Thank you. I had never dealt with removing this type of bulb before, so I wanted to be cautious about taking the old one out. Your video was exactly what I need.
This works for the driver's side bulb. For the passenger side bulb you must first unscrew the washer fluid container (3 bolts) and just push it backwards far enough to access the blinker bulb. Then install new blinker bulb, and then tighten back down washer fluid container. 10mm socket needed. Very simple to do, only took an extra 5 minutes, mostly to find the right socket.😊
I also have a 2013 4Runner with the same problem, except mine is cracked and not with a big hole. It was cracked enough for water to get in and short out the bulb. Replacement lens are surprisingly cheap. I wonder if it would be easier if you remove the tire? Thanks for your video. It will save me a lot of money taking it somewhere to have it done.
Italian Troutaholic If not the same, I would assume very close! Almost all vehicle light bulbs are fairly easy to replace and very similar to this video. 1) Identify & locate the bad light 2) Find the space directly behind the bad light Granted, I’ve heard of some vehicles where you have to remove the entire light assembly to change the light.
Wish all fix was this easy! Thank you!
Watching this video in the parking lot of a Napa right now....thanks!
I’m in an O’Rilley’s parking lot. 😆
To the dude who put this on here: 👍🏽✌🏽
my bulb kept slipping hadn't listened for that second hard click putting the bulb...super helpful!!!
You're a lifesaver bro. I was trying every way in the world to unclip the 2 white pieces. I had no idea how easy it really was. Thank you.
Thank you. I had never dealt with removing this type of bulb before, so I wanted to be cautious about taking the old one out. Your video was exactly what I need.
I am usually hopeless, but I was able to do this myself on my Tundra. Thanks!
I did it , could not have been any easier. Thank you, you are a great instructeor.
Thanks for taking the time to help folks.
Mike
Congrats to everyone who drives a Toyota truck.
This works for the driver's side bulb. For the passenger side bulb you must first unscrew the washer fluid container (3 bolts) and just push it backwards far enough to access the blinker bulb. Then install new blinker bulb, and then tighten back down washer fluid container. 10mm socket needed. Very simple to do, only took an extra 5 minutes, mostly to find the right socket.😊
I also have a 2013 4Runner with the same problem, except mine is cracked and not with a big hole. It was cracked enough for water to get in and short out the bulb. Replacement lens are surprisingly cheap. I wonder if it would be easier if you remove the tire? Thanks for your video. It will save me a lot of money taking it somewhere to have it done.
Thanks for making my day a little easier!
Great info..thx.2012 Tacoma... I ran into a problem getting it seated back into the receptacle holder but I eventually got it..thx again
Thanks bud. Clear concise and to the point
Thanks for posting this, and having clear & focused video!
Thanks Andrew for the step by step instructions.
Great tutorial! Love the system blue tshirt
Great, easy to follow, directions.
amazing stuff, so simple to understand. Thanks for getting your hands dirty for us. Oh wait a minute you had gloves on:)
Thanks, great instructions!
Awesome thanks man! This was my exact issue
I’m glad the video helped!
Same way to do a 2014+ Tundra as well. Thanks for posting!
I’m glad it worked out well!
I replaced mine but it's still blinking fast? Light is on and working. What do you think this might be?
Thank you!
Great tutorial.
Toyota Tundra rules 💪🏼
Good video and easy to follow instructions 👍
Thank you. Made it an easy job.
Thanks for taking the time to do this!
Thanks for the vid!
Thank you for this video!
Thanks for posting this video, very helpful.
is there a video for the 4157 sockets ...my sockets are all melted ...; /
If I would’ve known how easy this was I would’ve done it awhile ago 😅
Thank you for your help!
Thanks you made that super easy.
Thanks I probably would have mess that up some how.
Thanks for your video, very helpful.
Perfect, great tutorial 👌
Thanks so much 😊
Good Stuff, thank you
Thnx man! Appreciate the video!
Thank You!!
Looks like your battery hold down bracket has corroded like mine did.
He nailed it!
Thank you! Helpful
Just changed my bulb #Nomanrequired.
Awesome, Nakita! #MissIndependent
Preciate it!
same as for a tacoma???
Italian Troutaholic If not the same, I would assume very close! Almost all vehicle light bulbs are fairly easy to replace and very similar to this video.
1) Identify & locate the bad light
2) Find the space directly behind the bad light
Granted, I’ve heard of some vehicles where you have to remove the entire light assembly to change the light.
Great thanks man!
Thanks!
Thank you
Thank you.
thank you! ...
Nice video, thanks.
Thanks Charles!
Great, thanks!
Thanks
Audio went out 2 minutes after starting so have no idea what you said
Thanks for making my day a little easier!
Thank you!!
Thanks
Thank you!!