Siemens NX Tutorial | Wrap curve, Swept, Orienting Cross Sections
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- B1P-40-E | Siemens NX 2007 Tutorial Modeling | This last expert course shows further possibilities for creating, controlling and orienting curves in 3D space. A simple compression spring with a rectangular wire cross-section and applied ends serves as an exercise part, because it already shows typical problems that also have to be solved in the modelling of screw conveyors, milling cutters or turbine blades: How can a cross-section be oriented along the guide?
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on TH-cam. (and about your subscription ;-) / @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Content
00:00:10 Foreword
00:00:34 Helixes from wrapped curves
00:03:37 Start course
00:03:39 Expressions
00:06:24 Sketch guide
00:11:10 Wrap curve
00:12:02 Sketch cross section
00:14:18 Another test
00:15:01 The swept command
00:16:04 Trim ends
00:17:34 Conclusion
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse