@m2cracing168
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- Ok guys here it is the all NEW rear chassis support or stiffener whatever you wanna call it.... no more bending the rear of the ARRMA KRATON 6s exb v2 - v5 chassis we've all had this happen or saw it happen and it sucks the chassis is then and weak between the rear bull head and the motor mount and it's very easy to bend even the "7075" EXB chassis
What's GREAT about this is it was designed to work with the new v2 rear chassis brace or any other brace on the KRATON 6s line (so it's a 1st) also being made of 6061 (certified) aluminum it still allows the RIGHT amount of flex and the perfect amount of strength so it holds its form...
I install a NEW EXB chassis especially to put this to the test and we TEST it out (stay til the end) and show how EASY this installs
Make sure to check out @m2cracing168 website linked below
#m2c #cnhl #rc4life #arrmaworldwide
M2C for all your EXTREME bashing need:
m2cracing.net/
THANKS FOR THE SUPPORT please LIKE an SUBSCRIBE if you wanna see more content
HUGE thanks to KCrc for the ramp (link below)
HUGE thanks to @ChinaHobbyLine (link below)
HUGE thanks to M2C racing (link below)
✅⬇️⬇️ ✅⬇️⬇️
SUPPORT THE VETS:
Operation RCs For Vets 🇺🇸 🪖🫡 💥
www.paypal.com/donate/?hosted...
Links may be affiliate links that I could make a small commission off of a qualifying purchase (this does NOT cost you any more) an really helps the channel
CHANNEL SPONSORS
CNHL batteries:
bit.ly/3JPaGxS
Facebook @ ChinaHobbyLi...
HOBBYWING NORTH AMERICAN:
www.hobbywingdirect.com/
/ hobbywing.na
Hitec:
hitecrcd.com/
RC PALs network:
RatBoss888?m...
M2C for all your EXTREME bashing need:
m2cracing.net/
RC4us merch shop:
rc4us.myspreadshop.com/
KCrc upgrades and ramps facebook:
kcrc2020?mib...
KCrc website:
www.kc-rc.com/
Garage life rc website:
garageliferc.com/
RAMJAM racing
Website:
ramjamracing.com/
Facebook:
profile.php?...
TH-cam:
/ @ramjamracing
ARRMA SKINZ the toughest chassis skinz on the market get yours here:
www.arrmaskinz.com/
Team Corally:
corally.com/
Official Facebook fan page
Team.Corally...
What powers RC4us
HOBBYWING , CNHL, M2C
Anyone wanting to sponsor the channel or have a review done by me please email at
rc4us1@gmail.com
AFFILIATE LINK:
RC4us Amazon store front the easiest place to find all the products I use for bashing an my content:
www.amazon.com/shop/rc4us?ref...
List of all the cars on the channel
ARRMA FIRETEAM 6s m2cified
ARRMA OUTCAST 8s EXB rtr
ARRMA OUTCAST 6s m2cified
ARRMA OUTCAST 4s v2.5
ARRMA KRATON 6s EXB v2 rtr
ARRMA KRATON 4s XXL
ARRMA KRATON 4s v2
ARRMA MOJAVE 4s
ARRMA INFRACTION 3s blx
ARRMA INFRACTION 6s
TRAXXAS SLEDGE m2cified
TEAM CORALLY KAGAMA 6s
AXIAL SCX24 jeep
LOSI MINI-T
ARRMA GRANITE GROM
ARRMA TYPHON GROM
1/18th ECX RUKUS
BEZGAR HP161
Nice lil addition, they deff like to bend there. Nice to have an option that doesn't run the full length. Been having a rough time w/ mine getting a consistent bash as well. Taking mine to a local bash tomorrow hosted by our LHS and they are bringing freshpark ramps. It'll be interesting to hit the "big one" as i'm almost exclusively a dirt jumper.
Nice rip, nice sends
Awesome video, and great installation and bash even if cut short!! Thanks for rpunishing the parts!!
Those braces work, but the ones I have are titanium. CRCU and Scorched RC both make the titanium version’s. The aluminum ones will do the same thing. I found that the Ti ones last longer especially if you bash at skateparks. Looks forward to see how it works out for you.
yes and titanium makes sparks but this is different because it allows for use with the new exb v2 rear chassis brace with the 2 screws thru the chassis
@@RC4us yes that’s very cool. M2C is always innovating. I talked to Avery about using titanium. He basically said it’s just way too expensive here.
Nice video! Very informative! Thanks a lot!
thanks for watching brother
Awesome video bro! Good walk through of all the upgrades and parts.
Looks like a great piece of machinery that will help stiffen that chassis !
I need me one of those fresh park ramps!
This comment slipped past me but thanks I appreciate
Yeah these ramps are awesome a lot to drag around and set up but man once you do it's so fun sending them
good vid, nice product
thanks buddy
Thanks!
dude thanks a million this is the 1st super thanks for the channel i will definitely give you a huge shout out
Nice video Mike! Is it possible that brace support will work with an EXB roller chassis?
it will it works with the standard blx v5 up to the newest version v2 EXB with the rear brace that has 2 screws... and it works with the aftermarket rear braces like me having m2c braces i just used a m4x5mm screw with lock nut for the 2nd hole to really attach it
@@RC4us Thank you Mike! That’s awesome. I’m going to order this for my Kraton.
Killer upgrade man. I have a V5 with some M2C goodies on it, I have the M2C chassis as well. I had a question. Where can I get one of those metal / steel chassis brace. It looks like an M2C piece, but I dont see that anywhere on the website. Appreciate any feedback. Happy Bashing!
@@johnboy5632 it should be on their website they just announced the one for the Mojave chassis like yesterday I will look for a link to it
@@johnboy5632 here you go
m2cracing.net/shop/shop.php#!/M2C-3056-KRATON-6S-SKID-PLATE-BRACE/p/683908893/category=161585845
@@RC4us hey man thanks for the response.. ...no I Found the skid plate. I was talking about that Tower to tower Chassis Brace from m2c? It goes straight across.....I have the original red aluminum chassis brace but I'd like to upgrade to that m2c steel one. Did they discontinue that piece?
@@johnboy5632 ok so the 2 piece tower to tower brace i have is from KCrc not M2C.... m2c is making a similar type of tower to tower brace but only for the 4s arrma cars
@@RC4us Ooh ok. Is there a link you can share to that website to get one of those?
Are these on the M2c site for sale
@@SMCracing not just yet will be soon testing is about done just making sure they are up to par
My k6 exb chassis bent right at the rear bulkhead so this would probably of prevented that
it absolutely will and it could possibly pull it straight depending how bent it is... i would buy it and install it 1st if the old chassis is to bent for the brace to pull it straight then hit jennys for a new one