My g6 isn’t clicking but is blowing warm on the drivers side and cold on the passenger side. Do you think fixing this blend door actuator will help? There is no freon leak and the compressor seems ok (i was told). Thank you
I unplugged the blend door actuator, the same one you changed in the video and the car is still making the sound. It’s when switching between air intake and recirculate. So how do I get to and replace the recirculation actuator?
I'll give this a shot. My A/C drain backed up and something let out the magic smoke. The blower still works fine, but now I can't switch between hot and cold, or floor and chest.
I couldn't tell if that was remove from the right side of the passenger area, or the left side of the passenger side. I know there's two, and replaced the one on left side (by radio) of passenger side and it still does it. Was told it might be the one on far right side.
The one I replaced is on the right side. It controls the recirculating air. Simple test i did was to turn recirculating on clicking was heard, turned it off clicking went away.
Was it making the noise with the speed at off/zero? My car does the same noise but the ac/heater speed control is on the off/zero location. Thanks in advance for response.
My daughter had 09 pontiac g6 gt 3.5l, her front vents won't blow out, only top dash and floor come out cold... Nothing come out front vents... Is this the part that need to be replace? Please let me know... It is very hot for her in her car with her baby... Pls help, thanks
Orio, first of all, thank you for taking the time to share this. Did you have to do any calibration after the installation of the replacement part? If so, what were the steps? Thanks again.
You order the one for the a/c system that you have in your car. If you have an auto ac system use that if you have the manual system you use that. It's actually probably the same motor for both systems though, but you order the one based on the car you have.
Changed mine and it worked for about 45 min. Then started back again. This time doing it with recirculating air and the air from outside. It was just doing it with the air outside. HELP!!
Agreed. He refers to the wrong actuator, and he gives no verbal instructions. He neither shows or indicates what direction he's working. Up or down(?), left or right(?), he doesn't give any clue! It's like we're floating weightless in outer space, or scuba diving in the dark deep. Thanks for the effort, but your tutorial is both uninformative and mis-informative, esse....
Hello, I am writing this with a language translator. I have a problem with my car, the problem is that the air conditioning is only expelled by the heating vent (only in the front part) , do you think that if I replace the actuator it will work correctly? Thanks for the video, greetings from Mexico
When you make a video with the intention of helping others diagnose a problem it would be extremely helpful to be able to actually see what you are doing. LET THERE BE LIGHT!!! And a steady camera would be nice too.
Thanks for this. Just replaced mine after following your video. It was a pain to reach but worth it to avoid mechanic fees.
Thank you.It was a little confusing...but watching it closely i was able to locate.And all vents are working now😊
My g6 isn’t clicking but is blowing warm on the drivers side and cold on the passenger side. Do you think fixing this blend door actuator will help? There is no freon leak and the compressor seems ok (i was told). Thank you
I have a Pontiac g6 3.5l "06. No heat, no knocking, levels good, no overheating, cold air at any time. Suggestions on what needs to be done?
Thank you for sharing! My car is clicking like that so we are going to follow your video.
Dude how do you get your hands I there ?? I can't get my ratchet to fit
I unplugged the blend door actuator, the same one you changed in the video and the car is still making the sound. It’s when switching between air intake and recirculate. So how do I get to and replace the recirculation actuator?
So this actuator is under the glove box beneath that black cover and on its back? I get dizzy trying to orient myself to how the car is.
Thanks for posting video my moms Pontiac g6 just started doing that sound, really helped out 👍
Thank you so much this video taught me how to do this by myself
I'll give this a shot. My A/C drain backed up and something let out the magic smoke. The blower still works fine, but now I can't switch between hot and cold, or floor and chest.
I’m having the same problem, did you get it fixed?
@@josevillegas9046 No, but it seems to be working again. Strange.
I couldn't tell if that was remove from the right side of the passenger area, or the left side of the passenger side.
I know there's two, and replaced the one on left side (by radio) of passenger side and it still does it. Was told it might be the one on far right side.
The one I replaced is on the right side. It controls the recirculating air. Simple test i did was to turn recirculating on clicking was heard, turned it off clicking went away.
Was it making the noise with the speed at off/zero? My car does the same noise but the ac/heater speed control is on the off/zero location.
Thanks in advance for response.
Silverback Aestheticz it made the noise only when it was on .
Warning...the noise in this video will drive you insane. Do appreciate the info transfer though.
My daughter had 09 pontiac g6 gt 3.5l, her front vents won't blow out, only top dash and floor come out cold... Nothing come out front vents... Is this the part that need to be replace? Please let me know... It is very hot for her in her car with her baby... Pls help, thanks
Did u find what it was mine doing the same thing
Orio, first of all, thank you for taking the time to share this. Did you have to do any calibration after the installation of the replacement part? If so, what were the steps? Thanks again.
Nate 5cents
No calibration required
Did you replace with an manual or automatic door blend actuator
You order the one for the a/c system that you have in your car. If you have an auto ac system use that if you have the manual system you use that. It's actually probably the same motor for both systems though, but you order the one based on the car you have.
@@blk95gsrt Thank you!
The details matter, you did not replace an "ac blend door". You replaced an ac blend door actuator. Two different things.
I hope this work my mechanic put my on heat and now that it’s hot outside he won’t change it back
Thank you for the video.
I cant see a damn thing he's doing and I need this mine has went out as well
Great video! Just a quick question though. How many screws did you have to take off?
Alan Ronquillo 8 screws
Phone is all over the place and it’s hard to tell what you are actually doing, taking off
Changed mine and it worked for about 45 min. Then started back again. This time doing it with recirculating air and the air from outside. It was just doing it with the air outside. HELP!!
It also has no heat! Just air conditioning.
Ask it a question.
thank you for the video my friend
I heard that right 7/32 ?
Correct
@@orio4711 thanks bud
I have to change mine i want to bring down the right tool i live in a apartment building dont want to run upstairs of its the wrong size
Thanks I'll like and subscribe
What were the tools you used
THE MAN PLAYS. 7/32 socket and. A screwdriver
Cambie uno y sigue igual/ ahora are ese otro aver que pasa
Thank you
were u getting cold air
Justin Gauger
yes
thats not a blend door you're replacing. Thats a blend door actuator.
No...It's the recirculate air door actuator.
No it's the actuating door blender control modulator
This is not the blend door
ended up being my ETC sensor
i have no clue what this guy doing, i cant see shit
Agreed. He refers to the wrong actuator, and he gives no verbal instructions. He neither shows or indicates what direction he's working. Up or down(?), left or right(?), he doesn't give any clue! It's like we're floating weightless in outer space, or scuba diving in the dark deep. Thanks for the effort, but your tutorial is both uninformative and mis-informative, esse....
Hello, I am writing this with a language translator.
I have a problem with my car, the problem is that the air conditioning is only expelled by the heating vent (only in the front part)
, do you think that if I replace the actuator it will work correctly?
Thanks for the video, greetings from Mexico
Might be your hvac actuator or door blend actuator.
This is a recirculating door. Not blend door.
When you make a video with the intention of helping others diagnose a problem it would be extremely helpful to be able to actually see what you are doing. LET THERE BE LIGHT!!! And a steady camera would be nice too.
after four min of this video im completely lost not a good vid
The worst possible video you could have done lmfao 🤣🤣🤣