How to make Beautiful Flower Balloon (Cómo hacer un hermoso globo de flores)

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024
  • 👉👉 Please visit our Amazon storefront (we earn commission from your purchases).
    Thanks for the support 👉 www.amazon.com...
    Materials are :
    Balloon glue dots - amzn.to/3lpriit or UGlu dashes - amzn.to/3vU7gAh
    11 or 12 inches red latex balloon (for the petals)
    5 inches latex balloon (center of the flower)
    260 or 260Q balloon (also known as modelling balloon) - from our Ebay store - www.ebay.com/i...
    but you can also get that in Amazon.
    Hope you like it and learn something from it.
    Thanks so much for watching and for all the support.
    Take care and Have a blessed day.
    ***** Please visit our Ebay store - www.ebay.com/m...
    ***** Links for the following just in case you want to buy : (We will earn some commission from your purchase. Thank you).
    Heat Sealer (Balloon sealer) - amzn.to/2X4omQr
    Bobo balloon (18 inches) - amzn.to/3ivUBP1
    Balloon Electric Pump - amzn.to/3sAICEi
    Balloon Manual Pump - amzn.to/3zPNNEg
    Balloon Manual Pump (Qualatex) - amzn.to/3qwcBOZ
    Hi- Shine (to keep the Balloon shiny) - amzn.to/3eCPZWw
    Balloon sizer (Qualatex) - this is the one we use in our vlog - amzn.to/3rnOOhu
    Balloon sizer (no brand) - amzn.to/33ZzuBw
    Silhouette Cameo 4 - amzn.to/3cxcCK9
    Balloon Glue dots - amzn.to/3lpriit
    UGlu dashes - amzn.to/3vU7gAh
    20 lb. Fishing line - amzn.to/3KqR3eL
    Craftables Black Vinyl sheets (we use for our Cameo 4 machine) - amzn.to/336paak
    For Our vlog (what we use) :
    Ring light - amzn.to/2QNL500
    Lighting Kit Professional Studio Photography equipment - amzn.to/2QBG4Yb
    #balloontutorial #diyballoons #balloons #balloonbouquet #birthdayballoonbouquet #balloonflower #lavenderflowers #lavenderblossom #flowers #flowerballoon #balloondesign #balloonideas #balloon_show #balloonstylist #cocomelon #cocomelonbirthday #birthdayballoons #birthdayballoonbouquet #birthdaycelebration #christmas #balloonchristmastree #christmas2022 #valentinesday #valentinesdaygift #bemyvalentine
    Balloon Flower
    Valentines day balloon ideas
    Balloon Christmas tree
    How to make Christmas tree
    DIY Balloon Christmas tree
    Como hacer una flor de globo
    День Святого Валентина
    día de San Valentínflor de globo
    ramo de globos
    tutorial de globos
    Birthday balloon
    Balloon Bouquet
    pared de globos
    balloon wall
    No stand balloon backdrop
    how to make balloon wall
    balloon arch diy
    pared de globos
    balloon backdrop tutorial
    diy balloon garland
    diy balloon backdrop
    balloon garland tutorial
    balloon arch tutorial
    party decor
    balloon decorations
    balloon column
    balloon tutorial
    how to luxury balloon wall
    easy balloon wall tutorial
    balloon wall decoration tutorial
    balloon wall without stand
    balloon wall with backdrop stand
    balloon wall decoration ideas simple
    balloon bouquet ideas
    balloon bouquet pinterest
    balloon bouquet design
    balloon bouquet for birthday
    balloon bouquet manila
    balloon bouquet tutorial
    balloon delivery australia
    balloon arrangement delivery
    order a balloon bouquet
    make a balloon bouquet
    how to make a balloon bouquet without helium
    hot air balloon bouquet
    balloon bouquet box
    balloon bouquet birthday
    balloon bouquet business
    balloon bouquet baby shower
    balloon bouquet cost
    balloon bouquet classes
    balloon bouquet clipart
    balloon bouquet diy
    balloon bouquet dollar tree
    balloon bouquet etsy
    balloon bouquet events
    balloon bouquet emoji
    balloon bouquet ebay
    balloon bouquet erie pa
    balloon bouquet flower
    balloon bouquet flowers
    balloon bouquet graduation
    balloon bouquet glasgow
    balloon bouquet geelong
    balloon bouquet gif
    balloon bouquet galway
    balloon bouquet houston
    balloon bouquet how to make
    balloon bouquet holder
    balloon bouquet helium
    balloon bouquet inflated
    balloon bouquet images
    balloon bouquet jaipur
    balloon bouquet jumbo
    balloon bouquet kit
    Balloon tutorial

ความคิดเห็น • 120

  • @natashaj4078
    @natashaj4078 ปีที่แล้ว +2

    I watched this ENTIRE video with my mouth hanging open... This was AMAZING.. so creative... Thank you for sharing!

    • @fambamny
      @fambamny  ปีที่แล้ว

      Wow, thank you so much Natasha. We really appreciate your support and you're welcome.

  • @mlearmont
    @mlearmont ปีที่แล้ว +8

    You make it look so simple and I'm green with envy, and I love this tutorial 😊 Every single time I try to attempt these beautiful flowers I fail miserably. It's when I release the air from the 12" the 260q bends inside and then it looks like deformed shape😣Help!!!!

    • @fambamny
      @fambamny  ปีที่แล้ว +10

      Hello mlearmont, the trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.

    • @myrawilson8337
      @myrawilson8337 ปีที่แล้ว

      Oh my goodness same here

    • @IllHandleThis
      @IllHandleThis 5 หลายเดือนก่อน

      @@fambamnyYou’re so sweet to type all that to try and help people. What a gem you are. ♥️

    • @fambamny
      @fambamny  5 หลายเดือนก่อน

      @@IllHandleThis thanks so much, we are also grateful to you all for the support. It means a lot. Have a great Sunday.

    • @araceliserrano4119
      @araceliserrano4119 หลายเดือนก่อน

      Same 😂 I can’t get the flower to keep the shape once the air is out.. it closes in

  • @carmenineztorres4779
    @carmenineztorres4779 ปีที่แล้ว

    Beautiful! Thank you 🌺

    • @fambamny
      @fambamny  ปีที่แล้ว +1

      You're welcome Carmen and Thanks so much also for watching and for the support.

  • @NP-tf8nd
    @NP-tf8nd ปีที่แล้ว

    ❤❤❤❤❤❤❤ beautiful ❤️❤️❤️

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thank you so much.

  • @jeromelasco2334
    @jeromelasco2334 ปีที่แล้ว

    Wow very nice tutorial I got it. Thank you.

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thank you also for watching Jerome.

  • @ChosenbyGod_1
    @ChosenbyGod_1 2 หลายเดือนก่อน

    Beautiful ❤❤❤❤

    • @fambamny
      @fambamny  2 หลายเดือนก่อน

      Thank you! 😊

  • @sirichandu
    @sirichandu ปีที่แล้ว

    Wooow really superb 👍

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thank you so much

  • @shirls02f52
    @shirls02f52 ปีที่แล้ว

    Looks good

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thanks so much Shirls

  • @thebeautiesfamily
    @thebeautiesfamily ปีที่แล้ว

    Omg so good 👍 😍 🙌

    • @fambamny
      @fambamny  ปีที่แล้ว

      HelloThe Beauties Family, Thank you so much.

  • @xxbaileyxx6683
    @xxbaileyxx6683 ปีที่แล้ว

    My balloons keep going elongated rather than rounded when the 260 is inside. Do you know how I would stop this? loving the videos, they're great

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello, Thank you. Please make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.

  • @marisolespinal9001
    @marisolespinal9001 ปีที่แล้ว

    Preciosa bendiciones 🙏👍❤️

    • @fambamny
      @fambamny  ปีที่แล้ว

      Muchas Gracias Marisol.

  • @carmendiaz_25
    @carmendiaz_25 8 หลายเดือนก่อน

    Lo hace ver tan fácil wow yo quiero aprender, no tienen cursos?

    • @fambamny
      @fambamny  8 หลายเดือนก่อน

      Muchas gracias carmen. Lo siento pero no ofrezco ninguna clase. Todo estará aquí en TH-cam. Gracias.

  • @nubiaoliveira2413
    @nubiaoliveira2413 ปีที่แล้ว

    Lindo demais amei 🤩🤗🤗😊

    • @fambamny
      @fambamny  ปีที่แล้ว

      Muchas Gracias

  • @rosagodina3000
    @rosagodina3000 ปีที่แล้ว

    Thank you hermosa flor

    • @fambamny
      @fambamny  ปีที่แล้ว

      You're welcome Rosa and thank you also.

  • @mamedova9812
    @mamedova9812 7 หลายเดือนก่อน

    А 260 шар хром нужен? 😊

    • @fambamny
      @fambamny  7 หลายเดือนก่อน

      Здравствуйте, да, нам нужен латексный шар 260 или 260Q для внутренней части лепестка, но он не обязательно должен быть хромированным, подойдет любой цвет. Спасибо.

  • @LM-gs7sr
    @LM-gs7sr ปีที่แล้ว

    Thank you 🥰

    • @fambamny
      @fambamny  ปีที่แล้ว

      You’re welcome L M and Thanks so much also for watching.

  • @readwithme933
    @readwithme933 ปีที่แล้ว +12

    Your tutorials are spot on but I just find these so challenging 😅 I’ll get there one day haha

    • @fambamny
      @fambamny  ปีที่แล้ว +5

      Hello Sharnah, just keep on trying, I know you can do it. It took me a long time to learn this petals as well. Thanks so much.

  • @portanciomascarenhas51
    @portanciomascarenhas51 ปีที่แล้ว

    What size balloons you can use and can I use local balloons to make flowers?

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Portancio, we use sizes 11 or 12 inches for the flowers. You can try the local balloons since we also use balloons from Amazon, but mainly esp. if it's for the clients we will use Qualatex or Kalisan since they are great quality balloons. Thank you.

  • @brindashah2835
    @brindashah2835 ปีที่แล้ว

    Can u pls share how to do bobo balloon...with teddy...pls teach 🙏

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Brinda. Do you want the Bobo balloon with teddy bear inside? I think we have one tutorial before (more than a year ago.). Thank you.

  • @rosangelalino7275
    @rosangelalino7275 10 หลายเดือนก่อน

    Maravilha❤👏👏

    • @fambamny
      @fambamny  10 หลายเดือนก่อน

      Obrigado Rosângela

    • @jeanemaytugap6833
      @jeanemaytugap6833 10 หลายเดือนก่อน

      bvvj7jhh777jjkjj
      99
      (((⁹99!;

  • @BalloonWorldTampico
    @BalloonWorldTampico 4 หลายเดือนก่อน

    cuando intento hacer el pétalo de mi flor el globo 260 se deforma, lo intento con los de la marca sempertex pero viene con marcas de doblez y al momento de sacar el aire del globo de 12" justo el globo 260 se deforma de donde tiene las marcas de dobles, como se pueden quitar??????? ayudaaaaaaaaa :(

    • @fambamny
      @fambamny  4 หลายเดือนก่อน

      Hola, asegúrate de que tu globo 260 esté bien apretado o no demasiado blando. Como sabes, doblas tu 260 y luego lo introduces en el globo de 11 pulgadas. Luego inflarás tu globo de 11 pulgadas. Pellizca la punta y luego bombearás tu 260 hasta que veas que ambos extremos de tu 260 sobresalen en la entrada de tu globo de 11 pulgadas. Ahora tienes que asegurarte de que no salga aire de tu 260. Normalmente lo envuelvo alrededor de mi dedo puntiagudo y mientras hago esto voy a tirar de la cola de mi 260 hasta que resista, de esa manera no será demasiado. suave. Recuerde que si su 260 es demasiado blando, puede deformarse fácilmente. Espero que esto ayude. Gracias y que tenga un buen día.

  • @marisolespinal9001
    @marisolespinal9001 5 หลายเดือนก่อน

    ❤❤❤

    • @fambamny
      @fambamny  5 หลายเดือนก่อน

      Thanks so much :)

  • @DianeCraig-h5b
    @DianeCraig-h5b ปีที่แล้ว

    mine keep collapsing what am I doing wrong?

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Diane, Pls. make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video.

    • @christinamartinez6361
      @christinamartinez6361 5 หลายเดือนก่อน

      Same mine, keep making this weird shape and will not keep the shape of the petal in going to try his method then give up and move on

  • @daArt708
    @daArt708 ปีที่แล้ว

    My balloons folds on the sides...what am I doing wrong😢

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Dee, I will let Cheland know about your question and he will get back to you soon. Thank you - this is Aileen

    • @fambamny
      @fambamny  ปีที่แล้ว +1

      Hello Dee, please make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day.

    • @daArt708
      @daArt708 ปีที่แล้ว

      @@fambamny thankyou so very much...I did a small one it was cute ...so on to a bigger one.🤗

    • @fambamny
      @fambamny  ปีที่แล้ว

      @@daArt708 that's great.. go for it 👍

  • @marygill6993
    @marygill6993 10 หลายเดือนก่อน

    😢😢😢😢 wish I could upload my picture cause my flower is not working

    • @fambamny
      @fambamny  10 หลายเดือนก่อน

      Hello Mary, please try this, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q/260 until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.

    • @alomo3
      @alomo3 8 หลายเดือนก่อน +1

      Same here, I literally gave up but with more practice, I got it, not perfect yet but better than before, Still practicing. Don’t give up practice practice practice.

  • @denisemanriquez8778
    @denisemanriquez8778 ปีที่แล้ว

    I cant😢😂

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Gracie, pls. let us know if you have question. Hopefully we can help you with your balloon project. Thank you.

  • @lyndseystephens8421
    @lyndseystephens8421 ปีที่แล้ว +2

    Great tutorial... but how do you get the petals so round and bent up? Mine just go a funny shape no matter what I do 🙄

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Lyndsey, make sure that the latex balloon is not too big upon inflating it. Just pump the 260 balloon until you see it protrude to the nozzle of the latex balloon, in that way you know it's tight. Because if the 260 balloon is too soft it will bend. Hope that can help. Thank you.

    • @lyndseystephens8421
      @lyndseystephens8421 ปีที่แล้ว

      @@fambamny thank you for the advice. I've just spent another 3 hours trying but I will.keep practicing! 😄

    • @janeozerov9337
      @janeozerov9337 ปีที่แล้ว

      Saaammme

    • @janeozerov9337
      @janeozerov9337 ปีที่แล้ว

      Any tips for inflating balloons inside? Mine have weird shape

    • @fambamny
      @fambamny  ปีที่แล้ว +2

      @@janeozerov9337 Please make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you so much for watching our video(s).

  • @araceliserrano4119
    @araceliserrano4119 หลายเดือนก่อน

    I can’t get the shape of the pedal to stay round it gets skinny and loses the shape

    • @fambamny
      @fambamny  หลายเดือนก่อน

      Hello Araceli, the trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.

  • @kiribrown293
    @kiribrown293 ปีที่แล้ว +1

    Amazing tutorial once again!!! Thank you for these constant videos 🎉

    • @fambamny
      @fambamny  ปีที่แล้ว

      You are so welcome Kiri and Thank you so much also for the support. It means a lot.

  • @elizabethquinn4903
    @elizabethquinn4903 ปีที่แล้ว +1

    I love the tutorial they are awesome however I can not get those beads they always come loose

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Elizabeth, this is Aileen and I will let Cheland know about your beads issue later when he gets home. We will let you know soon. Thanks so much.

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Elizabeth, this is Cheland. Never let go of the very first bead, hold on to that while twisting more beads. Thank you.

  • @GabrielaCVazquez
    @GabrielaCVazquez 6 หลายเดือนก่อน

    Hermosa! Que marca de globo es?

    • @fambamny
      @fambamny  6 หลายเดือนก่อน

      Hola Gabriela, creo que fue Qualatex. Gracias.

  • @jdr03272
    @jdr03272 3 หลายเดือนก่อน

    @fambam NY
    Can you make any recommendations for people struggling to do this?
    Specifically which 11-in round are you using? Qualatex? I'm testing the technique using qualatex organge 11" rounds and qualatex yellow 260q's and having a real bear of a time. Paying attention now to tighten the 260q against the nozzle of the 11", tried pushing the knot of the 260q so it is offset from the nozzle of the 11-in round by varying distances all the way up to perpendicularity. Can't seem to get it right, get any consistency.
    It looks like the qualatex 11 in round has more of a tapered neck leading to the nozzle than the balloon in your video and I wonder if that's causing compression of the petal and distorting the shape?
    I'm doing a giant balloon tree for my kids birthday party on Saturday and I'm hoping to embellish with some of these flowers but not having any luck.

    • @fambamny
      @fambamny  3 หลายเดือนก่อน

      Hello jdr03272, pls. make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help. Thank you so much for watching our video.

    • @jdr03272
      @jdr03272 3 หลายเดือนก่อน

      @@fambamny I will try tomorrow!

    • @jdr03272
      @jdr03272 2 หลายเดือนก่อน

      @@fambamny so I ended up using a 360Q instead and the bigger balloon works better to keep a tight fit to form the pedals. It takes a lot more force to crease. The flower ended up being enormous but it looked beautiful. I still really want to get this right with 260 Q's. I'll keep trying.

  • @johannajeffel8310
    @johannajeffel8310 5 หลายเดือนก่อน

    Mines come out to a weird shape 😢 why is this

    • @fambamny
      @fambamny  5 หลายเดือนก่อน +1

      Hello Johanna, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help. Thank you so much for watching our video.
      Reply

  • @myrawilson8337
    @myrawilson8337 ปีที่แล้ว

    Helppppppppppppppp

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Myra. Please feel free to ask question and we will try to help you or answer your question the best as we can.

  • @DianeCraig-h5b
    @DianeCraig-h5b ปีที่แล้ว

    I can't figure out what I'm doing wrong. My pedals all collapse! what am I doing wrong?

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Diane, please make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Thank you and have a nice day.

  • @Joycelyn-x2v
    @Joycelyn-x2v ปีที่แล้ว

    Hi , after a few hours my petals start looking like they are inflated and lose the shape that I had originally made , I’m not sure what I’m doing wrong , or are they not meant to last

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Joycelyn, usually it will swell up the next day (it will deform) but not few for hours.
      I honestly don't know the reason why it will deform only for hours since it never happened to us. Sorry I can't give you any tips about the issue but once I found out one, I will let you know. Thank you.

  • @marlenebaker1233
    @marlenebaker1233 ปีที่แล้ว

    After you cut the other end of the 260 to you still hold on to the other end of the 270 while you are pressing down to release the air?

    • @fambamny
      @fambamny  ปีที่แล้ว +1

      Hello @marlenebaker1233, so sorry for the late reply. About your question the answer is no. You don't have to hold it, remember I tied it 3 times then cut the extra. Once you cut it, you can now let go and pump air to your latex balloon. Please let us know if you have any question. Thank you so much for watching our channel. Have a wonderful day.

  • @Marzukibk
    @Marzukibk ปีที่แล้ว

    I tried this but my 260 keeps on folding inside once I deflate the 12" balloon

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Marzuki, The trick is, make sure your 260Q balloon is nice and tight or not too soft. As you know, you fold your 260Q then feed it into the 11 inches Balloon. You will then inflate your 11 inches balloon. Pinch the tip and then you will pump your 260Q until you’ll see that both ends of your 260Q protrude at the entrance of your 11 inches balloon. Now you have to make sure air won’t come out on your 260Q. I usually wrapped it around my pointy finger and while doing this I will pull the tail end of my 260Q until it resists, in that way it won’t be too soft. Remember if your 260Q is too soft it can easily get deformed. I hope this will help you. Please try it again and don’t give up. Once you figure this out it’ll be easy for you. I know you can do this. Have fun and please let me know if you have any question. Thank you so much for watching our video and have a nice day.

  • @julielegaspina2324
    @julielegaspina2324 ปีที่แล้ว

    Hi I can’t clearly hear the name of the balloon other than latex that you used for the flower balloon.thanks

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello julie, it is called 260 or 260Q or modeling balloon (same balloon just different name, but the most common is 260Q). Thank you.

  • @shivraniedookhie4229
    @shivraniedookhie4229 ปีที่แล้ว

    It’s beautiful. You are the best teacher. Thank you.

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thank you so much Shivranie. It means a lot :)

  • @nicolegonzalez3781
    @nicolegonzalez3781 ปีที่แล้ว

    Hermosos queriendo hacer para el cumple de mi hija pero creo que paso 😢 hermoso un arte 👏

    • @fambamny
      @fambamny  ปีที่แล้ว +1

      Hola Nicole, muchas gracias. Por favor, sigue intentándolo. Ojalá puedas hacerlo algún día. Si tiene alguna pregunta, háganoslo saber y esperamos poder ayudarlo. Gracias.

  • @alisondeguzman8570
    @alisondeguzman8570 ปีที่แล้ว

    Hi. Which balloon inflator is the best for buss?

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Alison, what do you mean by buss? Please let us know. Thank you.

  • @mariaisabellecolin7816
    @mariaisabellecolin7816 ปีที่แล้ว

    So pretty! What brand is the red balloons?

    • @fambamny
      @fambamny  ปีที่แล้ว +1

      Hello Maria Isabelle, I think we use Qualatex in this one. Thanks so much.

  • @michellecreative701
    @michellecreative701 ปีที่แล้ว

    Your tutorial is much easier to follow

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thank you so much Michelle. We really appreciate it.

  • @jurineadunklin8576
    @jurineadunklin8576 ปีที่แล้ว

    Do you guys give classes

    • @fambamny
      @fambamny  ปีที่แล้ว

      Hello Jurinea , sorry but no. We just all do it here in TH-cam. Thank you.

  • @hanybunnyfhoonieys2056
    @hanybunnyfhoonieys2056 ปีที่แล้ว

    So its wont have stick . ?

    • @fambamny
      @fambamny  ปีที่แล้ว

      There's no stick for this Balloon flower. This will be a great addition for some balloon garland or balloon bouquet. Thank you.

  • @cleidearruda4591
    @cleidearruda4591 ปีที่แล้ว

    Thank you, Sir !

    • @fambamny
      @fambamny  ปีที่แล้ว

      You are welcome Cleide

  • @sylviaecklund8766
    @sylviaecklund8766 หลายเดือนก่อน

    Very nice!

    • @fambamny
      @fambamny  หลายเดือนก่อน

      Thanks Sylvia

  • @maichau55
    @maichau55 ปีที่แล้ว

    😍🥰💝

    • @fambamny
      @fambamny  ปีที่แล้ว

      Thank you mai chau.

  • @patriciahernandezreyes9607
    @patriciahernandezreyes9607 ปีที่แล้ว

    Te quedan perfectos los pétalos 🎈🙏

    • @fambamny
      @fambamny  ปีที่แล้ว

      Muchas Gracias Patricia.