Hi. I have an hp colorlaserjet mfp m182n that uses hp 216a color toner cartridges. After refilling I have observed that the printed page is darker on one side and lighter on the other. I mean the page is lighter on one end and darker on the other. I have checked that the spacing and alignment of doctor blade but the problem still persist. Can you kindly help?
Are you sure the the alignment of the doctor blade is correct? Is the toner on the toner roller uniform? Check the side panels, check if the drum is in contact with the toner roller in all its lenght
Rempve all USB cables and devices, remove the ehternet cable if present, try to reinstall the firmware. It's difficult to say because it could be due to a lot of reasons
Блимають три крапки. Хоча картридж заправлений, але друкує світло сірим, наче тонер закінчився. Хтось може допомогти? Це мій новий Принтер, я не знаю що робити
I have orange light "exclamation mark" blinking. No error is displayed. I am unable to understand. Can you please help?
The manual says that the printer doors (cartridge cover or rear cover) might not be closed properly. .
Same problem here. Do you resolve this ?
@@mathieutrottier5054 Read the answer
Hi, err 75 any suggestion what might be?
try to connect directly to a power outlet on the wall, or change electrical cable
@@viandant5 Thanks for your reply, I have tried your suggestions but still the problem persists
@@osmokewins It could indicate a problem with the printer’s memory or firmware or even the toner cartridge
Hi. I have an hp colorlaserjet mfp m182n that uses hp 216a color toner cartridges. After refilling I have observed that the printed page is darker on one side and lighter on the other. I mean the page is lighter on one end and darker on the other. I have checked that the spacing and alignment of doctor blade but the problem still persist. Can you kindly help?
Are you sure the the alignment of the doctor blade is correct? Is the toner on the toner roller uniform? Check the side panels, check if the drum is in contact with the toner roller in all its lenght
@@viandant5 yes I am sure about alignment of blade and contact of toner roller. Is there any other possible issue?
@@hathakker802 Defective charge roller, broken supports of the charge roller, worn drum, deformed frame of the printer
My printer is m234sdwe and has both the amber light and white i blinking. what does that mean?
The amber light is the light of the toner low if I understood well
Hi sir
There is a error 49 in hp m233 laser printer what could be the solution,even hp service center has no solution for this problem
Rempve all USB cables and devices, remove the ehternet cable if present, try to reinstall the firmware. It's difficult to say because it could be due to a lot of reasons
@@viandant5 thankyou sir..I ll try
Hi my printer has the problem below what is the solution Er 80 hp laser jet 236
It's probably a network card error
@@viandant5 what is the solution
it will be change?
@@khanHabib-pj2nb I think you have to change it
How to refill tone cartridge in laser jet HP 236
th-cam.com/video/vcsa7iK9t5M/w-d-xo.html
The machine was showing that there's no paper there but there is paper, what can I do?
check if the correct paper cassette is selected, check the paper settings. it could be a paper sensor
BRO YOU HAVE A FACTORY WHY NOT GET ONE
Error 03?
try to clean the pick-up rollers. check if there is paper jammed in the printer
Блимають три крапки. Хоча картридж заправлений, але друкує світло сірим, наче тонер закінчився. Хтось може допомогти? Це мій новий Принтер, я не знаю що робити
it could be a damp sheetr, try to insert new paper. it clud be also a defective toner cartridge, or the transfer roller
Я спробувала скинути налаштування чипу через ip адресу принтера. Побачимо чи допоможе це. @@viandant5