Husqvarna 460 Rancher Chainsaw | Box Opening | Review | 24" Bar
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- I’ll be reviewing a Husqvarna 460 Rancher Chainsaw today. We’ll take this out of the box, put together, and gas it up. After the unboxing we'll take it outside and cut up some logs. It was raining a bit, but still cut just fine.
Affiliate Links:
Support Our Farm: linktr.ee/nicholscounty
460 Rancher 24 inch Bar: amzn.to/2PwC2jp
460 Rancher 20 inch Bar: amzn.to/3b9EFQs
Carrying Case: amzn.to/3e3yEXn
Thanks for watching
*Update, this thing is still awesome, 14 months from purchase, moderate use, no issues.*
I always got Husqvarna because I always got a good product for the money my most recent purchase from them was a Husqvarna 545 mark 2 Xforce and it does an excellent job
Yeah I really like both of my Husqvarna chainsaws. They do do an excellent job.
How many cost this machine
Saws like this make me wanna drink beer and vote for Trump
Merica
I'm just not sure how to take that. I quit drinking in 87, and wouldn't vote for the orange ahole if my life was on the line. Of course if I was still a drunk, I might feel differently. After thinking about it, I guess not. It would take some psychedelics for that.
Don’t buy in to all of the guys that are pro Stihl, Echo and Makita etc! They are all good if taken care of and maintained. I have a Husqvarna 350 that is 15 years old that cuts anything I throw at it! And just bought a 460 and it is a fantastic chainsaw!
It really is.
I agree 100% I'm an average Joe who cuts a lot of wood, mainly to heat the house and I've use poulan pros for as long as I can remember, we had a little green 16 inch that kicked ass for almost 15 years before we retired her, its all in how you take care of them, stihls kick ass but when you get in to the pro grade saws it's all preference, I am fairly partial to husqvarna though as they make poulan saws and the few husquies I've used blew me away. But once again, all preference
Same here!! I have a 16 yr old 350 and it still runs like a champ. Keep it maintained and it'll perform. I do however run ethanol free fuel I stead of regular 87 octane.
Your kidding me.
that button is your decompression valve to make starting easier.it will pop back out when the engine fires.I've been informed by a good source that the oiling system is not the best so I'm running mine with oil set to max(three position screw on underside.turn antisocial to increase flow)and I'm using 100 rather than 150(sorry,can't remember the units it's measured in)as it's not as tacky and flows easier.the higher the number,the more tacky it is.use 150 on all my other saws.week worth regularly greasing your clutch bearings and sprocket with longer bars,though should be standard practise.I never bothered for years but bought a 395xp with a 36" bar so thought it best to stick to that discipline. best of luck with your new saw.stay safe and lucky.maddog.tree surgeon in West cork,eire
Thanks for all the info. I'll be sure to check that out on my saw.
I just got my husky 460. My box that it came in wasn’t so fancy though.
You won't regret that purchase!
@@NicholsCounty
Better not. It wasn’t cheap😄
Same here. I got it from Tractor Supply.
The button on top is the decrompression valve
Thanks.
Get rid of that factory safety chain and get a full chisel you will be good to go
Thanks for the tip.
Lmao I’ve never seen anyone use a funnel to pour oil and gas lmao!
Well, that's what they're made for.
Button is decompression. Your 450 should have it too. I never use it though
Thanks! Yeah, I've never used it either.
@@NicholsCounty just bought a 460 today after watching your video! Lol.
@@r6master69 Awesome!
I've owned every kind, type of chainsaw made. Including a two man Drisson which I still have and runs. Folks just stop right here and empty the shopping cart. This Husqvarna 460 rancher beyond a doubt is the worse of the worse. Forget the actual price I paid years ago but over five hundred for sure. Always kept my gas power equipment in perfect condition. Cleaned and drained of fuel after each use. But this one I used maybe three times the other incidents was in and out of repair shops during warranty and after warranty I tried to keep this running. I've been working on gasoline and diesel engines since I was ten years old now 83. This one I'm giving up. Still looks like the day I pulled it from the box and when I smash it with my tractor loader I'll try and video it. I wouldn't want to curse anyone with this piece of... As for you Husqvarna manufacturers I can see why the ones on the shelf at tractor supply have a inch of dust on them.
Thanks for the insight. Mine is still running strong.
Your chain is way too tight
Thanks for the tip!
I'm thinking about getting one of these. In your opinion is it worth it?
Yes. I had a tree fall down last week in a storm. I grabbed my 450 and 460. Headed out used the 450 until it ran out of gas, grabbed the 460 and the difference was noticeable right away; a lot more power and it was just faster to cut.
I have one and I love it and I use it alot
if its not to late id buy a stihl, my wife bought me a 460 in sept, out of the box it is a pig, wont idle, bogging, so i still grab my 25 yr old stihl 023, 16” bar, has never failed to start. I ordered a 20” bar and chain for the husky the 24” is to big for my use, when i put the new bar and chain on i will tune this hard starting bitch and it should be a good runner.
@@robertpowers7856 It will be after you tune it, mine cranks on the second about everytime
@@robertpowers7856 your carb is prolly just out of adjustment
I think you chain it's too tight
I got one two weeks I go in tractor supply
It worked just fine. Thanks for the tip.
your chain is smoking.sign of oil starvation.keep checking that she's throwing it off the bar tip
Good tip. Thanks.
What size of bar do you have on it?
24 inch
he's a 24" bar on her. 20" is a better option for that model in my opinion, but I've a 395xp with a 36 inch bar to cope with the bigger jobs.stay safe and lhcky.maddog.tree surgeon in West cork.eire
chain saiz bar 72 84dl
Ok.
You need to stick with the poulan WILD THANG and get ya some experience
I like the Husqvarna.
poulan saws are crap
The problem with a Poulan is when starting it up, you will be poulan and poulan and poulan and it probably still won't start! LMAO
Not dogging you but seriously dude that thing is a slug!! I did month’s research before I bigot my saw I didn’t want still or husq I found a hidden gem called a makita 5600 will make that husq look like a toy saw for girls 60 cc only making under 3 horsepower that’s ridiculous all noise and no go at 8000 rpms makita 5600 56cc over 4 horsepower and 13800 rpm made by dolmar hand assembled the one set of hands in Germany all for 400$
Awesome, works great for what I need it for. I'm sure there are plenty of better ones around, thanks for the input.
I ended up buying an Echo timberwolf. Couldn't be happier with it.
Which company is now out of business. Good luck finding parts. I have a Dolmar 6100 that I truly love, but it has been on the shelf for months because I can't buy a coil. I've gone through 2 aftermarket Chinese coils in a few months and won't buy another. Now Makita is all electric. Its a crying shame.
@@danielmoulton4117 dolmar was bought by makita the turquoise colored battery power tool company and just rebadged the chainsaws still have the burnt red and black color Same company new owners
A Little bit Boring
Yeah this was one of my first videos, thanks for the feedback.
New Sub Here. Thanks for this video. I am looking at getting this saw
#slackoutdoors
Thanks for the sub! I love this one, cuts through some big trees and it's chainsaw season right now!