Good stuff there David. Trying to get my answers out berfore you did was not easy. However I was surprised how many I knew. Thanks again for putting in the time
I just did this exam with Ableskills BE VERY CAREFUL IF YOU USE ABLE SKILLS the preparation and exam are horrendous. AND I PASED IT! I asked for permission to switch off and then told “you didnt ask youve just failed” i walked away thinking “i failed” and then realised “but i asked?” So challenged the assesor, i was then told, oh yes you did didnt you. I was allowed to continue but it took me 15 minutes to regain my composure. I started making errors, and when i had finished assesor said I had only just managed to get through it as lots of minor errors. Whose fault was that then? there you tube videos do not have comments disabled for no reason. This was last week of 4 weeks training several others quit before 4th week as couldnt handle the stress.
Great Video for Fundamental/ initial verification, I am doing the EAL version of this which is the equivalent to C&G 2392-10. Thank you, Ninja, for this post.
thanks for this video also would you be able to do a video on 2391-52 written exam and some example question? i really cannot find any examples of these !
hi there could you please answer this question if you dont mind for a single -phase instullation the test for PFC is carried out between A. line and earth and neutral and earth B line and earth and line and neutral c neutral and earth and line and neutral D line and neutral only . which one is correct ?
Sorry sparky ninja, but I think maybe q.10 would be in the scenario of an EICR - as the installation shouldn't be energised causing the pump to be overloaded in the first place.
Brilliant video ninja. Keep up the good work and clearly concise information. Is it possible for you to tell us what tester I could get for long term use please?
Hi Ninja. I'm a 2365 Level 3 student struggling with the science bit of the course. Is there any chance you can do a few videos showing the inductive reactance, impedance, triangles please?? Cheers!!
Sure, I'll try to get some together when I can, in the mean time there are some videos of TH-cam that will have info on this if you search for it. I know that Joe Robinson has starting uploading content in this area so he may be able to engage with you more readily on this.
Quality video! Really useful as there's only a couple of mocks on Smart Screen so seeing some different questions is really helpful. Do you know of anywhere else they can be accessed? Thanks again Mr Ninja!
jsut looked in sart screen as i'm about to do my exam, could only find 2 sets of 15 questions on there, not even a selection big enough for a full exham...
Any possibility, for you Sparky Ninja to do a video on axillary control breakers and the design of there circuits; including the use of BMS and PLC combined with the circuit's design?
They will only provide you with Ze, as the PFC relies on the presence of all parallel paths within the installation; and must therefore be measured at the consumer side.
@@NebakinezaOG see 313.1 pg 49 of the regs or pg 19 of GN3. The DNO will provide the PFC. These will be max values, a more accurate figure can be measured.
I don't understand question 1. Lets say I have just completed a rewire, are we saying that I have to go home and complete the paperwork before I can go back and turn all the power on for the customer? That question would definitely catch me out as not how it works in the real world or have I completely misunderstood?
Thanks for the Upload 👍🏽 By any chance would you happen to know why EAL doesn’t allow for OSG and only GN3 for the multiple choice... As it seems some of the questions in your paper would need referring to the OSG ..? Thanks Again
Any chance of getting some EAL example papers? On our course we just did all C&G mock questions but turns out our papers are all EAL and they only allow GN3
Q41 is C 0.45 need to time the tabulated figure by 0.8 for correction
C is 0.35....answer B is 0.45
I passed today. Thank you for posting this. Very helpful 🙏🏻
What were the questions like dude?
Yeah any Recommendations, gonna be doing my soon?
Question 41 is C. Maximum tabulated values from from 7671 need to be multiplied by 0.8, on site guide values don't.
Good stuff there David. Trying to get my answers out berfore you did was not easy.
However I was surprised how many I knew.
Thanks again for putting in the time
I just did this exam with Ableskills BE VERY CAREFUL IF YOU USE ABLE SKILLS the preparation and exam are horrendous. AND I PASED IT! I asked for permission to switch off and then told “you didnt ask youve just failed” i walked away thinking “i failed” and then realised “but i asked?” So challenged the assesor, i was then told, oh yes you did didnt you. I was allowed to continue but it took me 15 minutes to regain my composure. I started making errors, and when i had finished assesor said I had only just managed to get through it as lots of minor errors. Whose fault was that then? there you tube videos do not have comments disabled for no reason. This was last week of 4 weeks training several others quit before 4th week as couldnt handle the stress.
Great but Q43 was jumped. Why?
great video, really helps with how you read the question into sections . thank you
isnt the answer to question 47 c
Great Video for Fundamental/ initial verification, I am doing the EAL version of this which is the equivalent to C&G 2392-10. Thank you, Ninja, for this post.
thanks for this video also would you be able to do a video on 2391-52 written exam and some example question?
i really cannot find any examples of these !
you skipped question 43
Can we have a video specifically on calculations
hi there could you please answer this question if you dont mind
for a single -phase instullation the test for PFC is carried out between
A. line and earth and neutral and earth
B line and earth and line and neutral
c neutral and earth and line and neutral
D line and neutral only .
which one is correct ?
Sorry sparky ninja, but I think maybe q.10 would be in the scenario of an EICR - as the installation shouldn't be energised causing the pump to be overloaded in the first place.
Could you please share answers for all the question in your drop box.
My tutor today said, the answer to Q5 is - d. HSE Guidence note GS 38. Although he did also say he didn't think it was right personally.
Yeah that's wrong. GS38 is related to the selection of test instruments.
Guidance Note 3 tells us how to do initial verifications (badly).
@@SparkyNinja I have my exam tomorrow , this could be the question that will stop me getting 100% pass mark 😉
@@kathrinebennett4095 let me know how it goes 🤞
Hiya , I passed my exam 🤪 Luckily the question didn't come up. Thanks for these uploads. I will for sure recommend 👌
Brilliant video ninja. Keep up the good work and clearly concise information.
Is it possible for you to tell us what tester I could get for long term use please?
Passed today top marks 🤙🙏
Any suggestions as I got my soon, I brought the Guidance note 3 and the osg
Thanks for your video. enjoyed them all so far.
Hi Ninja.
I'm a 2365 Level 3 student struggling with the science bit of the course. Is there any chance you can do a few videos showing the inductive reactance, impedance, triangles please??
Cheers!!
Sure, I'll try to get some together when I can, in the mean time there are some videos of TH-cam that will have info on this if you search for it. I know that Joe Robinson has starting uploading content in this area so he may be able to engage with you more readily on this.
@@SparkyNinja Cheers mate!
I'll check out Joe Robinson.
Quality video! Really useful as there's only a couple of mocks on Smart Screen so seeing some different questions is really helpful. Do you know of anywhere else they can be accessed?
Thanks again Mr Ninja!
jsut looked in sart screen as i'm about to do my exam, could only find 2 sets of 15 questions on there, not even a selection big enough for a full exham...
Any possibility, for you Sparky Ninja to do a video on axillary control breakers and the design of there circuits; including the use of BMS and PLC combined with the circuit's design?
I will start drafting something together.
could you please put more mock questions ?
what happened to Q43? and im sure the DNO will provide you with the value of the PFC, if you ask nicely ;)
They will only provide you with Ze, as the PFC relies on the presence of all parallel paths within the installation; and must therefore be measured at the consumer side.
@@NebakinezaOG see 313.1 pg 49 of the regs or pg 19 of GN3. The DNO will provide the PFC. These will be max values, a more accurate figure can be measured.
I don't understand question 1. Lets say I have just completed a rewire, are we saying that I have to go home and complete the paperwork before I can go back and turn all the power on for the customer? That question would definitely catch me out as not how it works in the real world or have I completely misunderstood?
Thanks for the Upload 👍🏽
By any chance would you happen to know why EAL doesn’t allow for OSG and only GN3 for the multiple choice...
As it seems some of the questions in your paper would need referring to the OSG ..?
Thanks Again
Is the answer to Q43 C?
Can you do the 8202 written exam please
Hi... thank you so much for such a useful tutorial... is there any chance we can have the answer for Q 43, as I think it is missed... regards
The answer to 43. is C
Any chance of getting some EAL example papers? On our course we just did all C&G mock questions but turns out our papers are all EAL and they only allow GN3
What exactly is the difference between 2392 and 2391 initial?
Thank you so much.
question 41 isnt it 1.85ohms*0.8-1.03 you forgot the correction factor
No, the question states the tabulated value. It is the way it is worded, they are sneaky!!
@@EveryoneLovesPeacocks you are wrong. A tabulated value needs a correction value. Even spaky ninja confirms this in question 44
would this be the same as the 2357-107 exam?
HOW ABOUT QUESTION 43
Hi Sparky ninja can you help us with 2391 52 with any video we can watch or any advice for the exam?
This will be very helpful 🙏
Sure. I've got some videos on the training outcomes and I have an exam simulator you can try.
Hi. Please can you explain how many testing sequence for the three phase?
10 from memory .
Hi, unfortunately I can not download the paperwork, the link does not work, can you help me?
What’s the answer to 43
Had my exam and few of these questions came up
missed number 43
Just passed this exam it was hard I just passed by 2 marks
You missed question 43 ninja