Universal Replacement Infrared Sauna Controller

This video guides you through the process of changing over your existing Home Infrared Sauna Wall Controller to our Universal Replacement Wall Controller. This demonstration is being done on a Luxo Taavi 4 Person Corner Unit.
All Electrical work must be undertaken by a Licensed and Competent Professional in your Local Jurisdiction.
All parts found in this video are available from our online store at; infraredsaunar...

[@danielkitson9306]

Where do you buy the master controller keypad?

[@infraredsaunarepairs5982]

Hi Daniel, we do have a few of the controllers. Do you have the exact same control system? Feel free to send details to [e-mail]

[@shawnstelte8797]

Our 2004 sunlight sauna model Phoenix 3.
Temperature will not go past 119° and them quickly drops down to 114°. Thanks Tim

[@derekpeters8347]

My sauna get up to 107° and then starts cooling off. I have it set on 140°
I need to fix it. Any ideas?

[@IreneVinci-kn6ft]

I'm so happy to find this video. My sauna works fine but blows the circuit breaker when the timer ends. Do you have any suggestions? Thanks. It's a health mate 2001

[@infraredsaunarepairs5982]

Hi Irene, I am glad you found it! I'm familiar with the Make, are you able to send a few photos and reach out via email, I would like to run through a few tests with you before I give you any suggestions. [e-mail]
Allan

[@NowPleaseReadThis]

Hi, My sauna cuts off the FIR panels at 140f. Problem is 140 is not enough temp for me to sweat without the radiant FIR. In a regular sauna I like 175-180f so I can sweat. So in my FIR sauna I am sitting there with the FIR turned off at 140f while I wait to sweat. Is there a way I can raise the cutoff of the FIR panels say at 160f? or whatever temp I choose? Thanks!

[@infraredsaunarepairs5982]

Hi, the fact that your FIR heaters are turning off while you are tying to sweat is a problem for the Infrared style of heat. These are best designed when the unit is able to be set to 149f but never reaches that temp as the heaters are designed to achieve around ~140f and stay on throughout the duration of your session. This way the infrared light is always working to heat your body and create a great sweat. Reach out via email, I might have some ideas that could help your situation. [e-mail]

[@reecesfootball]

I have power to only one side. I have checked and the heat panels themselves are fine. I have also switched the connections up on the power supply and the ones that didn’t work still didn’t. Should I rewire or is it power supply

[@infraredsaunarepairs5982]

Hi Reece, if its consistently the same side not functioning I would check the plug as the cable goes down the wall, something could have happened inside the connection. failing that I would do a continuity test on the cables from the back of the heater to the power supply. feel free to send pictures, I might have come across the unit before; [e-mail]

[@shawnconnelly1]

When I turn on my sauce all it does is beep with no lights on the inside control panel. Happend before and I unplugged everything and plugged back in at the control box and went away. Hasnt been used much. Any ideas?

[@infraredsaunarepairs5982]

It could be as simple as the switching powersupply is on the way out. Have you tested the voltage on the secondary side of the powersupply? Feel free to send some photos via email, I'll take a look and advise further
[e-mail]

[@RaveTheFave9523]

Please, please tell me the exact model of this sauna! I have the 2 person one and I am having such an issue with figuring out which wire goes where. Please and thank you!