyIceSoNice 8 ปีที่แล้ว

      +ZakuAurelius Radical! You were right about the G-Defenser/Super Gundam thing, by the way. Dalong's got a few pics of it.
      www.dalong.net/review/hg/h193/p/h193_26.jpg

  • @shirothenoodle1810
    @shirothenoodle1810 2 ปีที่แล้ว

    Wait so they did a super gundam?????

  • @vzekiel6711
    @vzekiel6711 3 ปีที่แล้ว

    I want to get this then paint it to RX-78-2 colors

  • @hiruma4142
    @hiruma4142 8 ปีที่แล้ว

    This guy should have the Unicorn-like body joints for the arms.

  • @fantastiCkiLler92
    @fantastiCkiLler92 8 ปีที่แล้ว +1

    I don't like this new proportion, NAOKI just love small feet in MS but I freaking hate them.....Lower legs are way too bulky if you compare to the old HGUC ver and the shoulder are way too small...........I'm gonna stick with the old HGUC MK-II instead of buying this

  • @trauruongvlog1940
    @trauruongvlog1940 2 ปีที่แล้ว

    it so cheap and beautiful , the good for beginner=))

    • @ZakuAurelius
      @ZakuAurelius  2 ปีที่แล้ว +1

      Totally!

    • @trauruongvlog1940
      @trauruongvlog1940 2 ปีที่แล้ว

      @@ZakuAurelius I LIVE IN VIETNAM, I LOVE YOUR RG ZETA REVIEW VIDEO🙃WISH YOUR CHANNEL FOR MORE DEVELOPMENT😊

  • @itsthemightyd2339
    @itsthemightyd2339 8 ปีที่แล้ว

    Are you ever gonna get Shin Musha Gundam? :D

  • @moomanchu608
    @moomanchu608 2 ปีที่แล้ว

    Mine has a shitty waist, torso pops off non stop

    • @ZakuAurelius
      @ZakuAurelius  2 ปีที่แล้ว

      Yeah a lot of these Revives have that issue because they share that similar design feature (such as Ground Gundam, Ground GM, and their variants)

  • @mogumoguokayu1418
    @mogumoguokayu1418 3 ปีที่แล้ว

    damn wrong video I have the rg one and I'm just trying to find some help online

    • @overlimitrpm
      @overlimitrpm 3 ปีที่แล้ว

      I know it is too late but the RG is very good

  • @patrickantonio2454
    @patrickantonio2454 7 ปีที่แล้ว

    1 800 80 degrees hahahahaha

  • @sodapopcustoms834
    @sodapopcustoms834 8 ปีที่แล้ว

    I think his calves are way to big.

  • @EnricoPallazzoooo
    @EnricoPallazzoooo 8 ปีที่แล้ว

    Really disappointed with kit. While the articulation has improved, its not much better than the old HGUC MK II. The HGUC F91 had color-accurate weapons for a lower price, why couldn't they do that at least for the Beam Rifle? Was really looking forward to this release, but I guess the RG is still the best version of the MK II afterall...

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว +1

      Just depends on what you want, eh. RG is definitely more bang for your buck. But if you didn't want to spend as much, this is still a fantastic kit.

    • @EnricoPallazzoooo
      @EnricoPallazzoooo 8 ปีที่แล้ว

      +ZakuAurelius Did you build the old HGUC MK-II? While its definitely showing its age, in terms of seamlines and stuff, its still a good kit that can challenge the new MK-II in some aspects. For example, it has a collapsing shield and can bend the feet downwards. I have two of them, one with the Flying Armor and one with the G-Defensor. If I had the equipment I would like to do a comparison video

    • @ZakuAurelius
      @ZakuAurelius  8 ปีที่แล้ว

      +StrikeFreedomV2 I haven't built the old kit, no. But I see your point. I will be getting the Flying Armor/G-Defenser set and using that for this, so I'll be able to show that in review later anyway.

    • @EnricoPallazzoooo
      @EnricoPallazzoooo 8 ปีที่แล้ว

      +ZakuAurelius Nice, looking forward to seeing your thoughts about it :)