@demaniage 34.8 inches tall but slightly narrower. For 70 profile tyres, 305 would be the narrowest I would put on a 18×9 for offroading. Keep in mind the wheel offset and that different brands, models, sizes of tyres could be smaller or bigger when compared. The 35×12.50r18 YOKOHAMA GEOLANDAR G017 XD AT is a small tyre for it's stated size, so to be sure you or someone else would have to do research on the specific size(305/70r18), brand, model of tyre and how much will you articulate the suspension, do you have a lift, extended bump stops/pads under the bump stops, if you plan to use tyre chains or studs and if you are willing to make additional room in the fenderwell.
Wreszcie znalazlem kogos kto w Polsce odpicowuje tak pieknie bryki... I od razu pytanie. Czy jest mozliwosc wstawienia FOXa czy innego dobrego amora i sprezyn do Chrysler Pacifica 2021 AWD? Nie musi byc przy tym podwyzszony...
Dzięki za miłe słowa :) A co do Pacifici, to niestety nie. Pacifica to fantastyczne auto, ale daleko jej do terenówki czy SUV'a, a to właśnie nasza wąska specjalność.
It ended up being around 215 cm tall at the highest point, but there is still an option to raise it a bit upfront if you wish. 215 is just a bit over 7ft. The upgrade is worth rebuilding your garage ;)
@@Ric088 On factory wheels, you can expect those tyres to rub. We had rubbing on UCA or knuckles as we had 18x0 ET1 wheels. Plenty of space. Just need to modify the wheel well liner and fender which you can see in our movie.
Likely yes, but to what extent depends on your setup. The fact of the matter is when lifting your truck you are raising the center of gravity as well as changing the steering and driveline angles. Installing a quality suspension lift like the one we offer from BDS helps, work within factory vehicle parameters and offer great on/offroad performance and handling.
Your video popped up in my feed. I enjoyed the new suspension and wheel install. Details were a bonus. I have the 2022 Ram Rebel GT.
Owned a 2019 Rebel loved it!
so what are you driving now? :)
@ Exchanged my Rebel with a TRX sold it now just a normal car, Seriously considering a 25 Rebel GT or RHO.
@@Kliffy77 may i know why you sold the trx ?
@@aenarcos7021 Thirsty for premium fuel, Hard to park it, Got a good deal so i sold it.
The installation was really well done. Nice work on patching up the wheel well. 👍
18×9 +0mm Bronze Method 318 wheels and 35x12.50r18 Yokohama Geolandar G017 XD AT tyres are another option.
What about with 305/70R18 tires?
@demaniage 34.8 inches tall but slightly narrower. For 70 profile tyres, 305 would be the narrowest I would put on a 18×9 for offroading. Keep in mind the wheel offset and that different brands, models, sizes of tyres could be smaller or bigger when compared. The 35×12.50r18 YOKOHAMA GEOLANDAR G017 XD AT is a small tyre for it's stated size, so to be sure you or someone else would have to do research on the specific size(305/70r18), brand, model of tyre and how much will you articulate the suspension, do you have a lift, extended bump stops/pads under the bump stops, if you plan to use tyre chains or studs and if you are willing to make additional room in the fenderwell.
Wreszcie znalazlem kogos kto w Polsce odpicowuje tak pieknie bryki... I od razu pytanie. Czy jest mozliwosc wstawienia FOXa czy innego dobrego amora i sprezyn do Chrysler Pacifica 2021 AWD? Nie musi byc przy tym podwyzszony...
Dzięki za miłe słowa :) A co do Pacifici, to niestety nie. Pacifica to fantastyczne auto, ale daleko jej do terenówki czy SUV'a, a to właśnie nasza wąska specjalność.
So was this the 3.5 inch lift
Best looking Ram Rebel I’ve seen! What’s the name of the wheel model you discarded?
Thank you! The previous wheels were Fuel D696 Covert
Great video. Thanks.
Strange it has a Bighorn bed on a Rebel, must be a UK thing?
The bed has been replaced with a brand new one after a minor crash, that's why.
So is this basically a 2.5 leveling kit? I have a built to serve looking to do the same. Ty in advance!!
😍😍 sweet jesus
Great vid, sweet setup. What’s the overall height, will it fit in my garage? Probably still under 7 feet?
It ended up being around 215 cm tall at the highest point, but there is still an option to raise it a bit upfront if you wish.
215 is just a bit over 7ft.
The upgrade is worth rebuilding your garage ;)
Would this kit fit 18in wheels with a -12 offset?
18x9" ET-12 will fit. The wheels we had put on had 18x9" with -18 offset.
What tire size did you run?
35x12,5" R18
@@offroad_express any rubbing with the 3” UCA’s with those tires?
@@Ric088 On factory wheels, you can expect those tyres to rub. We had rubbing on UCA or knuckles as we had 18x0 ET1 wheels.
Plenty of space. Just need to modify the wheel well liner and fender which you can see in our movie.
i have a question , does this effect on towing capacity ?
Likely yes, but to what extent depends on your setup. The fact of the matter is when lifting your truck you are raising the center of gravity as well as changing the steering and driveline angles. Installing a quality suspension lift like the one we offer from BDS helps, work within factory vehicle parameters and offer great on/offroad performance and handling.
jaki kurwa fajne
🤘
Why the rear shocks went upside down? I have them the other way around with a small hole on the fender to access the knobs
Depending on application Fox Elite 2.5 have different mountings, orientations and reservoirs. This is how Ram 1500 DT is oriented.