Definite improvement, great piece of sleuthing to find the problem and nicely machined solution. Commiserations to the vice, occupational hazard they are used to though!
Could watch these all day. You guys are genius on these rifles. I’d be disappointed if I had bought some of the rifles you have sorted. I have an R10 with one of your probes on it. It does shoot ok but your videos just put that little doubt in people’s minds😂😂😂. Great engineering and videos.
It really is all in the detail ,,, great job. Im willing to bet it wont be long before either those vise jaws are faced , or remade though , that witness mark would drive me nuts.
Absolutely brilliant jake , I honestly don't know how you found that problem with the pellet not seating in the barrel properly but you're solution was spot on as always mate 👍
It’s somebody like you Jeff a skilled engineer who knows a rifle inside out and get the best out of it! Instead of the nonesense they churn out nowadays!
All your videos are so interesting that I am sure that you can make an air rifle that is stronger and more wonderful than all the companies. I take my hat off and thank you very much for this wonderful channel. I wish you more successes in the future.
Excelente trabalho! Não sei se a arma é sua ou do seu cliente, se fosse minha eu teria aproveitado o serviço, retirado o anel de vedação do pino e colocado dentro do cano !!!
A neat solution to a pesky problem. I wonder how many people are now checking their barrels to see if they need a pin probe 🙂 have you made a new piece for the vice yet, or are you leaving it battle scarred? Look forward to the magazines as they have been a problem for a while.
I had an R10 years ago, and feel there is a fundamental flaw in the design of the hammer; It's mass is not concentric with the shaft, making it prone to fluctuation through friction. I'd like to see your assessment of this and possible remedy.
🦉 Que bien tengo el 2 y por fin parece que han acertado con la valvula lo demas estoy contento y me gustara mucho como lo afinan a minimos para ver resultados espero que muy buenos, gracias@@sub12airgunners How good I have the 2 and finally it seems that they have got the valve right. The rest I am happy and I would really like how they tune it to a minimum to see results, I hope very good, thank you
Well done Jeff ! Trouble is though the average shooter may not own a laith or have access to one! It’s bsa quality control that is at fault here! This rifle costs over £1000 and it is a bloody disgrace that they put out a product that is full of faults! I for one will never buy bsa again! Fraser!
In awe of your machining as usual. Really didn’t think the longer probe would make much of a difference but clearly has improved things!
to be honest i didn't hold much hope but it's always worth a try, this time it payed off 😀😀
Definite improvement, great piece of sleuthing to find the problem and nicely machined solution. Commiserations to the vice, occupational hazard they are used to though!
thanks, yes a tad irritating i hit the vice but it will teach me to check properly 🙄
Could watch these all day. You guys are genius on these rifles. I’d be disappointed if I had bought some of the rifles you have sorted. I have an R10 with one of your probes on it. It does shoot ok but your videos just put that little doubt in people’s minds😂😂😂. Great engineering and videos.
thank you 👍 thanks for watching 😀
Nice fix and good work thanks, Small end mills what a nightmare.
thanks for watching 👍
You do amazing machine work sir👍👍👍👍
thanks for watching 👍👍
I'm in awe of your capabilities & skill, must be fantastic knowing all that stuff you do.. Brilliant work..
Thank you very much👍
Great bit of machining. Great results. 👌
thanks for watching 👍👍
Awesome work as ever Jake ,transformed the rifle .
thanks Martin, it's getting there now 👍
It really is all in the detail ,,, great job.
Im willing to bet it wont be long before either those vise jaws are faced , or remade though , that witness mark would drive me nuts.
😂😂 yes i think you may be correct 😂 thanks for watching 👍
Absolutely brilliant jake , I honestly don't know how you found that problem with the pellet not seating in the barrel properly but you're solution was spot on as always mate 👍
thanks phil 👍👍
More great work Jeff, we always learn some thing from you, so many thanks for all you do and share with us Cheers 👌👌👌👌👍👍👍👍👍👍
thank you 👍 thanks for watching 😀
Superb video Jake the probe is a pure gem
thank you 👍 thanks for watching 😀
It’s somebody like you Jeff a skilled engineer who knows a rifle inside out and get the best out of it! Instead of the nonesense they churn out nowadays!
All your videos are so interesting that I am sure that you can make an air rifle that is stronger and more wonderful than all the companies. I take my hat off and thank you very much for this wonderful channel. I wish you more successes in the future.
thank you and thanks for watching 😀
Great video and superb work as always. Would love to see you work your magic on a springer. Keep up the good work.
thank you, haven't had a play with a springer for a time 😀😀
Mint. Fantastic video always 👏
thanks for watching 👍👍
@@sub12airgunners fucking hell mate, your a very clever fella. You. Must love airguns to the absolute bloody maximum. Love it 😀
Excelente trabalho! Não sei se a arma é sua ou do seu cliente, se fosse minha eu teria aproveitado o serviço, retirado o anel de vedação do pino e colocado dentro do cano !!!
yes that's a great idea 👍👍
Lovely bit of work you now got an air rifle as to a shotgun 😁👍
thank you 👍 thanks for watching 😀
Great work. Decent 50m groups
thank you 👍 thanks for watching 😀
Amazing results, great video as always👍🏼
Thank you Cheers 😀
Amazing work and a major improvement for sure, love your videos 👍
thank you 😊😊
Brilliant, fantastic engineering 👍👌
Thank you! Cheers!
A neat solution to a pesky problem. I wonder how many people are now checking their barrels to see if they need a pin probe 🙂 have you made a new piece for the vice yet, or are you leaving it battle scarred? Look forward to the magazines as they have been a problem for a while.
lol, not happy about the vice ☹ but i might leave it to make me check properly in the future 😂😂
As always pure quality 👏
thanks mate 👍👍
Going by yourwork here, i just know you will have to reface that vice jaw!
😂 yes i think so 😀
If sub12 made airguns they'd most definitely be the best in the world 😂
thank you 👍 thanks for watching 😀
Great vid as usual,where can iget one of your depinggers for a Uragan 2?
we do them in batches when we get time we will do more but cant say when 👍👍
Might it be better to rebate the probe o-ring within the barrel or just before the barrel area?
yes if we had decided to re- barrel and make a new probe we would have done that but as we was trying different things we ended up do it this way 👍
I had an R10 years ago, and feel there is a fundamental flaw in the design of the hammer; It's mass is not concentric with the shaft, making it prone to fluctuation through friction. I'd like to see your assessment of this and possible remedy.
Rti prophet 3 please tell me what you would like, cheers
we do want to do the prophet soon 👍
🦉 Que bien tengo el 2 y por fin parece que han acertado con la valvula lo demas estoy contento y me gustara mucho como lo afinan a minimos para ver resultados espero que muy buenos, gracias@@sub12airgunners
How good I have the 2 and finally it seems that they have got the valve right. The rest I am happy and I would really like how they tune it to a minimum to see results, I hope very good, thank you
Marvelous
thanks for watching 👍👍
Você fabrica martelo pesado para pcp cricket 2?
no sorry we don't
I got to say at 50 yds those groups look good. Good job as always!
thank you, yes it's doing the job now
Must admit I find the machining quite therapeutic.
It is strange but lots of people say that, we didn't show it at the beginning as we thought people would get board with it 😁
nice one 😀
Thank you! Cheers!
Wow
thanks for watching 😀
Well done Jeff ! Trouble is though the average shooter may not own a laith or have access to one! It’s bsa quality control that is at fault here! This rifle costs over £1000 and it is a bloody disgrace that they put out a product that is full of faults! I for one will never buy bsa again! Fraser!
how could BSA make such a beginners error ?
i think it's just poor QC 🙄it is a shame that this sort of thing still happens, but to be fair it happens to all makes not just BSA 😔
Tôi muốn mua sản phẩm nồng súng FX tôi ở Vietnam. Dùng đạn chì slun 23g đạn 5.5
👍