Excelentes torres para cargar los autos, felicidades por tu trabajo amigo, te hago una recomendación, métele una tuerca a la varilla roscada para que después de ajustar la altura requerida la aprietes y te dé mejor seguridad...
next time don't weld the nut to the washer and leave the nut free spinning. This way you can throw on a wrench and raise or lower the rod. Might be hard to turn with a bunch of weight but there are ways around that too.
I would use more metal and weld more of it but this is already better than a dollar store jack
That's great ! It's stronger than some of the readymade one's that you can buy. The angle iron makes it stronger and more reliable.
Grate machine, holding!
Excelentes torres para cargar los autos, felicidades por tu trabajo amigo, te hago una recomendación, métele una tuerca a la varilla roscada para que después de ajustar la altura requerida la aprietes y te dé mejor seguridad...
good idea
Saludos desde Colombia
the work is good but the 2 car jack not enough & not safty
next time don't weld the nut to the washer and leave the nut free spinning. This way you can throw on a wrench and raise or lower the rod. Might be hard to turn with a bunch of weight but there are ways around that too.
there is to much wiggle room to leave loose.
👍👍👍
👌
سلام داداش گلم یکم دیگه فیلم میگرفتی پیچ زیرش شکسته بود اون جک برای نیسان ضعیفه
The whole wait is only supported by a 12mm tall, 2mm thick thread! :( :( :( :(
No way made for less than $4. Even if you already had the metal it was paid for at some point
Hahahaha 😂
Economical
Learn to lay a bead this is a death trap.
Just make sure the thread holds, wouldn't want to be working on the dif and having that vehicle fall
But great design
this is visual carnage, lear to orient the camera the right way before making us vomit.
இது வேறு ஜாக்கி அது ஹேர் ஜாக்கி fake video
Bad idea
👍👍